What are the reasons for the Chevrolet Malibu's air conditioning not cooling?

1 Answers
Florence
07/29/25 8:08pm
The reasons for the Malibu's air conditioning not cooling may include excessive contaminants in the refrigerant and refrigeration oil, a loose compressor drive belt, damaged air conditioning flaps, insufficient refrigerant, damaged air conditioning compressor, throttle or expansion valve, or water in the pipes. Here are some precautions for using car air conditioning: 1. Do not immediately turn on the internal circulation after entering the car in summer. 2. Turn off the air conditioning before shutting down the engine when parking. 3. Avoid keeping the internal circulation on for too long. 4. Do not adjust the air conditioning vents randomly. 5. Do not set the air conditioning temperature too low. 6. Turn on the internal circulation immediately after entering the car in summer.
Was this review help?
6
0
Share
More Forum Discussions

Can Motorcycles with Temporary License Plates Drive on Highways?

Motorcycles with temporary license plates can drive on highways. Purchasing a Motor Vehicle: Purchase from a legitimate manufacturer or dealer. After purchasing the vehicle, obtain the relevant purchase documents. If the purchased vehicle is imported, you will receive the Certificate of Imported Goods, the Imported Vehicle Inspection Sheet, and the Motor Vehicle Purchase Invoice. These documents are required for applying for a temporary license plate. Required Documents: You need to bring the Imported Vehicle Inspection Sheet, the Motor Vehicle Sales Invoice, the Certificate of Imported Goods, the Compulsory Traffic Accident Liability Insurance Policy, and the buyer's ID card. Prepare two copies of each document. Applying for a Temporary License Plate: Visit the local traffic police branch vehicle management station that issues temporary license plates. You can find the address on the local traffic management bureau's website.
1
4
Share

What does it mean when a Mercedes-Benz displays 'increase after starting'?

When a Mercedes-Benz displays 'increase after starting', it means the energy-saving mode has been activated. ECO: The display of 'increase after starting' in ECO mode indicates the activation of the energy-saving mode. ECO is a symbol for green driving mode, which comes in two forms: passive and active. Active ECO modes have a switch; once ECO is activated, the vehicle's computer reduces the sensitivity to manual operations and controls the vehicle's acceleration and driving state more in line with fuel-saving patterns. History of Mercedes-Benz: Mercedes-Benz is a German automobile brand, one of the premium car brands, renowned for its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star is one of the most recognizable automotive and brand logos. In October 2016, Mercedes-Benz ranked 9th in the list of the world's 100 most valuable brands. From the birth of the automobile to the present day, the history of Mercedes-Benz is not just a legend but also represents the development history of the human automotive industry.
18
4
Share

Can You Still Drive When the Water Temperature Warning Light Is On?

You should not drive when the water temperature warning light is on. The illumination of the water temperature warning light indicates that the vehicle's engine temperature is too high, and continuing to drive may damage the engine's power system. The reasons for excessively high water temperature include: 1. Insufficient coolant due to low fluid levels or leaks; 2. Abnormal heat dissipation caused by a faulty cooling fan; 3. Abnormal circulation heat dissipation due to a faulty water pump; 4. Engine malfunction or cooling system failure. The reasons for excessively low water temperature include: 1. A damaged thermostat; 2. A constantly running cooling fan. The normal operating range for a car's water temperature gauge is between 70 and 90 degrees Celsius. Its function is to indicate the temperature of the coolant in the radiator while the engine is running. The engine requires a specific operating temperature for normal performance, and temperatures that are too high or too low can adversely affect engine operation and performance.
1
5
Share

Will the undercoating fall off if sprayed on tires?

Undercoating sprayed on tires will not fall off. Corrosion protection for the chassis: Car rust usually starts from the bottom plate. For example, washing water may remain at the bottom, and over time, it can become a potential corrosion factor, causing damage to the vehicle; Heat insulation and fuel saving: When entering summer, the cold air from the car's air conditioner sinks downward, while the hot air from the ground outside rises upward. Most of the cold and hot air exchange occurs on the vehicle's floor. The effectiveness of the vehicle's bottom protection directly determines the efficiency of the cooling energy utilization. After the vehicle's bottom is treated, the honeycomb-structured sound-absorbing factors in the coating will completely isolate the cold and heat; Noise reduction: When driving on highways, the friction noise between the wheels and the road surface is proportional to the speed. A well-protected vehicle bottom can significantly reduce the noise inside the car.
5
3
Share

What gear is reverse?

Reverse is the gear for backing up. The purpose of the reverse gear: The function of the reverse gear is singular and straightforward—it allows the vehicle to move in the opposite direction, enabling it to back up. This function is indispensable for any car. In manual transmission vehicles, the reverse gear also serves as a hill-holding brake; when parking on a downhill slope, engaging the reverse gear can mechanically lock the drive shaft. How to use the reverse gear: The reverse gear is used differently in manual and automatic vehicles. For manual vehicles, after coming to a complete stop, press the clutch and brake pedals, shift into reverse gear, and then perform a semi-clutch operation with slight acceleration. For automatic vehicles, you need to press the brake pedal and either press the safety button on the gear lever or push down the gear selector to engage or disengage the R (Reverse) gear. You can switch directly between P (Park) and R, or between N (Neutral) and R, but when switching between a forward gear and R, you should pause at N to reduce the impact of reverse oil flow in the transmission during gear changes.
16
5
Share

Should Mercedes-Benz Use Full Synthetic or Semi-Synthetic Oil?

Mercedes-Benz uses full synthetic oil. Benefits of full synthetic oil: Full synthetic oil is thinner than semi-synthetic oil, providing better lubrication and heat dissipation. Full synthetic oil can form a molecular oil film for liquid lubrication that remains between two metal surfaces even after the engine stops working. This means the engine receives continuous protection even when it is not running. Types of engine oil: Engine oil can be classified into mineral oil, semi-synthetic oil, and full synthetic oil. Oil change intervals: If using mineral oil, it is generally recommended to change it every six months or after driving approximately 5,000 kilometers. For semi-synthetic oil, change it every 7-8 months or around 7,500 kilometers. If using full synthetic oil, it can be changed after one year or approximately 10,000 kilometers.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.