What are the reasons for the decline in car air conditioning cooling?

How to Check if a Turbocharger is Working Properly?

There are several methods to check if a turbocharger is working properly: 1. The car feels less powerful when accelerating. 2. Incomplete engine combustion, resulting in strong exhaust odors. 3. The engine coolant temperature rises. 4. Slower RPM increase than before, accompanied by strange noises. Common causes of turbocharger failure include: 1. Poor sealing of the turbocharger impeller shaft: Blue smoke from the exhaust at idle. 2. Severe clogging of the exhaust gas recirculation pipe: Blue smoke from the exhaust at idle and while driving, worsening when accelerating, with high oil consumption. 3. Worn or aged piston rings, cylinder walls, or valve seals: A 'fluttering' noise when accelerating or decelerating.

19

5

Share

How to Use Turn Signals in Subject 2 Driving Test?

There are 6 instances where turn signals are required in Subject 2: 1. When starting the vehicle, turn on the left turn signal; 2. When starting on a slope, turn on the left turn signal; 3. During parallel parking, turn on the right turn signal when pulling over to the side, stopping 30 cm from the curb before reversing; 4. Before shifting into reverse gear during parallel parking, turn on the left turn signal because the steering wheel will be turned fully to the right, causing the front of the car to move left; 5. Before exiting the parking space during parallel parking, shift into drive and turn on the left turn signal, turning it off promptly after exiting; 6. When entering a right-angle turn, turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect turn signal usage are as follows: - Failing to use or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. - Turning the steering wheel within 3 seconds of activating the turn signal before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. The full score for Subject 2 is 100 points, with evaluation criteria for failing, deducting 20 points, 10 points, or 5 points. The test is passed under the following conditions: ① For large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles (C1, C2) include reversing into a parking space, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and S-curve driving (some regions also include a sixth item: highway toll card collection). The test items for large vehicles (A1, A2, A3, B1, B2) include pole parking, slope parking and starting, parallel parking, single-plank bridge crossing, S-curve driving, right-angle turns, narrow gate passing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, and simulations for highways, continuous sharp mountain turns, tunnels, rain/fog conditions, slippery roads, and emergency handling.

19

5

Share

What are the consequences of not renewing an expired vehicle license?

The consequences of not renewing an expired vehicle license are: 1. An expired vehicle license means the license has exceeded the specified validity period, which is equivalent to driving without a license. If discovered, certain penalties will be imposed; 2. If the vehicle license has not undergone the required annual inspection on time and the vehicle is driven on the road, the driver will bear primary responsibility for any resulting traffic accidents. For vehicles involved in major traffic accidents that have purchased insurance, the insurance company has the right to refuse compensation. Vehicle licenses must be renewed within 90 days before the expiration date. Non-exempt vehicle owners need to bring a power of attorney, the vehicle license, and the compulsory traffic insurance policy to the designated vehicle inspection station for inspection. Upon passing the inspection, the inspection compliance mark can be directly obtained at the station.

1

Share

Which Letter Represents Neutral in an Automatic Transmission Car?

Automatic transmission cars use the letter N to indicate neutral. Below is an introduction to the gears of an automatic transmission car and precautions for their use: 1. P gear: Parking gear. When the vehicle is completely stationary, press the unlock button at the front of the gear lever to shift into P gear. 2. R gear: Reverse gear. When the vehicle is completely stationary, press the brake pedal, press the unlock button at the front of the gear lever to shift into R gear, and after releasing the brake pedal, slowly press the accelerator to move the vehicle backward. 3. N gear: Neutral gear. The gear lever can be directly shifted from R or D gear into N gear. When shifting the gear lever out of N gear, the brake pedal must be pressed. 4. D gear: Drive gear. The gear lever can be directly shifted from N gear into D gear. This gear is generally used when the vehicle is moving forward, and the system will automatically shift gears based on engine load and vehicle speed. 5. S gear: Sport gear. When used, the transmission will shift into a lower gear based on changes in resistance, and the engine will operate at a higher speed.

11

5

Share

What causes the EA888 engine to report a rich condition in cylinder 1 system?

The reasons for the EA888 engine reporting a rich condition in cylinder 1 system are: 1. Increased carbon deposits in the combustion chamber reduce the combustion chamber volume, increasing the compression ratio, resulting in higher cylinder pressure; 2. Overly rich air-fuel mixture in the combustion chamber or excessively low engine temperature; 3. Poor exhaust flow or a clogged catalytic converter can also lead to high cylinder pressure. The automobile engine is the power-generating device of a vehicle, serving as its heart, and determines the vehicle's power performance, fuel economy, stability, and environmental friendliness. Depending on the power source, automobile engines can be classified into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems, among others.

10

1

Share

Is a Car Battery 12V or 24V?

Car batteries are typically 12V; multi-cylinder diesel engines and single-cylinder diesel engines above 25 horsepower usually use 24V battery voltage. The differences between 12V and 24V batteries are as follows: Starting Performance and Versatility Differences: 12V batteries offer better versatility but poorer starting performance. 24V batteries perform well in both versatility and starting capabilities. Application in Vehicle Models Differs: 12V batteries are easier to identify. Light trucks equipped with a single battery usually have a 12V voltage, commonly used in entry-level light trucks and most mini trucks and small trucks. Some light trucks with hydraulic brakes also use 12V batteries. 24V is currently the mainstream battery voltage choice for light trucks. Cost Differences: The obvious advantage of 12V batteries is their lower cost, including purchase and maintenance/replacement costs. 24V batteries are correspondingly more expensive due to the use of two batteries. Different Adaptability: 12V batteries are more adaptable to electronic products, as electronic components used in passenger vehicles can be directly applied.

15

4

Share

What are the reasons for the decline in car air conditioning cooling?

How to Check if a Turbocharger is Working Properly?

How to Use Turn Signals in Subject 2 Driving Test?

What are the consequences of not renewing an expired vehicle license?

Which Letter Represents Neutral in an Automatic Transmission Car?

What causes the EA888 engine to report a rich condition in cylinder 1 system?

Is a Car Battery 12V or 24V?

How to Obtain a Temporary License Plate for a New Car?

Can I use my old license plate when buying a used car?

What does an arrow pointing to a dashboard mean?

What is the Correct Installation Position for a Dash Cam?