What are the reasons for the dashboard of Chery Fengyun 2 not lighting up?
4 Answers
Chery Fengyun 2 dashboard not lighting up reasons are as follows: Dashboard light damage: If the dashboard lights are damaged, they need to be replaced promptly; Power supply circuit failure: If the dashboard power supply circuit is damaged, resulting in an open circuit or short circuit, it can also cause the car dashboard not to light up; Fuse damage: If the dashboard power supply fuse is blown, it will naturally result in no power supply, and the dashboard will not light up. Battery issues: For example, if the battery has reached the end of its lifespan, or if the battery terminals are loose, making poor contact, or the terminals might be oxidized. Dashboard CPU damage: If all the indicator lights on the dashboard are not lighting up and the car shuts off immediately after starting, it is highly likely that there is an issue with the dashboard, with a common cause being damage to the dashboard CPU.
My old Chery Fulwin 2 once had an issue with the dashboard not lighting up. I suspect the most common cause is a blown fuse. Check the fuse box and inspect the corresponding dashboard fuse. If the fuse is fine, it might be a burnt-out backlight bulb, as bulbs tend to fail after prolonged use. Additionally, aged or loose wiring can cause poor contact, especially in older vehicles. I remember having wiring issues just a few years after buying the car, and it turned out to be a loose connector during repairs. Faults in the control unit or power supply issues, like an unstable battery, can also cause the dashboard to go dark. Address the problem immediately once detected—driving without knowing your speed or fuel level is dangerous. I recommend taking it to a professional shop right away for a detailed inspection of the fuses and circuitry. Don’t delay.
I think the dashboard not lighting up might be related to a fuse or bulb failure, which significantly impacts my driving safety. Not being able to see the speedometer can easily lead to accident risks. For older Chery Fengyun 2 cars, poor wiring contact is a common issue. I believe it's necessary to go to a repair shop as soon as possible to check the wiring and control module. They can use a multimeter to measure voltage and identify the cause. During regular maintenance, pay attention to cleaning the battery terminals to maintain stability, which can reduce the occurrence of such faults. In case this happens on the highway, pull over and turn on the hazard lights to protect yourself. Don't try to save money by tinkering with it yourself; professional diagnosis is more reliable and safer, to prevent small issues from becoming big problems.
If the dashboard lights are not working, the most likely causes are a blown fuse or a burnt-out bulb. To save some money, you can try fixing it yourself. First, check the fuse box and replace the corresponding fuse if necessary. Bulbs are also inexpensive, so you can buy a new one and try replacing it. If it's just a loose wire, simply reinsert the plug tightly. The Chery Fengyun 2 is designed to be simple and easy to work on. However, if the control unit is faulty, you'll need to spend money on repairs. Don't delay in addressing the issue—regular maintenance and checking the dashboard lights can prevent such problems. I usually follow this approach, which saves both money and hassle in the long run.
