What are the reasons for the dashboard of Changan Oushang not lighting up?

1 Answers
KiaraLynn
07/29/25 11:18am
The reasons for the dashboard of Changan Oushang not lighting up are: 1. The dashboard lights are broken; 2. There is a short circuit in the power supply line of the dashboard. Taking the 2021 Changan Oushang X7 as an example, it belongs to the compact SUV category, with body dimensions of: length 4705mm, width 1860mm, height 1720mm, wheelbase of 2780mm, and a curb weight of 1520kg. The 2021 Changan Oushang X7 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 178PS, maximum power of 131kW, maximum torque of 265Nm, and is paired with a 6-speed manual transmission.
Was this review help?
10
5
Share
More Forum Discussions

Why is one side of the BMW X5 daytime running light not working?

BMW X5 daytime running light has one side not working for the following reasons: Circuit fault: One side of the BMW X5 daytime running light may not be working due to a short circuit in the wiring on that side, such as: aging wires, poor contact at the connector, etc., which can cause this situation. Daytime running light bulb failure: Damage to the daytime running light bulb can also cause this situation. In this case, you can go to a 4S shop for repair or bulb replacement. Function of daytime running lights: Daytime running lights on cars serve both a decorative and a warning function. They significantly improve the visibility of the vehicle to other road users. The benefit is that vehicles equipped with daytime running lights allow road users, including pedestrians, cyclists, and other motorists, to detect and recognize the vehicle earlier and better.
15
2
Share

What type of oil does the Changan Alsvin V7 use?

The Changan Alsvin V7 uses semi-synthetic or higher grade 5W-30 oil. This type of oil offers good fluidity and lubricity, providing excellent protection for the engine. 5W-30 refers to the SAE standard viscosity rating. This viscosity rating first indicates that the oil is a multi-grade oil. The 'W' stands for WINTER, and the number before the 'W' represents the oil's flow performance at low temperatures—the smaller the number, the better the starting performance in cold conditions. The number after the 'W' indicates the oil's stability at high temperatures (i.e., its resistance to thinning). A higher number means better high-temperature stability. The Changan Alsvin V7 is a new compact sedan from Changan. The car's dimensions are 4530mm in length, 1745mm in width, and 1498mm in height, with a wheelbase of 2610mm.
5
2
Share

Does the new Geely Binyue need a break-in period?

Geely Binyue new cars require a break-in period, which is typically 3,000 kilometers. The duration of the break-in period may vary depending on the frequency of car usage. Below are some precautions regarding the car break-in period: First Maintenance: When the car reaches 5,000 kilometers, the first maintenance should be performed. After the first maintenance, the car will reach its most balanced state. Avoid High-Speed Driving: During the break-in period, avoid driving at high RPMs, as this increases the engine's load. Not only does it raise fuel consumption, but it can also damage the engine and reduce its lifespan. Use High-Quality Fuel: During the break-in period, try to use high-quality fuel to keep the engine in good working condition. This not only speeds up engine lubrication but also extends the engine's lifespan.
3
0
Share

Why are the positions of 30 and 50 marked in red on Volkswagen speedometers?

Volkswagen marks the positions of 30 and 50 in red to constantly remind drivers to pay attention to speed limits and avoid unknowingly entering speed-restricted zones. The significance of marking 30 and 50 in red: Volkswagen originates from Germany. In most EU countries, such as urban roads in Germany, the speed limits are generally 50 or 30 km/h. Therefore, these two numbers hold significant importance for German traffic. When driving in a 30 km/h zone, drivers must fully consider pedestrians. If an accident occurs in this situation, the driver bears full responsibility. At intersections without traffic lights or yield signs, the "right before left" rule applies, meaning vehicles coming from the right have absolute right of way. In case of a collision under these circumstances, the vehicle on the left bears full responsibility. When the speed limit is 50 km/h, drivers generally have priority. Characteristics of German cars: German cars have a distinctive feature where the speedometer scale below 60 km/h is very finely divided. For example, on a 0-260 km/h speedometer, the scale increments are 5 km/h at lower speeds and 10 km/h at higher speeds. The 0-60 km/h range occupies about 40% of the speedometer.
11
5
Share

What does TPMS fault mean?

TPMS fault refers to a Tire Pressure Monitoring System malfunction. When this warning light illuminates, it alerts the driver to abnormal tire pressure, which may be caused by low pressure in one of the tires. The tire pressure should be checked as soon as possible. If the TPMS warning light comes on while driving, immediately reduce speed and avoid sharp steering or sudden braking. Then, check the tire pressure, inflate all four tires to the proper level, and press the tire pressure reset button to clear the warning. Tires are circular elastic rubber products mounted on metal rims that support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance.
13
5
Share

How to Fix Squeaky Wiper Blades?

The solutions for squeaky wiper blades are: 1. Check if there is any foreign object between the wiper blade and the windshield, and remove it if found; 2. Inspect the rubber part of the wiper blade for hardening, burrs, notches, cracks, or tears. If any of these issues are present, replace the wiper blade. If there are only burrs, you can lightly sand them twice with 1000-grit sandpaper and test again; 3. If the wiper blade is not the cause, perform a water spray test on the windshield. If you notice areas where water does not bead up or spreads quickly, it indicates the presence of an oily film on the windshield. In this case, use a degreaser or adhesive remover to clean the windshield; 4. If the noise is caused by uneven force during the wiper's back-and-forth motion, remove the wiper blade and place a piece of cardboard on the windshield. Gently place the wiper arm on the cardboard and check if the lower plane of the wiper arm makes full contact. If there is an angle, it means the wiper arm is bent. You can use a wrench to adjust the angle of the wiper arm. Wrap the wiper arm with a thick towel during adjustment to prevent the wrench from damaging the paint on the wiper arm.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.