What are the reasons for the car body sweeping the line when exiting the garage to the right?

2 Answers
DiEzra
09/03/25 3:45am
Right exit garage body sweep line reason is garage edge too close to body, steering too late, steering too little. Garage edge too close to body: Due to inconsistent distance between the car body and the garage edges on both sides during parking, one side of the garage edge is too close to the body, causing the line to be swept. If the first attempt at parking doesn't find the correct reference point for successful parking, timely adjustment is needed. Steering too late: Because the wheels are not located at the endpoints of the car body, when reversing, the reference might be the position of the rear wheels while ignoring the car body. Steering too late will cause the car to angle towards the garage, making the turning radius larger than the distance from the garage line to the car's turning center point at that time, so the car body will sweep the line. Steering too little: When entering the garage, the car is too angled and the steering is too little. After entering the garage, the car is angled (front narrow and rear wide, or front wide and rear narrow) because after entering the garage, both sides were not observed, and only one side mirror was checked. The correct approach is to observe both sides after entering the garage, checking the parallelism between the car body and the edge lines. Only when both sides are equally wide and the shape is the same can the steering wheel be straightened.
Was this review help?
3
5
Share
SamanthaMarie
09/15/25 5:24am
When I was learning to drive, the issue of scraping the line while making a right turn out of the parking space was really frustrating. The main reasons were turning the steering wheel too early or too late, especially for beginners who lack experience and easily misjudge the rear wheel trajectory. For example, if you rush into a right turn, the car's turning angle might be off, causing the rear bumper to scrape against the parking line. Or, if the speed is too high, poor control can lead to scraping. Additionally, the size of the vehicle matters: larger vehicles have a smaller turning radius, making small SUVs more prone to issues if not handled properly. The solution is to practice low-speed turns more often, keep a close eye on the rearview mirror, and ensure the car adjusts its angle gradually when leaving the parking space. It's best to reverse slightly before turning and avoid turning the steering wheel fully at once. Practicing in open areas to develop spatial awareness can help prevent this problem.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

Where is the OBD interface of Changan Xinbao Mini located?

The OBD interface of Changan Xinbao Mini is located below the steering wheel, above the clutch and brake on the left side, under a cover marked with OBD. Pull the cover downward to open it. Below is the relevant introduction: Meaning of OBD: OBD is the abbreviation of On-Board Diagnostics, translated into Chinese as the onboard automatic diagnostic system. This system continuously monitors the engine's operating condition to check if the vehicle's emissions exceed the standard. If they do, it will immediately issue a warning. Function of OBD: When a system failure occurs, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate. At the same time, the Powertrain Control Module (PCM) will store the fault information in memory. The fault code can be read from the PCM through a specific procedure. Based on the fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault.
18
1
Share

What is the solution for the sunroof rattle in the Magotan B8?

Solution for the sunroof rattle in the Magotan B8: Check the sunroof slide rails and apply some lubricating grease appropriately. Inspect the sunroof's fixation as looseness may cause the rattle, and tighten the relevant components accordingly. Here are some details about the Magotan B8: Causes of the rattle: The sunroof sealing strip is prone to aging. Spraying rubber conditioner can temporarily restore the strip's performance, and adjusting the sunroof screws can eliminate the rattle. Appearance: The front of this car features a widened slatted chrome grille, paired with rectangular-designed headlights on both sides and new wide chrome front fog lights, giving the new Magotan a more powerful visual impact. On the side profile, two sharp edges form the waistline, extending from the front fenders on both sides all the way to the rear, making the side lines of the car more elongated and robust, full of sportiness.
6
4
Share

What are the dimensions of an oil drum?

The dimensions of oil drums typically include 5L, 10L, 20L, and 25L. Here is more relevant information: 1. Methods to prevent oil drum leaks: Ensure the oil drum has a suitable lid and is properly sealed. Regularly inspect the drum for corrosion, bulges, defects, dents, and leaks. Place defective drums in separate secondary containment barrels or emergency spill containers. Ensure compatibility between the drum and its contents. For example, do not store acids in ordinary iron drums or solvents in plastic drums. Clearly label waste oil drums. 2. Oil drum storage conditions: If oil drums are to be stored outdoors, ensure that rainwater does not enter. For secondary containment measures, use waterproof tarps to cover spill pallets, spill platforms, or IBC spill pallets to protect against rain, sunlight, and prevent pests or birds from accessing the containers. Fixed outdoor storage areas must comply with relevant regulations such as the 'Code for Fire Protection in Building Design.' Items that may explode, combust, or decompose when exposed to water, moisture, sunlight, or dust contamination should not be stored outdoors for extended periods.
2
2
Share

What does BMW fault code 5462 mean?

BMW fault code 5462 indicates an internal issue with the transfer case in the BMW X5. Symptoms of BMW fault code 5462: Due to problems with the transfer case, the vehicle may experience body shaking. When driving at high speeds around 40 or 60 mph, the car may shake. Additionally, when turning with the steering wheel fully locked, shaking may also occur, leading to a frustrating driving experience. These issues are all related to the transfer case. Solution for BMW fault code 5462: All BMW four-wheel-drive vehicles use the "xDrive" system, where the rear-wheel drive is rigidly connected for constant drive, and the front-wheel drive is transmitted through a set of wet clutches. Due to inconsistent power distribution between the front and rear and the absence of an inter-axle differential, the problem can be resolved by either removing the front axle drive shaft (caution is required for some models as the drive shaft flange may detach during testing) or by pulling the transfer case fuse.
19
3
Share

What are the consequences of insufficient transmission fluid?

Here are the symptoms of insufficient manual transmission fluid: 1. After starting the engine, there is a "whooshing" noise from the transmission, which disappears when the clutch pedal is pressed and reappears when the pedal is released; 2. The transmission temperature is very high, feeling hot to the touch; 3. Only a small amount of fluid can be drained when attempting to change the transmission fluid; 4. Upon disassembling the transmission, abnormal wear can be observed on the gear surfaces, with severe cases showing blue discoloration due to overheating; 5. Bearings may be burnt or even shattered; 6. Gear surfaces appear dry, with no signs of splashed transmission fluid. Here are the symptoms of insufficient automatic transmission fluid: 1. Reduced transmission fluid leads to insufficient acceleration power and inability to speed up. 2. Severe lack of transmission fluid can render the vehicle immobile. 3. Even with good transmission fluid, internal components may still be damaged due to overheating.
5
1
Share

Where is the rear tow hook on the Song MAX?

The Song MAX does not have a rear tow hook, only a front tow hook. Definition of tow hook: A tow hook, also known as a tow ball, is a towing device connected to the rear bumper beam of a vehicle. It is primarily installed on ordinary household vehicles to tow trailers weighing less than 1,700 kg, as well as towable caravans. Of course, it can also be used to install rear-mounted luggage racks or bicycle racks, etc. Relevant regulations on installing tow hooks: According to the "Motor Vehicle Registration Regulations" issued by the Ministry of Public Security, it is permissible for small and micro passenger vehicles to install front and rear anti-collision devices. Therefore, installing a tow hook is legal as long as it complies with the regulations for the specific vehicle model. However, tow hooks that protrude beyond the body of the vehicle are not allowed to be installed, as Article 16, Paragraph 1 of the "Road Traffic Safety Law" stipulates that unauthorized modification of the structure, construction, or characteristics of a motor vehicle is illegal.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.