···
Log in / Register

What are the reasons for the engine malfunction light in the Binyue coming on?

3 Answers
VanJulianna
07/28/25 11:14pm
The reasons for the engine malfunction light in the Binyue coming on are: 1. Sensor malfunction; 2. Maintenance issues; 3. Poor combustion of the air-fuel mixture; 4. Poor fuel quality; 5. Dirty air filter. The Binyue's body dimensions are: length 4330mm, width 1800mm, height 1609mm, with a wheelbase of 2600mm and a fuel tank capacity of 45 liters. The Binyue is equipped with a 1.4T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 104 kW and a maximum torque of 235 Nm. It features front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.
Was this review help?
12
1
Share
DiJack
08/12/25 2:33am
Last time I encountered a similar situation, I recommended checking these areas immediately: whether the engine oil level is sufficient, the quality of the oil, and whether the ignition coils and spark plugs are functioning properly. A yellow engine light is most likely caused by false alarms from abnormal oxygen sensors, intake pressure sensors, or crankshaft position sensors. If this happens right after refueling, it could be due to clogged catalytic converters caused by poor-quality gasoline. Newer car models are very sensitive; even slight carbon buildup on the mass airflow sensor can trigger an error. I've dealt with this many times myself and found that the throttle body on the Bin Yue model gets dirty particularly easily—cleaning it usually solves the problem. If all else fails, just buy an OBD scanner to connect to your phone and check the fault codes—it's much better than guessing blindly.
Was this review help?
2
4
Share
Expand All
LaGabriel
10/01/25 5:21am
As someone who often helps friends with car issues, I think the engine light shouldn't cause panic but must be taken seriously. About 80% of the time it's emission-related faults, like a stuck carbon canister purge valve or a loose fuel cap. The most ridiculous situation I've encountered was when an aftermarket air filter caused incorrect readings from the mass airflow sensor. My advice is to immediately pull over, turn off the engine, wait ten minutes, and restart - sometimes the computer's false alarm can clear itself. If the light comes on again, read the trouble codes as soon as possible. Don't be like my neighbor who kept driving for half a month, ending up spending over 4,000 yuan to replace the catalytic converter.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

How to Quickly Remove Frost from Car Windows?

Methods to quickly remove frost from car windows are as follows: 1. Use the built-in defroster: First, turn on the air conditioning button inside the car, switch the air circulation mode to external circulation, and wait a moment for the frost to disappear. However, this method has a drawback: using the air conditioning button in winter will inevitably increase fuel consumption, and switching to external circulation will cause the temperature inside the car to drop suddenly, making it unsuitable for long drives. 2. Open the windows: The fastest and most effective emergency method is to roll down the windows, allowing the wind inside and outside the car to circulate for a minute or two, and the frost will naturally disappear. This saves time and does not increase fuel consumption. 3. Turn on the heater: Simply turn on the heater inside the car and adjust the airflow direction to blow directly onto the windows. The heater can effectively dry the air inside the car, and once the air is dry, frost will not form on the windows. However, this method also has a drawback: when starting the car in winter, the water temperature inside the car has not yet reached the normal level, so the air blown out at this time is not warm.
12
0
Share

Is the Shadow Leopard a joint venture car?

Shadow Leopard is a domestic car. Here are the extended details: Body parameters: Taking the Shadow Leopard 2021 270T Shadow Leopard J10 Flyer Edition as an example, its body length, width, and height are 4700mm, 1850mm, and 1432mm respectively, with a wheelbase of 2736mm. Power aspects: It is equipped with a 1.5T turbocharged engine, matched with a 7-speed wet dual-clutch transmission, and the body structure is a 4-door 5-seater sedan. The maximum horsepower of the Shadow Leopard 2021 270T Shadow Leopard J10 Flyer Edition is 177ps, the maximum power is 130kw, the maximum torque is 270nm, the front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
18
0
Share

Reasons for White Smoke from Diesel Engines?

Here are the detailed explanations for the causes of white smoke from diesel engines: 1. Light white smoke, water in diesel fuel: Diesel fuel needs to settle for 24 hours before use. When refueling, avoid inserting the fuel pump to the bottom of the diesel barrel. Damaged or missing fuel tank caps should be promptly replaced. Poor sealing of the cylinder head gasket or cracks in the bottom of the cylinder head can cause coolant from the water jacket to leak into the cylinder, forming water vapor and resulting in white smoke. Locate the leakage point and repair or replace the relevant parts. 2. White smoke: When the temperature is too low, some diesel fuel may not ignite and burn, producing white smoke. This white smoke will disappear on its own as the engine temperature rises, which is a normal condition and does not require troubleshooting. Low injection pressure, severe dripping of the injector, or excessively low injector pressure adjustment can cause some diesel fuel mist to fail to ignite and burn in the combustion chamber, resulting in white smoke.
1
4
Share

The Difference Between Direct Injection and Multi-Point Fuel Injection

Here are the differences between direct injection and multi-point fuel injection: 1. Fuel Consumption: Direct injection has lower fuel consumption, while multi-point fuel injection has lower requirements for fuel quality. 2. Components: Both direct injection and multi-point fuel injection have complex structures and higher costs. 3. Operation: In a direct injection engine, high-pressure fuel is injected into the combustion chamber in a fine mist. As it evaporates, it absorbs heat, cooling the cylinder and thereby reducing emissions. Multi-point fuel injection involves injectors installed on the intake pipe of each cylinder, with fuel sprayed into the cylinder from multiple locations. 4. Technical Requirements: Direct injection technology has higher requirements, with the main technical challenge being the achievement of stratified combustion. While multi-point fuel injection improves upon the uneven mixture distribution issue of single-point injection, it does not enhance fuel atomization or air-fuel mixing.
9
0
Share

What is the lifespan of the dry dual-clutch in Jetour X70?

The lifespan of a dry dual-clutch is about ten years, and the clutch plates generally need to be replaced after approximately ten years of use. Strictly speaking, there is no precise, standard, or uniform answer to this question because the number of years a dry dual-clutch can last is influenced by too many objective factors. For example, daily driving conditions and driving habits can significantly impact the lifespan of a dry dual-clutch. Methods to extend the clutch's lifespan include using the clutch decisively. The clutch is primarily used for gear shifting and starting/stopping. When shifting gears, it should be done promptly and decisively without hesitation. Especially in low gears, releasing the clutch should be done quickly at first and then slowed down to avoid excessive impact on the clutch, which is detrimental to its lifespan. The function of the clutch is to gradually increase the driving force of the car, allowing for a smooth start; to temporarily separate the engine and transmission for gear shifting; to prevent overload in the transmission system; and to reduce torsional vibration impacts from the engine, thereby extending the lifespan of the transmission gears. Symptoms of a failing clutch include clutch slippage: when starting the car in a low gear, the car fails to start or has difficulty starting after releasing the clutch pedal; incomplete clutch disengagement: even when the clutch pedal is fully depressed, the power between the driving and driven plates of the clutch cannot be completely cut off, leading to difficulty in shifting gears, gear grinding, inability to stop, or clutch overheating; clutch shuddering; and abnormal clutch noises.
15
0
Share

What to Do If a Piece of Paint is Scratched Off the Car?

Solutions for a scratched-off piece of paint on the car: 1. You can choose to use wrapped sandpaper to smooth the scratched area until there is no uneven feeling compared to the surrounding paint when touched by hand; 2. Start spraying paint from a certain distance from the scratch, which can make the car's paint more even; 3. When spraying, pay attention to spraying back and forth, avoiding spraying heavily in one spot until the color covers the black area, ensuring the repaired paint color closely matches the car's original color. If it's just a minor scratch on the body, meaning only the surface layer is affected and not deep, this can actually be repaired by waxing.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.