What are the reasons for the delayed shutdown of the new Santana?

What are the hidden features of the GAC Aion S?

The following are the hidden features of the GAC Aion S: 1. ECO+ Mode: This mode is theoretically the most energy-efficient way of driving. Since this mode is not set for daily use, its activation is hidden in the vehicle settings of the driving computer, rather than in the driving mode options behind the gear lever. In this mode, the speed is limited to a lower range, while the I-pedal mode is automatically activated, and energy recovery reaches the highest level. In this mode, the battery's power is fully released, unlike in the normal mode where a certain amount of power is reserved to protect the battery. 2. CREEP Function in I-pedal Mode: In I-pedal mode, when the pedal is completely released, the motor's recovery capability reaches its maximum until the vehicle comes to a complete stop. In congested traffic, frequent pressing and releasing of the pedal can lead to fatigue. However, the Aion S adds a CREEP function in this mode, where the vehicle does not come to a complete stop even when the pedal is fully released, instead moving at a very low speed.

2

3

Share

What are the differences between the BJ40L and BJ40C?

bj40c is a single-row seat model, while bj40l is a double-row seat model, which is the fundamental difference between them. The following are the detailed differences between the two models: 1. Three-door and five-door: bj40c has three doors, while bj40l has five doors. 2. Performance: bj40c features superior ground clearance, approach angle, and departure angle, equipped with a 2.4L engine that delivers good low-end torque. Its 4L low-speed four-wheel-drive mode can handle almost all off-road conditions. It is also equipped with a series of safety systems such as Vehicle Stability Control, Brake Assist, and Hill Start Assist, significantly enhancing its safety performance in off-road conditions compared to the BG40L model. 3. Exterior: The exterior configurations of both models are largely consistent, both featuring off-road style equipment like engine decorative covers and removable hardtops to enhance the overall visual effect. BG40c adds a headlight delay-off function, improving the practicality of lighting after parking at night.

17

0

Share

What does the new four modernizations of sedans refer to?

Automotive new four modernizations refer to electrification, connectivity, intelligence, and sharing. Electrification pertains to the field of new energy power systems; intelligence refers to autonomous driving or driver assistance subsystems; connectivity involves the layout of the Internet of Vehicles; sharing denotes car sharing and mobility services. Among these four modernizations, electrification serves as the foundation, while connectivity acts as the link to achieve big data collection, gradually leading to intelligent mobility. This may become a feasible pathway for automobiles to achieve the ultimate goal of autonomous driving. As the wave of "new four modernizations" sweeps across the automotive industry, Chinese consumers have responded the fastest. This characteristic manifests in the consumer market, where China's auto market has become the most active "testing ground" today. Internet-connected cars, new energy vehicles, and continuously emerging new technologies and concepts stimulate the purchasing desires of young Chinese consumers and encourage automakers to boldly package vehicle models with new technologies and concepts for the market. With the penetration of "Internet+" in various fields, the new four modernizations will have a significant impact on future mobility, meaning that cars will no longer be just cars. Analyzing from both technological and value chain dimensions, the most disruptive future development trends in the automotive industry can be summarized as the "new four modernizations," where electrification is the foundation, connectivity is the condition, intelligence is the key, and sharing is the trend.

11

5

Share

Can You Drive on the Road with the Front License Plate Missing but the Rear One Still Intact?

You cannot drive on the road if the front license plate is missing. Article 95 of the Road Traffic Safety Law states: If a motor vehicle driven on the road does not display a motor vehicle license plate, does not carry an inspection compliance mark or an insurance mark, or does not have the vehicle registration certificate or driver's license on board, the traffic management department of the public security organ shall detain the motor vehicle, notify the party to provide the corresponding license plates, marks, or complete the necessary procedures, and may impose penalties in accordance with the provisions of Article 90 of this Law. If a motor vehicle driven on the road does not display a motor vehicle license plate, does not carry an inspection compliance mark or an insurance mark, or does not have the vehicle registration certificate or driver's license on board, the traffic management department of the public security organ shall detain the motor vehicle, notify the party to provide the corresponding license plates, marks, or complete the necessary procedures. Regulations on motor vehicle license plate display: When driving a motor vehicle on the road, the motor vehicle license plate must be displayed, along with the inspection compliance mark and insurance mark, and the vehicle registration certificate must be carried on board. The motor vehicle license plate must be displayed clearly and completely as required, and must not be intentionally obscured or damaged. No unit or individual may confiscate or detain a motor vehicle license plate. Procedure for replacing a license plate: Report the loss of the license plate at the local police station where the plate was lost to obtain a certificate of loss. Prepare the required materials, fill out the corresponding forms at the vehicle management office, and provide the original and copy of the vehicle owner's identity proof. If an agent is involved, the agent must also submit their original and copy of identity proof and a written authorization from the vehicle owner. The applicant should take the Motor Vehicle License Plate Application Form, identity proof, and other required documents to the service window at the vehicle management office for processing. The non-lost license plate will be retrieved, and the applicant will receive an acceptance receipt and pay the fee. The applicant can then collect a temporary license plate with the acceptance receipt and payment receipt, which should be prominently displayed on the front of the vehicle. After ten working days, the applicant can take the temporary license plate to the designated location to collect the new license plate and have it installed.

6

2

Share

What is the fuel consumption of the Breeze 1.5T?

The fuel consumption of the Breeze 1.5T is 5.3L/100km. Here are more details: 1. The power of the Breeze 1.5T. The Breeze 1.5T is equipped with a four-cylinder turbocharged engine, with a maximum power output of 193 horsepower and a peak torque of 243 Nm. The official 0-100 km/h acceleration time is 9.3 seconds, and the MIIT combined fuel consumption is 7.3L/100km. The vehicle is paired with either a six-speed manual or a CVT transmission. 2. Models and four-wheel drive system. The Breeze 1.5T offers two four-wheel-drive models in addition to the basic two-wheel-drive version. The top trim of the fuel-powered version also features four-wheel drive, while the hybrid models are all two-wheel drive. The Breeze's four-wheel-drive structure is equipped with an on-demand four-wheel-drive system. Its working principle involves generating differential torque through wet clutch plates. During normal driving, the main power comes from the front wheels. When the four-wheel-drive system detects front wheel slippage, the ETC electronic system engages the clutch to transfer power to the rear wheels.

11

5

Share

What are the effects of car polishing?

After three or four years of use, a car's paint inevitably becomes dull. Polishing can quickly restore the paint to a like-new condition. Polishing can remove scratches on the car's clear coat, but it cannot fix scratches that reach the color coat, such as hairline scratches or those caused by daily washing and use. Daily car maintenance and precautions: Brake fluid: Also known as hydraulic brake fluid, it is an essential component for braking, primarily used for energy transmission, heat dissipation, rust and corrosion prevention, and lubrication. Under normal usage, it is recommended to replace it every 2 years or 40,000 kilometers. For most vehicles, DOT4-grade brake fluid is sufficient. Coolant: Also known as antifreeze coolant, its main functions are antifreeze and cooling. Vehicles are equipped with long-life coolant upon manufacture, which can last up to 10 years or 100,000 kilometers. Generally, it requires little maintenance unless sediment or flocculent substances appear in the coolant. Car tire maintenance: Underinflation or overinflation can cause abnormal tire wear, shorten tire lifespan, increase fuel consumption, and even raise the risk of a blowout. It is recommended to check tire pressure once a month to ensure it is at the correct level. Monitor tread wear and consider rotating the tires as needed.

11

2

Share

What are the reasons for the delayed shutdown of the new Santana?

What are the hidden features of the GAC Aion S?

What are the differences between the BJ40L and BJ40C?

What does the new four modernizations of sedans refer to?

Can You Drive on the Road with the Front License Plate Missing but the Rear One Still Intact?

What is the fuel consumption of the Breeze 1.5T?

What are the effects of car polishing?

What tires are suitable for the Changan CS75?

What to Do If You Keep Mistaking the Gas Pedal for the Brake?

What are the differences between sedan and SUV models?

What does the ECO button in a car mean?