What are the reasons for the failure of the Lavida car window to move up and down?

What size can a 1306010 tire be replaced with?

1306010 tires can be replaced with 3.5-10 tires. Below is an introduction about tires: 1. Introduction: Tires are circular elastic rubber products mounted on various vehicles or machinery for ground rolling. In 1845, R·w· Thomson, a civil engineer born in Scotland, invented the pneumatic tire. 2. Specifications: Specifications are the geometric parameters and physical performance data of tires. Tire specifications are commonly represented by a set of numbers, where the first number indicates the tire section width, and the second number indicates the rim diameter, both in inches. The letters or symbols in between have special meanings: "x" denotes high-pressure tires; "R" and "Z" denote radial tires; "-" denotes low-pressure tires. 3. Ply Rating: Ply rating refers to the nominal number of cord layers in the tire rubber, which may not exactly match the actual number of cord layers. It is an important indicator of tire strength. The ply rating is marked in Chinese characters.

19

5

Share

Where is the drainage hole location for the Roewe 350 car door?

The drainage holes for the Roewe 350 car doors are located at the lower edge of the doors, typically with two drainage holes per door. Below is some relevant information about the Roewe 350: 1. Vehicle Positioning: The Roewe 350 is a compact sedan positioned in the A-segment market, launched by SAIC Motor following the Roewe 750 and Roewe 550, with dimensions of 4521/1788/1492mm (L/W/H). 2. Powertrain: The Roewe 350 is equipped with a 1.5T Hyperboost turbocharged engine, delivering a maximum power of 95kW (129PS) at 5500rpm and a peak torque of 210Nm between 2000-4400rpm, paired with either a 6-speed manual or 6-speed automatic transmission.

7

3

Share

What details should be paid attention to when picking up a car?

"Check the car's exterior, interior, tires, engine, etc. Here are the specific details: 1. Check the vehicle production date: If the interval between the vehicle's production date and the pickup date exceeds 6 months, it is considered a stock car. The production date should be within 3 months. The specific method to check the vehicle production date is to look for the label directly embossed on the door frame of the main driver or passenger door. 2. Check the vehicle's mileage: Checking the vehicle's mileage is not just about looking at the odometer. Check the wear level of the vehicle's tires, then look at the odometer, and finally open the engine compartment, pull out the oil dipstick, and check if the oil on the dipstick is cloudy. Severe tire wear and cloudy oil indicate that the car has been driven more. 3. Check the vehicle's paint: The paint of a new car is applied automatically by computer. During transportation, the vehicle is easily bumped and scratched, making it a transport-damaged car.

10

3

Share

Can a Hybrid Vehicle Fail to Start When Out of Battery?

Hybrid vehicles do not necessarily fail to start when out of battery. Here are the specific details about hybrid electric vehicles: 1. Auxiliary Power System: When the battery level drops below 60%, the auxiliary power system activates. When the vehicle's energy demand is high, the auxiliary power system and the battery pack work together to provide energy to the drive system. When the energy demand is low, the auxiliary power system not only supplies energy to the drive system but also charges the battery pack. 2. Hybrid Models: Hybrid vehicles include models like the Lynk & Co 01, BYD Song, BYD Qin, BYD Qin Pro, and BMW 7 Series. Taking the BMW 7 Series as an example, it is a large-sized vehicle with dimensions of 5250mm in length, 1902mm in width, and 1498mm in height, a wheelbase of 3210mm, a fuel tank capacity of 46 liters, a trunk capacity of 420 liters, and a curb weight of 2190kg.

19

4

Share

What is the diameter of 14-inch and 12-inch tires?

14-inch and 12-inch tires have diameters of 27cm and 47cm respectively. Below is an introduction about tires: 1. Introduction: Tires are circular elastic rubber products mounted on various vehicles or machinery for ground rolling. In 1845, R·w· Thomson, a civil engineer born in Scotland, invented the pneumatic tire. 2. Specifications: Specifications are the geometric parameters and physical performance indicators of tires. Tire specifications are commonly represented by a set of numbers, where the first number indicates the tire section width and the second number indicates the rim diameter, both measured in inches. The letters or symbols in between have special meanings: "x" denotes high-pressure tires; "R" and "Z" denote radial tires; "-" denotes low-pressure tires. 3. Ply Rating: Ply rating refers to the nominal number of cord layers in the tire rubber, which may not exactly match the actual number of cord layers. It is an important indicator of tire strength. The ply rating is marked in Chinese.

10

0

Share

What Causes Noise in Car Air Conditioning?

The causes of noise in car air conditioning can be divided into internal and external noises within the air conditioning system. Below are detailed explanations and solutions: 1. Internal noise in car air conditioning: Internal noise mainly comes from the dashboard area, with the following possible causes: 1. A sound similar to flowing water is heard from the glove box when the air conditioning is turned on. This is the normal operation of the air conditioning expansion valve. 2. Noise within the air conditioning ducts. The air filter has not been replaced for a long time, or there are foreign objects like leaves in the ducts. Solution: Open the air filter cover under the passenger side toolbox, cover it with a gauze bag, start the car, and set the fan to the highest setting to blow out the foreign objects. Alternatively, a repair shop can use high-pressure air to remove the objects. 3. Air or moisture in the refrigerant inside the air conditioning compressor, causing noise during refrigerant evaporation and expansion. Solution: Extract and replace the refrigerant. 2. External noise in car air conditioning: 1. When the compressor lacks lubricating oil or the oil is used improperly, severe noise may occur inside the compressor, potentially leading to wear and failure. Solution: In such cases, check if the clutch is slipping, inspect the drive belt, and ensure the lubricating oil is used correctly. 2. The compressor electromagnetic clutch is another common source of noise. The compressor often operates under high load, shifting from low to high speeds, placing high demands on the electromagnetic clutch. Additionally, the clutch is usually installed close to the ground and frequently exposed to rain and dirt. If the bearings inside the clutch are damaged, noise will occur. Solution: First, check the air conditioning belt to confirm if the mounting screws are loose, if the belt is oily, or if it is worn. If the electromagnetic clutch is faulty, it should be replaced. 3. Check if the engine is leaking oil. Solution: Top up the engine oil.

15

4

Share

What are the reasons for the failure of the Lavida car window to move up and down?

What size can a 1306010 tire be replaced with?

Where is the drainage hole location for the Roewe 350 car door?

What details should be paid attention to when picking up a car?

Can a Hybrid Vehicle Fail to Start When Out of Battery?

What is the diameter of 14-inch and 12-inch tires?

What Causes Noise in Car Air Conditioning?

Which country produces Ora cars?

What does it mean when the ECO light comes on in the car?

What is the Chinese name for the Nissan Armada?

Is it okay to refuel only when the fuel gauge reaches the red line?