What are the reasons for the car not starting?

3 Answers
McHaven
07/29/25 4:44pm
Reasons for the car not starting: Incorrect starting method, improper fuel mixture ratio, etc. Incorrect starting method: Incorrect starting method, such as not closing the choke during a cold start, or not pressing the float sinker, resulting in an overly lean combustible mixture entering the cylinder; during a hot start, closing the choke or pressing the float sinker multiple times, causing an overly rich combustible mixture to enter the cylinder, leading to the spark plug being "flooded" and the engine failing to start. Improper fuel mixture ratio: Check the spark plug to determine whether the issue is with the ignition system or the fuel supply system based on the strength of the spark.
Was this review help?
3
3
Share
OwenRose
08/14/25 6:17am
It's really frustrating when the car won't start. The most common reason is a dead battery – it could be due to loose or corroded connections, or leaving the lights on and draining the power. Another possibility is a faulty starter motor, where you hear a clicking sound when turning the key but the engine doesn't crank. Alternatively, it might be an issue with the ignition system, such as failed spark plugs or a malfunctioning crankshaft position sensor. In cold weather, poor gasoline flow or thickened engine oil can also cause starting problems. First, I'll check if the battery voltage is normal (above 12V) using a multimeter, and then inspect whether the cables are securely connected. If it's a starting issue, replacing the relay or cleaning the connections might help. Regular maintenance, like timely battery replacement and oil changes, can prevent such troubles. If all else fails, seek roadside assistance for a jump-start or call a tow truck – safety comes first.
Was this review help?
15
3
Share
Expand All
DiCorey
10/13/25 2:49am
There are several common reasons why an engine won't start: A dead battery is the most frequent cause, due to corroded terminals or aging after prolonged use; starting system failures such as a stuck starter or burnt relay; ignition system issues like dirty spark plugs or faulty ignition coils; fuel system problems including a non-working fuel pump, clogged fuel lines, or an empty tank. Additionally, an activated anti-theft system or mismatched keys could also be the culprit. My usual approach is to listen for sounds first: if turning the key yields no response, check the battery and connections; if there's a clicking sound but the engine doesn't turn over, the starting components might be faulty. Next, test the ignition (spark plug sparks) and check the fuel pump (listen for a humming sound). If these aren't the issues, engine-specific problems like a broken belt require professional attention. Developing a good habit of checking the fuel gauge before driving can save a lot of hassle.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

How to Deal with Foggy Windows in a Car?

To handle foggy windows in a car, you can follow these methods: 1. Open the windows to create air convection between the inside and outside of the car, which will reduce the temperature difference and make the fog disappear; 2. Turn on the car's defogging function, and select the appropriate cold or warm air from the air conditioner to use the air blown by the air conditioner to defog. The steps to turn on the defogging function are: 1. Open the driver's door; 2. Press the car's brake pedal to start the engine; 3. Press the car's one-touch start button; 4. All the dashboard lights will turn on, indicating that the engine has started; 5. Press the defogging button located on the center console.
15
5
Share

What is the difference between the internal and external circulation of a car's air conditioning system?

Car air conditioning internal and external circulation mainly differ in the following aspects: 1. Different states. Internal circulation mode closes the airflow channel between the inside and outside of the vehicle. Without the fan, there is no airflow circulation, and when the fan is on, the inhaled airflow only comes from inside the vehicle, forming an internal airflow circulation. External circulation mode uses the fan to draw air from outside the vehicle into the cabin, allowing air to flow between the outside and inside. The air blown by the fan comes from outside, and even without the fan, airflow is still drawn into the cabin while driving. 2. Different functions. Internal circulation primarily prevents external dust and harmful gases from entering the cabin promptly and effectively, such as when driving through smoke, dust, areas with strong odors, or in heavy traffic, blocking harmful exhaust emissions from vehicles ahead. External circulation allows for breathing fresh air from outside the vehicle.
9
1
Share

What Causes the Abnormal Noise When Shifting Gears in an Automatic Transmission?

Automatic transmission shifting produces abnormal noise due to the following reasons: 1. The release bearing lacks lubricant, causing dry friction or bearing damage. 2. There is no clearance between the release bearing and the inner end of the release lever. 3. Severe oil contamination or dust accumulation between the release bearing sleeve and the guide tube, or fatigue, breakage, or detachment of the release bearing return spring and pedal return spring, resulting in poor return of the release bearing. 4. Loose fit between the spline hole of the driven plate and its spline shaft. 5. Annealing, fatigue, or breakage of the driven plate damping springs. 6. Loose rivets or exposed rivet heads on the driven plate friction disc. 7. Wear and looseness of the drive pins of the double-disc clutch and the pin holes in the intermediate pressure plate and pressure plate.
4
1
Share

What is the correct order for disconnecting car battery cables?

When disconnecting car battery cables, the correct order is to remove the negative terminal first, followed by the positive terminal. A car battery, also known as a storage battery, is a type of electrochemical cell that converts chemical energy into electrical energy. Typically, what people refer to as a car battery is a lead-acid battery, which consists of lead and its oxides with sulfuric acid solution as the electrolyte. The functions of a car battery include: 1. Providing a powerful starting current to the starter motor when starting the engine; 2. Assisting the alternator in powering electrical equipment when the generator is overloaded; 3. Supplying power to electrical devices when the engine is idling; 4. Protecting the vehicle's electrical appliances; 5. Converting part of the electrical energy into chemical energy for storage (charging) when the generator's terminal voltage exceeds the electromotive force of the lead-acid battery.
8
0
Share

Where is the windshield washer fluid added in a Changan car?

Windshield washer fluid is located at the left edge of the engine compartment. The method of adding windshield washer fluid is very simple, and car owners can do it themselves. In northern regions, antifreeze-type windshield washer fluid should be selected, while in southern regions, windshield washer fluid with added insecticide components can be used. The refill capacity for Changan CS35 windshield washer fluid is 3.3L, and the washer fluid tank capacity is approximately 3.8L. After opening the hood, you need to locate the windshield washer fluid reservoir. Most cars have a universal indicator symbol on the washer fluid reservoir cap, which is the same for all vehicles globally. Simply open the reservoir cap to add the windshield washer fluid. Generally, about 2 liters need to be added. There is a dipstick inside the reservoir; add the fluid while checking the level, and stop when it reaches the marked line to avoid overflow and unnecessary waste.
4
5
Share

What does it mean when a wrench light appears on the car's display panel?

The small wrench is a maintenance indicator light, reminding the driver that the vehicle requires servicing, not indicating a malfunction. It is a very user-friendly design feature that typically appears during the key-turn self-check. After maintenance, simply reset this reminder. Below is relevant information about vehicle maintenance: 1. Vehicle maintenance refers to the periodic preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of the vehicle, also known as vehicle servicing. 2. Modern vehicle maintenance primarily covers the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more. 3. The purpose of vehicle maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent malfunctions, slow down deterioration, and extend the service life.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.