What are the reasons for the car's cooling fan to keep running?

1 Answers
DiLydia
07/30/25 6:42am
The reasons for the car's cooling fan to keep running are: 1. Insufficient coolant causing engine overheating; 2. Radiator leakage; 3. Thermostat failure; 4. Excessive dust on the radiator surface. The solutions for a continuously running car cooling fan are: 1. Add or replace coolant; 2. Replace the water temperature sensor; 3. Clean dust from the radiator. The replacement method for a car cooling fan is: 1. Open the car's engine hood and remove the intake pipe located above the cooling fan; 2. Unscrew the screws at the four corners; 3. Replace the cooling fan; 4. Secure the screws; 5. Install the intake pipe; 6. Close the engine hood.
Was this review help?
5
4
Share
More Forum Discussions

What does it mean when the stability control system light is yellow?

The stability control system light turns yellow due to an electronic control system malfunction. Here is additional information: 1. Function of ESP: ESP stands for Electronic Stability Program, known as the vehicle stability control system. If the ESP warning light on the dashboard remains lit after starting the car, it may indicate an ESP malfunction. If the ESP light comes on while driving, reduce your speed, avoid excessive steering and sharp turns, and find a nearby 4S store as soon as possible to check the cause. 2. Application of ESP: It is mainly used to address the risk of tailspin and loss of control caused by emergency obstacle avoidance and continuous steering. When avoiding obstacles in an emergency, ESP intervenes to increase the driving force of the wheels. When a tailspin tendency occurs, ESP will brake the opposite wheel to reduce rotation, helping the vehicle follow the driver's steering intention.
20
2
Share

How to upgrade the system of Changan CS55?

The method to upgrade the Changan CS55 system is: 1. Download the system to a USB flash drive; 2. Insert it into the car's central control USB interface for installation. Taking the 2019 Changan CS55 as an example, it belongs to the compact SUV category, with body dimensions of: length 4500mm, width 1855mm, height 1690mm, wheelbase 2650mm, fuel tank capacity 58L, and curb weight 1460kg. The 2019 Changan CS55 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 156PS, maximum power of 115kW, maximum torque of 225Nm, paired with a 6-speed manual transmission.
4
0
Share

Where is the engine number of Foton Motor located?

The engine number of the Foton View G7 is located on the upper right side of the engine block near the flywheel housing. It is generally a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle's driving license has the engine number printed, usually located on the second-to-last line; The motor vehicle registration certificate will specify the engine number; The car purchase invoice will specify the engine number; The vehicle purchase tax payment certificate will specify the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, and each engine can only use one engine number, with each engine's number being unique.
16
2
Share

Why Does an Automatic Transmission Car Jerk When Braking?

Automatic transmission cars may experience jerking when braking due to sludge circulating in the transmission fluid, which can clog the oil passages in the valve body. Extended content: Tips for maintaining your transmission: 1. Regularly check the automatic transmission fluid level: Unlike engine oil, which is checked when the engine is cold, automatic transmission fluid should be warmed up to approximately 50°C before checking. After shifting the gear lever through each position for 2 seconds and placing it in park, the fluid level on the dipstick should be between the high and low marks. 2. Add automatic transmission protectant: Mix in a ratio of 5%. For older vehicles, it's advisable to add a bottle of automatic transmission leak stopper to rejuvenate aging seals and prevent leaks. 3. Follow the recommended transmission fluid change interval: Generally, automatic transmission fluid should be changed every 2 years or 40,000-60,000 kilometers. Since the normal operating temperature of transmission fluid is around 120°C, always use high-quality transmission fluid.
16
1
Share

Does Anti-Fog Agent Affect Car Film?

Anti-fog agents do not affect car films. Anti-fog agents utilize dispersed anti-drip materials and nano-organic active agents. After treatment with an anti-fog agent, the glass surface forms a super-hydrophilic nano-film, which turns fog into a low-freezing-point mixture upon contact, thereby preventing fogging. Precautions for using anti-fog agents: 1. Store in a well-ventilated area, avoiding direct sunlight, proximity to fire sources, or heat sources; 2. Do not inhale the mist, as it may cause drowsiness or dizziness; 3. Do not crush, puncture, or burn the canister. Empty cans are flammable and should be discarded promptly; 4. Keep out of reach of children and store away from them; 5. Ensure a sufficient thickness of the anti-fog film to guarantee excellent anti-fog performance.
5
0
Share

What are the symptoms of a faulty thermostat in the Buick Excelle?

The symptoms of a faulty thermostat in the Buick Excelle are as follows: 1. Water temperature warning light on: Thermostat failure, the thermostat opening is too small, affecting the engine's large and small circulation, preventing effective heat dissipation, leading to an increase in engine water temperature and the water temperature warning light illuminating. 2. Abnormal noises: The thermostat opening is too large, causing the engine water temperature to be too low, slow water temperature rise, increased fuel consumption, and abnormal engine noises. 3. Water temperature warning light on: The thermostat is stuck, easily forming carbon deposits, leading to unstable engine idle speed and causing engine vibration. Additional information: In the automotive engine cooling system, the car thermostat automatically adjusts the amount of water entering the radiator based on the cooling water temperature, changing the range of water circulation to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within an appropriate range.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.