What are the reasons for the Chery Fengyun 2 stalling after starting?
2 Answers
Introduction to the reasons for Chery Fengyun 2 stalling after starting: Severe carbon buildup in the car engine: If the car engine has severe carbon buildup and the fuel cannot burn effectively in the cylinders, the vehicle may stall after starting. In this case, the carbon buildup in the engine should be cleaned promptly. Triggering the car's anti-theft system: If the car's anti-theft system is triggered, the engine may start but cannot operate normally, causing the vehicle to stall automatically after starting. This situation is common after replacing the car key or battery, so it is essential to recode the key after such changes. Ignition switch failure: If the car's ignition switch fails, the vehicle may stall automatically after starting, and the malfunction indicator light may turn on. This issue is more complex and requires inspection and repair by professionals at a car repair shop or 4S store. Low fuel system pressure: If the car's fuel system pressure is low, the fuel will not burn effectively, and the fuel system needs to be inspected.
My Fengyun 2 has encountered the issue of stalling immediately after startup, which is mostly caused by a dirty throttle body leading to poor air intake. When the car can't draw enough air, it will stall, especially older vehicles that are prone to carbon buildup and blockage. During cleaning, carefully remove the throttle body and thoroughly scrub it with professional cleaning agents. If the problem persists, check whether the idle control valve is stuck or if there's a sensor malfunction. The idle valve is located in the engine compartment near the firewall. If you're doing it yourself, be careful not to damage any parts. Frequent occurrences of such issues can jeopardize driving safety. It's recommended to inspect the intake system during every maintenance session to prevent carbon buildup and prolong the vehicle's lifespan.
