What are the reasons for the dashboard lights not working?

1 Answers
ChristianMarie
07/30/25 8:50am
The reasons for the dashboard lights not working are: 1. The dashboard illumination bulb is damaged; 2. There is an open circuit or short circuit in the power supply line of the dashboard; 3. The dashboard power supply fuse is blown. The car dashboard is a device that reflects the working conditions of various vehicle systems. Common gauges include the speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge. The steps to clean the car dashboard are: 1. Use a soft fiber cloth to wipe off surface dirt and dust; 2. Clean the gaps with a toothpick or cotton swab wrapped with a cloth or paper towel; 3. Soak a soft cloth in tap water to remove stubborn stains.
Was this review help?
15
5
Share
More Forum Discussions

Which Light is the Overtaking Light?

The overtaking light is the one that activates the high beam when pressed and automatically turns off when released. Signal Lights: Includes turn signals (hazard lights) and brake lights. Proper use of signal lights is crucial for safe driving. Turn Signals: Activated when the vehicle is turning, they flash intermittently to alert vehicles and pedestrians around. Brake Lights: These are highly bright and used to inform the following vehicle that the front vehicle is slowing down or stopping. Improper use of these lights can easily lead to rear-end collisions. Night Running Lights and Width Lights: Running lights, commonly known as headlights, should be used appropriately by switching to low beam during oncoming traffic and back to high beam afterward to extend visibility and compensate for the reduced visibility during oncoming traffic. Changing between high and low beams should be used to alert when passing intersections or overtaking. Width lights, commonly known as parking lights, are used to display the width and length of the vehicle at night.
1
5
Share

Is Tire Pressure Monitoring Important?

Tire pressure monitoring is important, and its functions are: to provide timely alerts for high tire pressure, low tire pressure, and high temperature, avoiding traffic accidents caused by tire failures and ensuring driving safety. There are three types of tire pressure monitoring: 1. Indirect tire pressure monitoring, which works by monitoring the number of rotations of the left and right wheels and requires driving more than 5 kilometers to display the rotation count; 2. Composite tire pressure monitoring, which can directly indicate which tire has a problem; 3. Direct tire pressure monitoring, which involves installing four tire pressure monitoring sensors inside the tires to automatically monitor tire pressure and temperature in real time, whether the vehicle is stationary or in motion.
20
1
Share

Can a car that uses 92-octane gasoline be filled with 95-octane fuel?

92-octane cars should not be filled with 95-octane fuel. Long-term use may affect the lifespan of the vehicle's ignition system, fuel injectors, and spark plugs, reduce fuel quality, and accelerate the need for major repairs. The recommended fuel grade is usually indicated on the inside of the fuel tank cap and in the vehicle's maintenance manual. Car owners should use the fuel grade suitable for their vehicle. Whether it's 92 or 95 octane, the number represents the gasoline's anti-knock properties, not its quality. A higher octane number indicates better anti-knock performance, but it does not mean the fuel is of better quality, contrary to what some car owners might think.
7
0
Share

Which manufacturer produces the Voyah Dreamer?

Voyah Dreamer is produced by Voyah Auto, a subsidiary of Dongfeng Motor Corporation Limited. Below are the exterior and powertrain details of the Voyah Dreamer: Exterior introduction of the Voyah Dreamer: The Voyah Dreamer has a body length, width, and height of 5315*1980*1810mm, with a wheelbase of 3200mm. It features an oversized closed vertical waterfall front grille, with internal lines arranged in pairs—one thick and one thin—symmetrically distributed on both sides. The fog light areas on both sides include appropriate chrome decorations and two oversized air intake grille ornaments. Additionally, all four chrome wheels are 20 inches in size, designed with a turbine-like multi-spoke pattern. Powertrain introduction of the Voyah Dreamer: In terms of powertrain, the new vehicle will continue to offer two variants: a pure electric version and an extended-range hybrid version. The electric all-wheel-drive variant accelerates from 0 to 100 km/h in just 5.9 seconds. The chassis design of the Voyah Dreamer includes a front double-wishbone and rear multi-link suspension structure. Moreover, the high-end models will be equipped with air suspension and CDC electromagnetic damping system.
8
1
Share

Is Euro 3 Equivalent to China 4 or China 3?

Euro 3 is equivalent to China 3 emission standards. Euro 3 is an automotive exhaust emission standard established by the European Union, primarily applicable to light gasoline and diesel vehicles weighing up to 3.5 tons. Euro 3 mandates that commercial vehicles limit their exhaust emissions of hydrocarbons, carbon monoxide, nitrogen oxides, and particulates to 0.66%, 2.1%, 5%, and 0.1%, respectively. European emission standards include: Euro 1, Euro 2, Euro 3, Euro 4, Euro 5, and Euro 6. Automotive emission standards refer to the regulations limiting harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulates, and soot emitted from vehicle exhaust. According to the 'Announcement on the Release of New Motor Vehicle Models and Engine Types Meeting the Second and Third Stages of National Motor Vehicle Emission Standards,' China 3 standards mainly apply to light gasoline and diesel vehicles weighing 3.5 tons, equivalent to Euro III standards. The nationwide implementation date was July 1, 2007. The China 3 standard represents a significant improvement, particularly emphasizing emission standards for vehicles at -7 degrees Celsius, which is unique and not found abroad. Another feature is the zero-start standard for vehicles, including OBD (On-Board Diagnostics). If any emission-related issues arise during vehicle operation, the system will automatically alert the owner, who should then visit a service station for repairs to resolve the issue.
16
5
Share

What to Do If Failing the Monocular Vision Test During 6-Year Driver's License Renewal?

If you fail the monocular vision test during the 6-year license renewal physical examination, you can visit a hospital or optician for a check-up to determine whether you have myopia, hyperopia, or astigmatism. Subsequently, you can wear glasses with the appropriate prescription to restore your vision and then retake the physical examination. The driver's license physical examination does not require drivers to pass with naked-eye vision, so if your vision has declined, wearing corrective glasses is sufficient. Time Regulations: If the license is expired for less than one year, you can renew it normally; if expired for more than one year but less than three years, the license will be canceled, but you can renew it by passing the subject one exam; if expired for more than three years, the license becomes invalid and cannot be renewed. Renewal Deadline: The motor vehicle driver should apply for renewal at the vehicle management office of the original license issuance within 90 days before the expiration of the motor vehicle driver's license. When applying, the "Motor Vehicle Driver's License Application Form" should be filled out. Renewal Materials: Bring two copies of ID card, two 1-inch color passport photos, original ID card, original driver's license, and a physical examination certificate from a county-level or above hospital (free physical examination is also available at the vehicle management office).
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.