What Are the Reasons for the Corolla Fan Blower Not Working?

1 Answers
VonJessica
07/30/25 12:57am
Reasons for the Corolla fan blower not working include the coolant temperature not reaching the required level, relay failure, or issues with the temperature control switch. Coolant Temperature Not Reaching the Required Level: Most modern car radiator fans operate based on electronic temperature control, meaning the fan will only start working when the coolant reaches the specified temperature. If the temperature is too low, the radiator fan will not rotate. Therefore, if the car radiator fan fails to operate, the first step is to check whether the coolant temperature meets the required level. If the temperature remains too low, the engine should be inspected. Relay Failure: If the coolant temperature is adequate but the car radiator fan still does not work, the issue may lie with the fan relay. In this case, the relay should be removed for inspection and repaired or replaced if necessary. Temperature Control Switch Issues: If neither of the above issues is present, the temperature control switch should be checked, as a faulty switch can also affect the operation of the car radiator fan. The solution is to replace the temperature control switch.
Was this review help?
9
1
Share
More Forum Discussions

How to Relieve Physical Fatigue While Driving

Adjust your visual focus When driving for long periods, avoid staring continuously at the center line of the road. Shift your visual focus and, when safe, quickly glance in other directions. Always maintain a safe distance from the vehicle ahead when driving at high speeds. Lemon to activate the mind and body Keep a lemon within easy reach. When fatigued, lightly scratch its peel and take a deep breath to inhale its refreshing aroma, which helps to invigorate the mind. If you prepare a few lemon slices, taking a sip of their tangy flavor will surely give you a quick energy boost. Get your body moving If driving long distances, make sure to take regular breaks. After stopping, get out of the car and move your body. If it's inconvenient to exit the vehicle, take the opportunity to stretch your neck and shake your shoulders while seated. Performing small movements in the car can help rejuvenate your energy. Use sound to wake yourself up Turn on the radio and listen to music—preferably something uplifting rather than overly soothing. Alternatively, you can listen to jokes, crosstalk, or comedy sketches, which don’t require too much focus and can help keep you alert while driving.
20
4
Share

What car has the R logo?

Car logos with an R include Rolls-Royce and Riich. Here are the relevant introductions: 1. Rolls-Royce Double R: The Rolls-Royce Double R logo is the abbreviation of the two founders, Charles Stewart Rolls and Henry Royce. 2. Riich R: Riich is the parent brand of the MPV series under Chery Automobile Company. Its logo consists of a pair of spread wings and the first letter "R" of the English name Riich. 3. Rolls-Royce: In addition to manufacturing cars, Rolls-Royce is also involved in the aviation engine manufacturing industry and is an excellent engine manufacturer. Some Airbus aircraft models use Rolls-Royce engines, such as the famous Boeing airliners. Ultra-luxury cars like Rolls-Royce have few competitors in the automotive market, as there are very few cars in the same class. 4. Riich: Riich targets the high-end automotive market with a product layout similar to Mini and BMW 5 Series, Yaris and Camry, Fit and Accord, forming interdependent G and M series. This greatly enriches the strength of the Riich brand while also enhancing its competitiveness in the high-end automotive market.
7
0
Share

What is the battery model for the 2013 Mondeo?

The original battery for the Mondeo is VARTA, with the model specification T6 12V/60AH 105RC 590CCA. The battery dimensions are 27.6 cm in length, 17.5 cm in width, and 17.5 cm in height. The designed lifespan of the battery is 27 months. Generally, family vehicles are more economical, and new car batteries often last 3-4 years. However, after the first replacement, it is usually necessary to replace the battery every 2 years or so. The steps to test the condition of the battery are as follows: 1. Inspect the battery's exterior: Check if the battery casing is bulging, leaking, cracked, or if the terminals are corroded. If any of these signs are present, it indicates that the battery is dead and needs replacement. 2. Measure the battery voltage: After charging for two hours, check the voltage of each cell every 20 minutes. If it is below 13V, the battery has issues. During discharge, perform three checks every 10 minutes. If the discharge time is faster than other batteries and the voltage drops below 10V, the battery is faulty. 3. Check for "dehydration" and blackening: After charging the battery for 3-6 hours, if the charger's red light remains on, it indicates severe "dehydration." Open the battery's top cover to reveal six round holes. If the electrolyte inside appears black, it means the lead powder from the plates has fallen off, indicating a dead cell.
4
2
Share

Should You Press the Clutch or Brake First for Hill Start Parking?

For hill start parking, both the clutch and brake need to be pressed simultaneously. The specific steps for hill start parking are as follows: 1. When climbing the hill, maintain a half-clutch state, then stabilize the clutch and steering (ensuring the right wheel does not cross the far right of the yellow line). Upon reaching the stopping point, press the clutch and brake simultaneously (the interval between pressing the clutch and brake should not exceed 2 seconds). 2. During hill start parking, it is not advisable to maintain a half-clutch state while pressing the brake. If the half-clutch state is not well controlled, pressing the brake may cause the engine to stall. This is because beginners tend to unintentionally release the clutch with their left foot when pressing the brake hard with their right foot. Therefore, it is better to press both pedals together and apply force simultaneously. 3. If the brake is pressed abruptly during hill start parking, the engine may stall due to idle speed imbalance and ineffective clutch separation. As the vehicle speed drops to zero with the braking action, the engine may "choke." Hence, it is recommended to press the clutch first and then the brake. With practice, both pedals can be pressed simultaneously.
2
2
Share

How to Repair an Automotive Alternator?

Automotive alternator repair can begin with an external inspection, as some mechanical faults can be visually identified, such as bearing wear or rotor deformation. After ruling out external factors, specialized instruments like multimeters, oscilloscopes, and decoders can be used to diagnose and eliminate common alternator faults, such as brush wear, stator insulation sleeve detachment causing short circuits, or rectifier diode short-circuit burnouts. For daily maintenance of automotive alternators, the focus is primarily on cleaning and inspection, as outlined below: 1. Cleaning: The heat generated during alternator operation is dissipated by airflow from the fan behind the pulley, which enters the casing for cooling. Removing accumulated dirt and dust from the alternator's exterior ensures ventilation pathways remain clear, facilitating heat dissipation. 2. Checking and adjusting belt tension: The alternator is driven by the engine via a belt, and the belt tension should be adjusted appropriately. If too loose, the belt may slip, leading to insufficient power generation; if too tight, it may cause belt damage or excessive wear on the alternator bearings. To check belt tension: In a static state, apply 50N of force at the midpoint of the belt. If it deflects by 10~12mm, the tension is correct. 3. Inspecting wiring: Ensure the connections between the alternator and regulator are secure and in good contact. Any rust should be promptly cleaned with sandpaper, and oxidized wires should also be cleaned thoroughly.
16
4
Share

How to Turn Off the Radio in an Audi A6L?

Audi A6L radio shutdown method: 1. First, press the vehicle's one-touch start button to power on the vehicle; otherwise, the radio cannot be turned on. 2. Then, locate the switch for the central control LCD screen near the center console armrest. 3. Press the switch to activate the central control LCD display. 4. Next, tap the radio button on the central control LCD screen to turn on the radio. 5. Click the second button on the left column to adjust and turn off the car radio. Below is some relevant information about the Audi A6L: 1. Exterior design: It adopts a more dynamic design with straight, sharp, and angular lines. It comes standard with matrix-type LED headlights, featuring an innovative matrix structure that can intelligently detect road conditions and, with the assistance of cameras and control software, flexibly illuminate the road ahead. 2. Interior design: It features a new layout with a 10.1-inch upper central control screen equipped with Audi's next-generation MMI touch response operating system and an 8.6-inch lower touch display. The physical buttons in the central control area for operating the car system and air conditioning have been eliminated. The 12.3-inch instrument panel offers two display modes and supports map projection, delivering a highly technological feel.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.