What are the reasons for the cigarette lighter in the Buick Excelle not working?

1 Answers
MichaelMarie
07/29/25 7:48pm
The main reasons why the cigarette lighter in the Buick Excelle may not be working are as follows: 1. Long-term use of the cigarette lighter: It may be due to the owner's prolonged use of the cigarette lighter, with repeated insertion and removal actions causing the retaining spring to loosen, which in turn leads to the cigarette lighter not working. 2. Blown fuse: Improper use and repeated plugging and unplugging can cause a short circuit in the wiring, resulting in the fuse being blown and the cigarette lighter not working. 3. No power to the cigarette lighter: If other electrical devices in the car are functioning normally but the cigarette lighter is not working, it may be due to the cigarette lighter having no power. Additional information: Precautions: External devices should be unplugged when starting the car and when turning off the engine. Wiggling during plugging and unplugging, as well as frequent collisions with the cigarette lighter plug while operating the car, can cause looseness.
Was this review help?
9
2
Share
More Forum Discussions

What are the consequences of revving the engine in neutral?

Revving the engine in neutral can subject the moving parts of the engine to significant inertial forces, affecting its reliability and lifespan. When the car is in neutral, the engine does not output power. In this state, revving the throttle causes the engine speed to rise sharply, forcing moving parts such as pistons and connecting rods into rapid acceleration, which generates substantial acceleration and subjects them to high alternating loads. The forces on the pistons, piston pins, connecting rods, connecting rod bolts, and crankshaft will exceed those under normal operating conditions. Additionally, the sharp increase in engine speed during revving can lead to inadequate lubrication at friction points, increasing the risk of cylinder scoring or bearing seizure. Prolonged revving in neutral can also result in severe incomplete combustion. If unburned fuel-air mixture ignites outside the cylinders, it may cause the vehicle to catch fire. Incomplete combustion also promotes carbon buildup, which can clog the catalytic converter, leading to abnormal high temperatures. These elevated temperatures may cause wiring to ignite, with potentially serious consequences.
1
4
Share

What is the fuel consumption of the Beidou Star?

The Beidou Star has 4 models, including the 2019-1.4L-Manual Deluxe Edition, Classic Edition, and their facelifts, all equipped with a 97-horsepower engine. The NEDC fuel consumption is 5.1L per 100km, which is the official data. The fuel tank capacity of the Beidou Star is 42L. With a full tank, it can travel a distance of 42/5.1*100=823km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, will increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during cold starts, the injected gasoline is less likely to atomize, requiring more gasoline to burn, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer controls the engine to run at higher RPMs to warm up, which also increases fuel consumption. Excessive oil consumption: When excessive oil consumption is noticed, first check for oil leaks at the connections between the engine body and gear chamber cover, the large plate on the driving wheel side, rear cover, and cover housing. If there is a leak, observe whether the sealing gaskets at each connection are intact and replace any damaged ones. If the sealing gaskets are intact, check if the connecting screws at each part are loose. Oil loss: Long-term use of the engine can cause normal wear, or improper maintenance can lead to abnormal wear, both of which can create longitudinal scratches on the diesel engine's cylinder liner. If the cylinder diameter and piston side clearance exceed the specified values, the piston ring's tension decreases accordingly, leading to incomplete oil scraping. Alternatively, if the inner tension spring of the oil ring breaks at the oil ring's opening, incomplete oil scraping can cause the oil to participate in combustion, resulting in severe oil consumption symptoms. This manifests as difficulty starting the diesel engine, obvious blue smoke from the exhaust pipe, and severe oil spraying from the breather.
6
1
Share

Is There a Break-in Period for New Cars?

New cars do have a break-in period, which typically ranges from 1,000 to 1,500 kilometers. The break-in period refers to the initial driving phase of a new car or one that has undergone major repairs. This stage is essential for ensuring that all components fully engage, friction is properly established, and the parts adapt and settle into their optimal positions. During the break-in period, it is advisable to minimize the vehicle's load. The heavier the load, the greater the driving resistance, which in turn increases the demand on the engine's driving force and places a higher load on the engine. It is also important to warm up the car during the break-in period, and this practice should continue even after the break-in period is over. Warming up the car requires some technique; generally, idling to warm up is not recommended. After a normal start, avoid pressing the accelerator pedal aggressively and maintain low engine RPMs. Typically, the warming-up process can be completed within three minutes.
17
0
Share

How to Use the Accord Turn Signals?

How to use the Accord turn signals: 1. First ensure the vehicle is in ignition state; 2. Left turn signal is activated by pushing the control lever downward; 3. Right turn signal is activated by lifting the control lever upward. Turn signals are crucial indicator lights that activate when a motor vehicle turns to alert surrounding vehicles and pedestrians. The lamps use xenon tubes with microcontroller-controlled circuits, featuring alternating left-right flashing for continuous operation. In terms of powertrain, the Accord's CVT transmission employs high-strength drive belts to achieve wide gear ratios for efficient power delivery. The vehicle also utilizes iVTEC and Intelligent Power Management System, which can automatically select between 3-cylinder and 6-cylinder operation modes based on actual road conditions.
6
2
Share

How to Connect Bluetooth in Cavalier?

Cavalier Bluetooth connection method: 1. Press the menu shortcut key under the central control display screen to find the phone option; 2. Click on Bluetooth settings, after turning on Bluetooth, the car Bluetooth will automatically search for devices or the phone can click on car Bluetooth to connect; 3. After successful pairing, the information display screen will show the names of connected and paired devices. Note that pairing can only be done when the car is stationary, the effective distance for Bluetooth connection is about 10 meters, and any other devices blocking within this range may affect communication quality. If the distance is exceeded, the connection will be interrupted, and when the device re-enters the effective range, the connection will automatically resume. Taking the Cavalier 320 manual Xinxiang version as an example, it is equipped with a 1.3L L3 engine and a 5-speed manual transmission, with a naturally aspirated intake form.
16
5
Share

At what temperature does the Chevrolet Cruze thermostat open?

The Chevrolet Cruze thermostat opens at around 70 to 80 degrees Celsius. The working principle of the thermostat is that when the cooling temperature is below the specified value, the refined paraffin in the thermostat's temperature-sensitive body remains solid, and the thermostat valve closes the channel between the engine and the radiator under the action of the spring. The coolant returns to the engine via the water pump, performing a small circulation within the engine. The thermostat is a valve that controls the flow path of the coolant and is an automatic temperature-regulating device, usually containing a temperature-sensitive component that opens or closes the flow of air, gas, or liquid through expansion or contraction. The Chevrolet Cruze is a compact car equipped with a 1.4T 150 horsepower L4 engine, with a maximum power of 110 kW and a maximum torque of 240 Nm.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.