···
Log in / Register

What are the reasons for the engine not starting?

4 Answers
StEvangeline
07/25/25 6:13am
The reasons for the engine not starting are: 1. The starter has been used for too long, and the carbon brush is damaged; 2. The battery voltage is insufficient to start the starter; 3. The gasoline pump is damaged, resulting in no fuel supply; 4. The gear is in D gear and cannot be ignited and started; 5. The car engine speed sensor is damaged, causing the vehicle to have no high-voltage spark. The solutions for the engine not starting are: 1. Preheat when the temperature is low; 2. Ensure the sealing performance of the cylinder; 3. Remove the air in the fuel line; 4. Check all pipelines to see if the joints are not tight; 5. Disassemble the injector and clean the needle valve; 6. Check whether the battery circuit is short-circuited; 7. Add sufficient diesel to the fuel tank; 8. Replace the gasoline model used.
Was this review help?
15
1
Share
EmiliaRose
08/11/25 1:02pm
I've had several experiences where my car wouldn't start. The most common issue is a dead battery, such as forgetting to turn off the headlights or leaving the car unused for too long, leading to power loss—sometimes even the dashboard won't light up. Starter motor failure is another culprit, making a clicking sound but failing to start the engine, possibly due to worn brushes or poor wiring contact. Fuel system problems are also frequent, like running out of gas unnoticed or a burnt-out fuel pump failing to deliver fuel, making the engine feel like it's idling. Additionally, dirty or aged spark plugs in the ignition system are more prone to failure in cold weather. I make it a habit to regularly check for corroded battery terminals. For safety, avoid forcing multiple start attempts to prevent circuit damage. It's wise to keep an emergency kit handy, including jumper cables and a voltmeter, to easily diagnose basic issues.
Was this review help?
6
5
Share
Expand All
DeEliana
09/27/25 5:21am
I think the key to the engine not starting lies in the battery and starting system. When the battery voltage is too low, the starting current is insufficient. You can use a multimeter to check if it's below 12 volts. If the starter motor is aging, it won't turn when powered, accompanied by a humming sound, possibly due to worn-out carbon brushes or a short circuit in the motor coil. Fuel supply is also crucial; a clogged fuel filter or low fuel pressure can prevent the engine from getting fuel, which you can tell by the absence of ignition sounds from the engine. Ignition control issues, such as a faulty crankshaft position sensor, can affect the timing of the spark plugs. These components influence each other, so it's recommended to start with simple checks like the battery and wiring connections to avoid complex repairs. Regular maintenance can prevent 90% of failures.
Was this review help?
18
5
Share
Expand All
OKimberly
11/10/25 7:20am
If your car won't start, don't panic. First, check the battery indicator light. If it's flashing or not lit, it indicates low power or loose connections – I've solved this by cleaning the terminals. Fuel issues are common, like using the wrong fuel or a fuel pump failure; no sound from the fuel pump when turning the ignition is a telltale sign. Additionally, a triggered anti-theft system or weak key signal can prevent the engine from starting, requiring a system reboot. These checks are quick and safe. Avoid leaving your car in dangerous locations like highways – turn on hazard lights and seek professional help.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

Why Do Vehicles Need to Use Urea?

Vehicles need to use urea to reduce harmful nitrogen oxides in the exhaust into nitrogen and water. Here is some information about why vehicles use urea: 1. Reason Analysis: The exhaust directly emitted by the engine can no longer meet regulatory requirements, leading to the development of exhaust aftertreatment devices. The main harmful substances in diesel vehicle exhaust are nitrogen oxides and particulate matter, which can be reduced inside the engine through technical means. 2. Principle: The exhaust primarily contains nitrogen oxides. Urea is injected into the exhaust aftertreatment device, where it decomposes into ammonia at high temperatures. Under the action of a catalyst, the ammonia reacts with nitrogen oxides to produce harmless nitrogen and water. This device is called the SCR (Selective Catalytic Reduction) aftertreatment system.
7
5
Share

What do the symbols on the wiper switch represent and their meanings?

The symbols on the wiper switch and their meanings are as follows: Symbol MIST: The MIST position is for a single wipe. Symbol OFF: The OFF position turns off the vehicle's wiper action. Symbol INT: The INT position is for intermittent wiping, and the interval time can be adjusted. Symbol LO: The LO position is for low-speed continuous wiping. Symbol HI: The HI position is for high-speed continuous wiping. The backward arrow: Pulling the wiper lever backward activates the vehicle's washer fluid.
13
0
Share

What does successful car order verification mean?

Successful car order verification means that the sales order has been reviewed and the order has been successfully consumed. The definition of a sales order is as follows: A sales order is a sales agreement signed between a company and a customer. It facilitates communication between the company and the customer, representing the customer's request for the company's goods for sale, as well as the company's sales commitment to the customer. It is the first substantive function in the sales management system, connecting to the sales contract above and passing down to sales delivery. Through the maintenance and management of order information, companies can achieve planned control over sales, ensuring that sales activities, production activities, and procurement activities are orderly, smooth, and efficient.
19
2
Share

Which Type of Car Transmission is Better?

There is no absolute good or bad when it comes to car transmissions, as each type has its own advantages and disadvantages. The choice of transmission depends on actual driving needs. Here are some key points about transmissions: Function: A transmission is a gearbox that changes the transmission ratio and direction of motion. Located between the clutch and the central drive, its main functions are: changing the vehicle's driving force and speed (shifting) while keeping the engine speed and torque constant; enabling the vehicle to move in reverse (reversing); and allowing the engine to idle without stalling (neutral gear). Classification: Transmissions are divided into manual and automatic types. Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types.
17
2
Share

What does it mean for a car to be lowered?

Lowering a car refers to having an exceptionally low chassis with outward-angled ("cambered") wheels. The benefits of lowering a car include: Lower center of gravity: Enhances vehicle stability and indirectly improves ride comfort. Aesthetic appeal: Creates a visually striking appearance, resembling a small land rocket ready to launch. Trendy: Follows the current trend in car modification. Important note: Typically, the HellaFlush modification style is referred to as the "lowered with camber" style in China. However, it's crucial to note that according to Chinese laws, unauthorized vehicle modifications are illegal and will not pass annual inspections.
12
5
Share

Is Rallye Power Engine Oil a Big Brand?

Rallye Power engine oil is not a big brand manufacturer, but it belongs to the mid-to-high-end engine oil category, produced by Beijing Rallye Power Lubricant Co., Ltd. Here are some details about engine oil: Function: Engine oil, also known as engine lubricant (English name: Engine-oil), with a density of approximately 0.91×10³ (kg/m³), serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. It is often referred to as the 'blood' of a car. Composition: Engine oil consists of two main components: base oil and additives. The base oil is the primary component of lubricants, determining their fundamental properties, while additives compensate for and enhance any shortcomings in the base oil's performance, imparting new characteristics. Additives are a crucial part of lubricants.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.