What are the reasons for the car's wipers not moving?
3 Answers
The reasons for the car's wipers not moving are: 1. Displacement of the transmission linkage; 2. Fuse damage; 3. Damage to the wiring and turn signal combination switch; 4. Wiper motor damage. The method for replacing the wipers is: 1. Lift the wipers upright; 2. Press the clip below and remove the wiper blade; 3. Take off the wiper; 4. Pry up the front end of the middle clip; 5. Insert the wiper into the middle clip, pull it tight by hand, and the replacement is complete when a clicking sound is heard. The function of the wipers is: to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety. The maintenance methods for wipers are: 1. Use windshield washer fluid to clean the front windshield; 2. Regularly clean or replace the wiper blades; 3. Replace the linkage components.
Over my many years of driving, I've frequently encountered situations where the wipers stop working. Common causes include blown fuses, aging wiper motors, seized transmission mechanisms, or insufficient lubrication. When the motor fails, you'll hear a buzzing sound but no movement, and loose wire connections can also lead to poor contact. When faced with non-functioning wipers, my usual approach is to start by checking the fuse box and trying a spare fuse; if the wipers are frozen in winter, simply turning on the heater to slowly thaw them will do. Driving with impaired visibility is extremely dangerous, so it's important to pull over immediately and inspect the issue. Cleaning the wiper arms to prevent rust during each car wash can help reduce such problems.
As a young car owner, I've figured out several main reasons why wipers stop working: blown fuses are the most common occurrence, often caused by short circuits due to post-rain humidity; damaged motor windings can cause the wipers to jam and stop rotating; wiper arms getting stuck by foreign objects or freezing in winter are also frequent issues. Wiring harness connection problems or switch failures may also lead to malfunction. Clear visibility is crucial for safe driving - never risk driving with faulty wipers. Immediately check the fuse or try manually moving the wiper blades. For prevention, regularly apply lubricant to the transmission joints to avoid rainwater accumulation.
