What are the reasons for the failure of the electric adjustment of the Tiguan seat?

1 Answers
StIsabella
07/29/25 7:57pm
Electric seat adjustment failure may be due to a damaged adjustment switch, a burned-out adjustment motor, or a circuit fault. Many cars are equipped with electric adjustment seats, which have internal electric adjustment mechanisms. If these mechanisms are damaged, the seat cannot be adjusted. The main faults and troubleshooting methods for electric seats are as follows: 1. The control system does not work or makes noise: ① Check the grounding condition of the solenoid valve to the body. If the grounding is poor, the control system will not work. ② Use a test lamp to check the circuit breaker on the fuse panel. If the indicator light is on and there is a clicking sound from the seat relay, the fault may lie with the motor. ③ Before inspecting the relay and motor, also check the voltage at the switch, as the fault may also be with the switch. 2. The seat motor runs, but the seat does not move: Check whether the rubber coupling between the motor and the transmission is worn or damaged.
Was this review help?
3
5
Share
More Forum Discussions

How Many Liters of Transmission Fluid Does the Vezel Need for a Change?

Approximately 4 liters. Transmission Fluid: Transmission fluid is an oil product that maintains the cleanliness of the gear system, providing lubrication and extending the lifespan of the transmission components. It ensures highly effective lubrication even at low temperatures and reduces oil loss under harsh operating conditions. Replacement Interval: Transmission fluid is an oil product that maintains the cleanliness of the gear system, providing lubrication and extending the lifespan of the transmission components. It ensures highly effective lubrication even at low temperatures and reduces oil loss under harsh operating conditions. Long-term failure to replace the transmission fluid not only affects operation but also degrades the fluid's performance, reducing lubrication effectiveness and accelerating wear on transmission components, increasing the likelihood of malfunctions.
9
1
Share

At what temperature does the Jeep Compass radiator fan start to rotate?

Jeep Compass radiator fan starts to rotate above 95 degrees Celsius. Composition of the radiator: The radiator is responsible for cooling the circulating water. Its water pipes and cooling fins are mostly made of aluminum. The aluminum water pipes are made flat, and the cooling fins are corrugated, focusing on heat dissipation performance. The installation direction is perpendicular to the direction of air flow, striving to minimize wind resistance and maximize cooling efficiency. Contents of the radiator: The cooling water inside the radiator is not pure water but a mixture composed of water (meeting drinking water quality), antifreeze (usually ethylene glycol), and various special-purpose corrosion inhibitors, also known as coolant. The antifreeze content in these coolants accounts for 30% to 50%, raising the boiling point of the liquid.
12
4
Share

Should the old Buick Regal use 92 or 95 octane gasoline?

Buick Regal 1.5T models use 92 octane gasoline, while 2.0T models use 95 octane gasoline. Gasoline octane ratings: Represent the octane value of the fuel. The higher the rating, the higher the octane value, indicating better anti-knock performance. Stronger anti-knock properties make the engine run more smoothly, reduce wear, and provide better engine protection. However, higher fuel octane ratings are not always better. Function: Only when the gasoline's octane value matches the engine's compression ratio requirements can it fully utilize power performance and fuel economy. If a low-compression engine uses high-octane fuel, incomplete combustion may occur.
3
4
Share

What is the hold function on the Breeze car key?

On the car, hold means auto hold. The introduction and working principle of the auto hold function are as follows. Introduction to auto hold: Auto hold refers to an automatic braking function. After activating this function, for example, when stopping at a traffic light, you don't need to pull the handbrake, simplifying the operation by avoiding the use of the handbrake or electronic handbrake. Automatic transmission models also don't need to frequently switch between D to N or D to P. Working principle of auto hold: The auto hold function provides precise parking force through a slope sensor controlled by the system. During startup, the parking control unit calculates information provided by the clutch distance sensor, clutch engagement speed sensor, throttle pedal sensor, etc. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly.
20
0
Share

What is the fuel tank capacity of Luxgen?

Luxgen's fuel tank capacity is 75L. Size of the fuel tank: The size of the fuel tank is directly related to the vehicle's fuel consumption. A full tank can typically cover over 500 kilometers. For example, a car with a fuel consumption of 10 liters per 100 kilometers usually has a fuel tank capacity of around 60 liters. Each vehicle model has a different fuel tank capacity. Don't fill the tank too full: In cities with plenty of gas stations, there's no need to fill the tank completely. A full tank increases the vehicle's weight, leading to higher fuel consumption. A larger fuel tank is beneficial in areas with fewer gas stations, as it allows you to drive to more distant stations when running low on fuel, reducing the risk of running out of gas.
3
1
Share

What is the fuel consumption of the 2021 Tayron 380 4WD Luxury Edition?

The combined fuel consumption of the 2021 Tayron 380 4WD Luxury Edition is 7.5L/100km. The above figure is the NEDC combined fuel consumption, which is the comprehensive fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, around 8.88L. When driving, the following 5 tips can help reduce fuel consumption: During vehicle startup, use a low gear to start, gently press the accelerator, and gradually increase speed. Avoid suddenly flooring the accelerator, as this will multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking during operation, thereby making the vehicle more fuel-efficient. By anticipating road conditions and adopting slow, smooth acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular vehicle maintenance or inspections: Timely oil changes can reduce carbon buildup (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per mileage requirements. Close windows while driving. Driving with windows open increases wind resistance. The greater the wind resistance, the more resistance the car faces, requiring more power and thus increasing fuel consumption.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.