What are the reasons for the ETC screen not lighting up in the car?

What is the detailed explanation of Baojun dashboard warning lights?

Baojun dashboard warning lights are explained in detail as follows: Coolant Temperature Warning Light: The coolant temperature fault indicator and dashboard display indicate that the engine coolant temperature is too high, indicating a fault issue. Possible causes include insufficient coolant in the radiator, a faulty coolant temperature sensor, or a malfunction in the cooling system circulation. The vehicle should be stopped and checked immediately; otherwise, it may cause engine damage. Brake Fault Light: When the brake fault indicator light comes on, it may indicate that the brake pads are worn to their limit, there is a loss of braking power, or a short circuit in the wiring. If the brake light malfunctions, the vehicle should be stopped to check whether there is an issue with the brakes and whether the brakes can still stop the vehicle. Drive to a nearby repair shop for inspection promptly. Otherwise, severe braking issues could lead to vehicle damage or fatal accidents. ABS Warning Light: When the ABS warning light is on, attention should also be paid to the vehicle's braking issues. Timely detection and inspection are necessary to reduce safety hazards. Airbag Fault Indicator: When the airbag fault indicator appears, it indicates a fault in the airbag system. The vehicle should be taken to a 4S shop for inspection immediately. Otherwise, in the event of a traffic accident, the airbag may fail to deploy properly. Oil Pressure Fault Light: The engine oil pressure fault light is another common warning light, resembling a boiling kettle. Possible causes include insufficient engine oil or an oil leak in the vehicle. Stop and check immediately; otherwise, it may lead to engine damage.

3

2

Share

How to Start the Sagitar?

The steps to start the Sagitar are: 1. Open the car door and sit in the driver's seat; 2. Press the brake pedal; 3. Press the one-touch start button to ignite the engine; 4. The dashboard lights up, indicating the car has successfully started. Taking the Sagitar 2020 200TSI Manual Fashion model as an example, the car measures 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm and a fuel tank capacity of 50 liters. The front suspension of this model is a MacPherson independent suspension, while the rear suspension is a multi-link independent suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 175Nm, paired with a 5-speed manual transmission.

2

4

Share

Where are the two USB ports in the front row of Golf 8?

The locations of the two USB ports in the front row of Golf 8 are: 1. Near the radio; 2. In the glove compartment on the passenger side. The functions of the USB ports are: 1. Charging mobile devices; 2. Connecting external storage devices to play music. Taking the Volkswagen Golf 2021 200TSI DSG as an example, this car belongs to the compact car category, featuring a 5-door, 5-seat hatchback design with body dimensions of 4296mm in length, 1788mm in width, and 1471mm in height. The Golf is equipped with a 1.2T inline 4-cylinder turbocharged engine, delivering a maximum power of 85kW, a maximum torque of 200Nm, a maximum horsepower of 116PS, and a top speed of 200km/h.

8

2

Share

How to Remove and Install the Sun Visor Clip of Volkswagen?

The method to remove and install the sun visor clip of Volkswagen is as follows: 1. Open the car and locate the position of the sun visor; 2. Find the position of the sun visor fixing clip; 3. Pry open the clip with a flat-head screwdriver; 4. Set aside the plastic card of the clip; 5. Pry open the clip inside the clip; 6. Remove the sun visor. Taking the Volkswagen Bora 2020 1.5L Manual Fashion Edition as an example, this car is a compact car with a 1.5L inline four-cylinder engine, naturally aspirated intake form, maximum horsepower of 113ps, maximum torque of 145nm, 5-speed manual transmission, and a 4-door 5-seater sedan body type. The car's length, width, and height are 4663mm, 1815mm, and 1462mm respectively, with a wheelbase of 2688mm, a top speed of 190 kilometers per hour, front-wheel drive, electric power steering, and a unibody structure.

9

3

Share

What are the battery models for Mazda car keys?

Mazda car key batteries use the CR1620 model. CR1620 is a lithium manganese dioxide battery, named according to the IEC standard. The breakdown is as follows: C - Indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode. R - Indicates the battery shape is cylindrical; if it were square, it would be denoted by F. 16 - Indicates the battery diameter is 16mm. 20 - Represents the battery height is 2.0mm. The nominal voltage is 3.0V, with an endpoint voltage of 2.0V, and a rated capacity ranging from 140-170mAh. The shelf life of a CR1620 battery is typically 5 years. However, if the manufacturer's production standards are low or quality control is poor, the lifespan can be significantly reduced. Top-tier domestic brands can generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can extend further to 8 years or even 10 years. Generally, replacing a car key battery involves just three steps: Step 1: Remove the mechanical key. Press the latch on the side of the smart key to release the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you will see a deep slot and a shallow slot at the top of the smart key. The deep slot is for the keyhole, while the shallow slot is used to open the battery cover. Insert the mechanical key into the shallow slot and pry it open to reveal the coin cell battery. Gently remove the battery. Step 3: Replace the battery. Insert the new battery, then reattach the battery cover and mechanical key in order to complete the replacement.

14

0

Share

Where is the fuse for the Volkswagen Polo wiper located?

The fuse box for the Volkswagen Polo wiper is located on the left side of the center console, specifically behind the panel above the driver's footwell. You can then check the label on the back of the fuse box to locate the exact position of the wiper fuse. When a circuit malfunctions or experiences abnormalities, the current may continuously rise, potentially damaging important or expensive components in the circuit, or even causing the circuit to burn out or start a fire. If a fuse is correctly installed in the circuit, it will melt and cut off the current when the current rises abnormally, thereby protecting the circuit and ensuring safe operation. Precautions for replacing fuses: Before replacing a fuse, turn off the ignition switch and the corresponding electrical device. Always replace the fuse with one of the same rated current value as indicated on the fuse box cover. Do not use a fuse with a higher rated current. If a fuse with the same current load cannot be found, you may use one with a lower rated current. If the new fuse blows immediately, it indicates a possible fault in the circuit system, which should be inspected and repaired as soon as possible.

3

4

Share

What are the reasons for the ETC screen not lighting up in the car?

What is the detailed explanation of Baojun dashboard warning lights?

How to Start the Sagitar?

Where are the two USB ports in the front row of Golf 8?

How to Remove and Install the Sun Visor Clip of Volkswagen?

What are the battery models for Mazda car keys?

Where is the fuse for the Volkswagen Polo wiper located?

What are the differences between the Envision and Envision S?

What is the method for enabling automatic locking on the new Mondeo?

What is the reason why the rear door of a Mercedes-Benz cannot be opened from the inside?

How to Activate the Locking Horn on the New Santana?