What are the reasons for the buzzing sound when the Baojun 730 is running?

1 Answers
KeiraMarie
07/25/25 1:31pm
The reasons for the buzzing sound when the Baojun 730 is running are: 1. Air leakage in the engine intake pipe; 2. Improper installation of the air filter or detachment of the vacuum hose; 3. Excessive tire pressure leading to wear on the tire crown and reduced shock absorption; 4. Wear and looseness of the wheel hub bearings. Solutions: 1. Check whether the chassis screws are loose and inspect if the lower control arm bushings are loose; 2. Check if the valve clearance is adjusted to the appropriate position, and adjust it if there is any displacement. Taking the 2021 Baojun 730 Manual Fashion 7-seater as an example: It is an MPV launched by SAIC-GM-Wuling, with a length, width, and height of 4780mm, 1780mm, and 1740mm respectively, and a wheelbase of 2750mm. It is equipped with a 1.5T turbocharged engine, with a maximum power of 108kw and a maximum torque of 250nm, paired with a 6-speed manual transmission.
Was this review help?
15
5
Share
More Forum Discussions

Does a motor vehicle need to undergo an on-site inspection in its sixth year?

A vehicle in its sixth year must undergo an on-site annual inspection. The six-year exemption from inspection refers to non-operational passenger cars and other small and micro passenger vehicles (excluding minivans and vehicles with 7 or more seats), which are exempt from on-site inspection within the first six years. Relevant information about vehicle annual inspection is as follows: 1. Introduction: Vehicle annual inspection (Vehicles-inspection), also known as motor vehicle inspection. Depending on the usage nature of the motor vehicle, the inspection items and scope may vary. 2. Inspection items: According to the definition in RB/T218-2017 "Requirements for Qualification and Competence Assessment of Inspection Bodies - Motor Vehicle Inspection Institutions", motor vehicle inspection includes three categories: motor vehicle safety technical inspection, motor vehicle emission inspection, and comprehensive vehicle performance inspection.
2
5
Share

How to Determine if the Coolant Temperature Sensor is Faulty?

When experiencing difficulty in starting the engine when cold, it is necessary to consider a faulty coolant temperature sensor. If the temperature gauge needle points to the highest position or does not move at all, a faulty coolant temperature sensor should be suspected.
7
2
Share

How to Turn on Both Front and Rear Fog Lights on a Camry?

When the headlights are on, rotate the ring knob on the light control lever. The first position turns on the front fog lights, and the second position turns on the rear fog lights. The second position immediately returns to the first position. To turn off the rear fog lights, rotate the knob to the second position again. When the headlights are on, simply flick the lever twice in succession.
2
5
Share

What does the car displacement L mean?

In cars, L stands for liter and T stands for ton. Here are the specific details: 1. L: L is the abbreviation for liter. It is a unit of volume increase, referring to the displacement of the car engine. For example, 1.5L means the engine has a displacement of 1.5 liters. 2. T: T is the abbreviation for Turbo. It refers to an engine equipped with an intake turbocharger. For example, 1.5T means a 1.5-liter displacement engine with an added intake turbocharger. 3. Car displacement: A specialized term in hydraulic transmission, it refers to the volume of fluid inhaled or discharged per stroke or cycle. Car displacement is an important parameter to measure a car. Some domestic cars do not have the car model marked as above, but their displacement is usually indicated on the body or rear of the car.
19
1
Share

How to Adjust the Left and Right Rearview Mirrors for Subject Three?

For the left rearview mirror, adjust the vertical position so that the ground occupies the center of the mirror, and you cannot see yourself in the central rearview mirror. Here are the detailed instructions: 1. Left rearview mirror: Adjust the vertical position so that the ground occupies the center of the mirror. For the horizontal position, ensure that the lowest point of the rear wheel touching the ground is visible, and try to keep the car body occupying 1/4 of the mirror. 2. Right rearview mirror: Since the driver's seat is on the left, it is more difficult to monitor the right side of the car. Therefore, when adjusting the vertical position of the right rearview mirror, the ground should occupy 2/3 of the mirror, and the wheel arch (the curved, protruding part above the wheel resembling an eyebrow) of the rear wheel should be visible. For the horizontal position, adjust it so that the car body occupies 1/4 of the mirror. 3. Central rearview mirror: Adjust the horizontal position so that the left edge of the mirror aligns with your right ear in the reflection. Generally, you should not see yourself in the central rearview mirror. For the vertical position, place the distant horizon at the center of the mirror.
8
0
Share

How to turn off the fog lights on the Nissan Qashqai?

On the left-hand stalk, there is a switch for adjusting the headlights, and the rotating part inside can be used to adjust the lights. Rotate the knob in the middle of the light control stalk to the "OFF" position to turn off the fog lights.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.