What are the reasons for the car radiator not circulating water?

1 Answers
OPatrick
07/24/25 11:30pm
The reason for the car radiator not circulating water is a blocked water pipe. The method to check for a blocked water pipe is: 1. Fill the radiator with water, cover the radiator cap, and start the engine; 2. Clamp the radiator hose and press the accelerator; 3. When the engine speed increases, if the hose shows suction and collapse, it proves the radiator is functioning normally; if not, it indicates a blockage. Precautions for car radiator water circulation: 1. When the engine's water temperature is high, the water inside the water pump circulates repeatedly to lower the engine's temperature. In winter, when the water temperature is low, the water circulation should be stopped to prevent the engine temperature from becoming too low; 2. When the engine coolant in the radiator boils at high temperature, the vaporization and expansion cause the pressure to exceed the set value, leading to overflow from the radiator cap for pressure relief, which can result in reduced coolant and burst pipes in the cooling system.
Was this review help?
16
4
Share
More Forum Discussions

What Should Beginner Drivers Pay Attention to When Driving on the Road?

Beginner drivers should pay attention to using turn signals, displaying the novice driver sign, maintaining a safe distance, etc. The specific precautions are as follows: Familiarize yourself with the route in advance: Before hitting the road, it's best for beginners to check the route to their destination. They should become familiar with the road conditions to avoid going in the wrong direction. Beginners who have just learned to drive must control their speed and avoid driving too fast, especially in crowded areas. They must stay alert and clearly distinguish between the brake and accelerator pedals. Learn to use the rearview mirrors: Using the rearview mirrors is crucial. Whether changing lanes or making turns, always check the mirrors for oncoming vehicles. Remember to use turn signals: Beginner drivers should also remember to use the appropriate turn signals when turning. Many beginners forget this, and the same applies when overtaking—always use the turn signal. Have an experienced driver accompany you: If your driving experience is limited, consider having an experienced driver accompany you. They can provide guidance from the passenger seat. Display the novice driver sign: Place the novice driver sign on the rear window of your car—it can be very helpful for beginners. Maintain a safe distance between vehicles: Beginner drivers often struggle to estimate the length and size of their vehicles. Therefore, it's advisable to keep a larger gap and distance between vehicles while driving to avoid rear-end collisions.
19
5
Share

What is the method for removing the gear shift lever of an Audi A6L automatic transmission?

Here is the method for removing the gear shift lever of an Audi A6L automatic transmission: 1. Use a screwdriver to pry off the small silver ring under the shift lever; 2. While pulling the silver button, pull the ball head to remove it. Additional information: 1. Taking the 2020 Audi A6L as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm, and a fuel tank capacity of 73 liters. 2. The 2020 Audi A6L features a five-link independent suspension at the front and rear, and is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, maximum power of 140kW, maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
20
4
Share

How often should the coolant in the New Santana be replaced?

The maintenance manual for the New Santana specifies that the coolant should be replaced every 45,000 kilometers or 60 months. Coolant, also known as antifreeze coolant, is a liquid composed of antifreeze additives, additives to prevent metal corrosion, and water. It needs to have properties such as antifreeze, anti-corrosion, heat conduction, and resistance to deterioration. The New Santana has a body length, width, and height of 4473mm, 1706mm, and 1469mm respectively, with a wheelbase of 2603mm. The new Santana series is equipped with a 1.5-liter naturally aspirated engine, which delivers 112 horsepower and a maximum torque of 145 Nm. The engine's maximum power is achieved at 6100 rpm, and the maximum torque is reached at 4000 rpm.
5
2
Share

Is SWM a Domestic or Joint Venture Car Brand?

SWM is a domestic car brand. SWM offers a wide range of SUV models, including the G01, X3, G05, X7, and more. The G05 is a midsize SUV with dimensions of 4750mm in length, 1860mm in width, and 1780mm in height, and a wheelbase of 2750mm. This model is equipped with two engine options: a 2.0-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The 2.0-liter naturally aspirated engine delivers 143 horsepower and a maximum torque of 190 Nm, paired with a 5-speed manual transmission. The 1.5-liter turbocharged engine produces 156 horsepower and a maximum torque of 230 Nm, mated to a 6-speed automatic transmission.
12
1
Share

Does a Deteriorated Three-Way Catalytic Converter Affect the Vehicle?

A deteriorated three-way catalytic converter not only significantly increases fuel consumption, reduces power output, and causes exhaust emissions to exceed standards, but in more severe cases, it can cause the exhaust pipe to glow red-hot, potentially leading to vehicle self-ignition. For a long time, auto repair shops have lacked effective preventive measures or treatment methods for a deteriorated three-way catalytic converter. The only solution for a deteriorated catalytic converter is replacement. How to determine the condition of a three-way catalytic converter: Visual inspection. Check the exterior of the three-way catalytic converter for any damage or discoloration. If there are scratches, cracks, or other visible damage, it is likely that the catalytic converter has been compromised. If there are noticeable gray spots in the center of the converter's protective cover, severe discoloration spots, or purple marks on the shell, the catalytic converter may have suffered from overheating. Check the engine's exhaust condition. Place your hand near the exhaust pipe outlet to feel the exhaust flow and check whether the catalytic converter is clogged or if there is restricted exhaust flow. Another method is to open the air filter, remove the filter element, and observe whether exhaust gas flows backward during rapid acceleration, indicating restricted exhaust flow. To assess the condition of the TWC (Three-Way Catalyst), also check whether the secondary air injection pump is functioning properly. Use an infrared thermometer for judgment. Compare the temperature difference between the front and rear of the TWC using an infrared thermometer. If the temperature difference between the inlet and outlet of the catalytic converter is less than 10°C, the TWC is likely damaged.
9
3
Share

What brand is the Roewe i5 transmission?

"The Roewe i5 uses a CVT transmission independently developed by SAIC. This transmission can simulate 8 gears, enhancing the car's smoothness. It has a high compatibility with the engine, providing relatively smooth driving force whether during rapid acceleration or sudden deceleration. The Roewe i5 has upgraded to 16-inch two-tone wheels and a 12.3-inch LCD digital interactive combination instrument panel. At the same time, the 4G-connected entertainment driving system in the car has also been upgraded. Additionally, the new car has undergone certain adjustments in terms of configuration, adding a new 1.5L ADAS version model equipped with ACC adaptive cruise control, AEB automatic emergency braking, SAS intelligent speed assistance, and other features."
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.