What are the reasons for the Chevrolet Cruze shock absorber making noise under pressure?

1 Answers
MacCorey
07/30/25 3:06am
The reasons for the Chevrolet Cruze shock absorber making noise under pressure are: 1. Damage to the shock absorber plane bearing; 2. Loose lower control arm ball joint; 3. Excessive clearance in the balance rubber bushing. The Chevrolet Cruze is a compact 5-door, 5-seat hatchback with body dimensions of: length 4450mm, width 1807mm, height 1459mm, wheelbase 2700mm, and fuel tank capacity of 52 liters. The Chevrolet Cruze is equipped with a 1.5L naturally aspirated engine and a 6-speed automatic transmission, with a maximum power of 84 kilowatts and a maximum torque of 146 Newton meters. It features front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using a torsion beam non-independent suspension.
Was this review help?
13
1
Share
More Forum Discussions

How to Remove the Steering Wheel of a Chery Car?

The method to remove the steering wheel of a Chery car is: 1. Use a small flat-head screwdriver to pry up the plastic cover on the steering wheel where the horn is located, and you will see the screws; 2. Hold the steering wheel firmly with one hand and unscrew the screws with the other hand to remove the steering wheel. Taking the Chery QQ as an example, its body dimensions are 3564mm in length, 1620mm in width, and 1527mm in height, with a wheelbase of 2340mm. In terms of power, the Chery QQ is equipped with two types of engines, 1.1L and 0.8L. The 1.1L engine is sourced from Dongan, with a maximum power of 38.5kW and a maximum torque of 83Nm.
2
1
Share

How to check the fuel consumption of Dongfeng Fengshen AX7?

The method to check the fuel consumption of Dongfeng Fengshen AX7 is: 1. Rotate the key to position 0; 2. Press the set and reset buttons at the top of the light control lever; 3. Turn the key to position II, and the fuel consumption will appear on the dashboard. Dongfeng Fengshen AX7 is a compact SUV launched by Dongfeng Fengshen, with body dimensions of 4645mm in length, 1880mm in width, and 1690mm in height, and a wheelbase of 2715mm. In terms of power, the Fengshen AX7 is equipped with a 1.6-liter turbocharged engine, delivering 170 horsepower and a maximum torque of 250 Nm, with the maximum power output at 5500 rpm.
20
2
Share

How to Clean Scale from a Car Radiator?

Cleaning scale from a car radiator involves the following steps: 1. Ensure the engine is cool and turned off, then remove the radiator cap; 2. Open the drain plug at the bottom of the radiator to allow the coolant to flow into a bucket; 3. Close the drain plug and fill the radiator with water; 4. Start the engine, turn on the heater control system, add a cooling system cleaner, and let the engine idle for 30 minutes; 5. Turn off the engine and let it cool for 5 minutes; 6. Fill the radiator with water again and let the engine idle for 5 minutes. The car radiator, generally referring to the heat exchanger, is part of the vehicle's cooling system. The radiator in an engine's water cooling system consists of three parts: the inlet tank, outlet tank, main plate, and the radiator core.
14
3
Share

How to touch up car paint?

Car paint touch-up methods are: 1. Completely remove rust, dirt, and grease from the paint surface. You can use ultra-fine water sandpaper dipped in water to gently sand away rust spots; 2. Carefully use tape to demarcate the area above and below the scratch; 3. Shake the touch-up pen vigorously more than 30 times to ensure the paint is evenly mixed; 4. After waiting for 3 days, remove the tape and observe the paint surface. Carefully inspect the damaged area of the car. If the damage exceeds one-third of the component, a transitional repair method should be used. Transitional repair involves applying clear coat to the entire component and blending the color coat from the damaged area to the original paint, which maximizes the retention of the original car paint and avoids color mismatch issues.
2
0
Share

What does 1.5L equivalent to with a T?

1.5L is equivalent to 1.2 to 1.3 with a T. Under the same displacement conditions, engines with a T are more powerful than those with an L. 1.5L refers to a 1.5-liter naturally aspirated engine, while 1.5T refers to a 1.5-liter turbocharged engine. The 'L' in 1.5L stands for naturally aspirated, which means liters, and the 'T' indicates the addition of a turbocharger to the naturally aspirated engine. 1.5T means a turbocharger is added to the 1.5L naturally aspirated engine. Under the same conditions, the performance of a 1.5T engine is equivalent to that of a 1.8L engine.
16
2
Share

Does an Expired Temporary License Plate Affect Vehicle Registration?

An expired temporary license plate does not affect vehicle registration, but it affects the vehicle's operation on the road. If you find that your temporary license plate has expired, the vehicle management office may notify you to proceed with obtaining a new permanent plate, but you definitely cannot drive with an expired temporary license plate. New vehicles should not use temporary license plates for more than 15 days, and owners should promptly apply for a permanent license plate from the vehicle management authority. If the permanent license plate has not been received yet, you can only apply for another temporary license plate. According to regulations, the following situations may result in refusal of registration: 1. The proofs or certificates submitted by the vehicle owner are invalid; 2. The origin certificate of the vehicle has been altered, or the vehicle owner recorded in the origin certificate does not match the identity proof; 3. The proofs or certificates submitted by the vehicle owner do not match the vehicle.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.