What are the reasons for the car wiper not resetting?
2 Answers
The reasons for the car wiper not resetting are: 1. Drive motor failure; 2. Various circuit faults; 3. Wiper stuck or open circuit; 4. Aging of wiper rubber strip; 5. Foreign objects between the rubber strip and the windshield. The solutions for the car wiper not resetting are: 1. Replace the drive motor; 2. Check all circuits; 3. Replace the wiper; 4. Replace the wiper rubber strip; 5. Clean foreign objects between the rubber strip and the windshield. The replacement method for car wipers is: 1. Lift the wiper arm from the windshield and keep it perpendicular to the windshield; 2. Press the tab and remove the old wiper blade; 3. Insert the new wiper and rotate until the hook snaps into place.
I've been driving for over 20 years and often encountered the issue of wipers not returning to their original position after operation. There are various reasons for this, the most common being mechanical jams—such as rusted or broken linkages or gears—that hinder smooth rotation. It could also be due to motor failure, where the motor doesn't turn sufficiently, leaving the wipers stuck. Electrical issues, like blown fuses or poor switch contact, can also cause the system to mistakenly think it's not in operation. Routine checks aren't too difficult: first, see if there are leaves or ice debris stuck under the wiper blades, then inspect the corresponding fuse in the fuse box. If you can't handle it yourself, it's best to visit a repair shop promptly—driving with poor visibility in the rain is extremely dangerous. Last time it happened to me, I nearly rear-ended another car. Remember, prevention is better than cure; regularly lubricating the wiper joints can prevent many issues. In short, don't delay—safety comes first.
