···
Log in / Register

What are the reasons for the Changan Eado stalling while driving?

4 Answers
DiDelaney
09/06/25 5:00am
It could be caused by poor fuel flow in the vehicle, faults in components such as the fuel injector and spark plug. Below is relevant information: 1. Carbon deposits: Carbon deposits include cylinder carbon deposits, throttle carbon deposits, spark plug carbon deposits, and intake carbon deposits. These areas are closely related to the engine's power output. When there is excessive carbon buildup inside the engine, the vehicle's ignition energy decreases, intake efficiency drops, ultimately leading to reduced engine power, resulting in sluggish acceleration and a muffled sound. 2. Fuel system: Adding incompatible fuel octane ratings can cause a decrease in the vehicle's output power and reduced performance. Alternatively, if the fuel tank cap vent is blocked, or if the fuel tank switch, fuel filter, or the fuel line between the fuel tank and the carburetor are partially clogged, it may not meet the required fuel supply, leading to a lean air-fuel mixture and weak engine acceleration.
Was this review help?
2
3
Share
SanLandon
09/18/25 4:53am
I used to drive a Changan Eado and often encountered sudden engine stalls while driving. The main reasons could be fuel system issues, such as a faulty fuel pump or clogged fuel filter. Insufficient fuel supply causes the engine to stop, especially during acceleration. Another common cause is excessive carbon buildup, where dirty fuel injectors lead to uneven fuel distribution. I've experienced this myself – a sudden stall on the highway is extremely dangerous, requiring immediate pulling over for inspection. Regular maintenance of the fuel system is crucial: clean the fuel tank periodically, replace filters before problems arise. A severely dirty air filter can also affect the air-fuel mixture, potentially causing engine stalls. Ultimately, these issues relate to daily driving habits – always pay attention to changes in engine sound while driving.
Was this review help?
11
5
Share
Expand All
Claire
11/01/25 5:18am
From an electrical perspective, frequent stalling in the Changan Eado is often related to circuit malfunctions, including insufficient battery charge or an aging alternator, which can cause the engine to stop due to power interruption. Burned-out relays or fuses may also trigger stalling, as the vehicle's control system requires stable voltage to operate. I once tested with a voltmeter and found that fluctuating voltage was the issue. Additionally, aging ignition coils or spark plugs can cause ignition failure, leading to sudden stalling. If the Electronic Control Unit (ECU) has bugs, it can also result in the same problem, though restarting the car sometimes resolves it. It's advisable to regularly check the battery's lifespan, as electronic components are more prone to failure during high summer temperatures—ensure proper ventilation and cooling. If the car stalls, don't panic; first, shift to neutral and try restarting.
Was this review help?
11
2
Share
Expand All
ReeseFitz
11/01/25 5:20am
I've encountered the issue of the Eado stalling several times, mainly due to faulty sensors or small components. For instance, a malfunctioning throttle position sensor can send erroneous signals causing the engine to stop. Another major reason is air entering the fuel line, leading to poor fuel supply. When driving this car, I noticed unstable idling was a precursor, which was later resolved by a mechanic who checked the fuel pump. Safety-wise, be aware that the steering wheel may become heavy after stalling, so slowly pull over to the side for inspection and repair.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

What is the reason for the fault light on the Maxus G10 and the throttle not accelerating?

The fault light on the Maxus G10 indicates that the engine oil level is insufficient and needs to be replenished immediately. Below is relevant information about the Maxus G10: 1. Introduction: The SAIC Maxus G10—a spacious MPV—combines numerous outstanding configurations, showcasing its strong capabilities in terms of power, space, technology, and image, fully meeting the diverse needs of consumers. 2. Powertrain: Powerful speed drives leading performance, featuring a 1.12.0T turbocharged direct-injection engine. Maximum power is 225 HP, peak torque reaches 345 N.m, and the power per liter is as high as 82.5 kW/L. 3. Performance: Utilizing European classic double-stitching technology and wrapped in high-grade genuine leather, it creates a comfortable cabin atmosphere. Additionally, it is equipped with butterfly-wing-style headrests that extend from the center to the sides, providing optimal support for the head and neck of both drivers and passengers. It also features ergonomic leg rests, electric adjustment, ventilation, heating, and massage functions, making every journey a royal European-style experience.
19
0
Share

What are the common faults of the Maxus G10 diesel version?

The overall quality of the SAIC Maxus G10 is relatively good among its peers in the domestic brand segment. Here is some relevant information about the Maxus G10: 1. Introduction: The SAIC Maxus G10—a spacious MPV that integrates numerous outstanding configurations. Whether it's power, space, technology, or image, it fully demonstrates its substantial capabilities, comprehensively meeting consumers' all-around needs. 2. Powertrain: Powerful speed drives leading performance, featuring a 1.12.0T turbocharged direct-injection engine. Maximum power reaches 225HP, peak torque up to 345N.m, with a specific power output as high as 82.5kW/L. 3. Performance: Adopts European classic double-stitching technology and high-grade leather wrapping to create a comfortable cabin atmosphere. Additionally, it is equipped with butterfly-wing wrapped headrests that extend from the center to the sides, providing optimal support for the head and neck of drivers and passengers. It also includes ergonomic leg rests, electric adjustments, as well as ventilation, heating, and massage functions, making every journey feel like a royal European experience.
5
1
Share

What engine does the DS7 use?

The DS7 engine is produced by the Xiangyang Engine Plant of Dongfeng Peugeot Citroen Automobile Company (DPCA) and is a domestically manufactured engine. The DS7 engine model is EP6. The low-power version has a maximum power of 133kW, a maximum horsepower of 180, and a maximum torque of 250 Nm. The high-power version has a maximum power of 158kW, a maximum torque of 215Nm, and a maximum horsepower of 300. For daily maintenance of the DS7 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To avoid malfunctions, the oil should be changed regularly based on usage conditions, and the oil level should be kept moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
14
4
Share

What are the main differences between steel-belted tires and nylon tires?

Differences between nylon tires and steel-belted tires: 1. Different specification codes: Nylon tires: "-" represents nylon tires, and the specification is expressed as 900-16. Steel-belted tires: "R" represents steel-belted tires, and the specification is expressed as 900R16. 2. Different materials: Nylon tires: The main material is nylon, and the sidewall is marked with NYLON. Steel-belted tires: The main material is steel, with a fine steel wire mesh inside the rubber layer of the tire, and the sidewall is marked with STEEL. 3. Different structures: Nylon tires: Bias-ply, old-fashioned structure, with the carcass composed of multiple layers of crisscrossed nylon cord layers. Steel-belted tires: Radial carcass composed of a single layer of radial steel cord layers. The tread is fixed by multiple layers of steel belts, and the functions of the sidewall and tread pattern are relatively independent. 4. Different cord arrangements: Nylon tires: The carcass cords are arranged in a crisscrossed mesh pattern between layers, forming an angle of 35-45 degrees with the circumferential centerline of the tread. Steel-belted tires: The carcass cords are arranged parallel to each other in a radial pattern, forming a 90-degree angle with the circumferential centerline of the tread. 5. Different treads: Nylon tires: The tread is thinner, and the stress is mainly borne by the cord layers of the carcass, with the tread bearing only 10%~20% of the stress. Steel-belted tires: The tread is thicker and has a hard belt layer, capable of bearing 60%~75% of the stress. Advantages and disadvantages of nylon tires and steel-belted tires: 1. Nylon tires: Good longitudinal rigidity, suitable for medium-speed driving on ordinary roads, but the structural design is somewhat unreasonable, affecting development, and they are gradually being phased out. 2. Steel-belted tires: Less prone to punctures, large radial elasticity, good cushioning performance, and higher load capacity, but the sidewalls are thinner and more prone to damage, with poor lateral stability, high manufacturing technical requirements, and high costs.
13
1
Share

What is the fuel consumption of the 2020 VV6?

The fuel consumption of the 2020 VV6 is approximately 10 liters per 100 kilometers. Here are some additional details: 1. The 2020 VV6 is a compact SUV equipped with a new 2.0T engine, delivering a maximum power of 167 kW and a maximum torque of 387 Nm. 2. The engine features direct fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. It is paired with a 7-speed dual-clutch transmission, providing robust performance. 3. The steering wheel offers minimal resistance with a small turning radius and no dead zone. The tires provide strong grip, resulting in minimal body roll during high-speed cornering.
7
0
Share

Is Diesel Engine Lubricating Oil the Same as Engine Oil?

Engine lubricating oil is indeed engine oil. Below is an introduction to engine oil-related content: Increased fuel consumption: When adding engine oil, the oil level should be between the upper and lower limits on the dipstick. If too much engine oil is added, the oil volume will expand as the engine temperature rises, increasing pressure in the oil chamber and operational resistance. This can lead to reduced vehicle power and increased fuel consumption. Overfilling engine oil: Excessive engine oil can cause oil to leak through the crankcase vent pipe, increasing crankcase pressure. The oil seal may loosen due to the oil pressure, resulting in oil leakage. Heat dissipation: Overfilling engine oil can affect engine heat dissipation.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.