What are the reasons for the brake pedal being hard to press in an automatic transmission car?

1 Answers
McNatalie
07/30/25 6:07am
Automatic transmission car brake pedal being hard to press is caused by: 1. The key fob battery is dead; 2. Failure of the car's vacuum booster pump; 3. Obstruction on the brake pedal; 4. Brake system failure. The brake system consists of a vacuum booster pump, master cylinder, wheel cylinder, brake pads, and brake discs. Methods of applying brakes under different circumstances are: 1. When the brake pedal is abnormal, use engine braking and shift to a lower gear; 2. In traffic congestion, press the brake pedal gently; 3. On rainy and muddy roads, lightly press the brake pedal repeatedly; 4. In emergency situations, press the brake pedal hard immediately and then release it slowly, followed by repeatedly pressing and releasing the brake pedal gently.
Was this review help?
1
5
Share
More Forum Discussions

Why is the reversing image too white?

The reason why the reversing image is too white is: there is a problem with the adjustment of the reversing camera or the display screen. The function of the reversing image is: to allow the driver to see the situation behind the car on the display when reversing, to avoid accidents caused by the driver not seeing the rear situation when reversing, and to improve driving safety. The working principle of the reversing image is: it is a rearview technology based on visual measurement, which relies on the camera at the rear of the car to display the road conditions behind the car on the central display screen. The driver can move the square representing the car body freely on the screen through the touch screen. If the position is appropriate, the square will change from red to green. At this time, as long as the reverse gear is engaged and the speed is controlled, automatic reversing can be completed.
17
1
Share

What are the symptoms of a faulty clutch switch?

The symptoms of a faulty clutch switch include: 1. The engine fails to start; 2. Jerky deceleration and rough gear shifting; 3. High engine RPM after pressing the clutch. The clutch is a device that transmits the power of the car engine to the axle in an on-off manner. It is installed between the engine and the transmission and is the assembly in the car's drivetrain that directly connects to the engine. The maintenance methods for the clutch are: 1. Clean thoroughly before installation to remove anti-rust grease and debris; 2. For wet electromagnetic clutches, lubricating oil needs to be added between the friction plates during operation; 3. During coaxial installation, axial fixation is required to prevent axial movement between the driving part and the driven part; 4. For split-shaft installation, the coaxiality between the driving part and the driven part shaft should not exceed 0.1mm.
9
5
Share

How to Use the Seat Belt Pretensioner Function in Audi A6L?

Audi A6L's seat belt pretensioner function is used as follows: After fastening the seat belt, start the ignition, shift to D gear, and the seat belt will automatically tighten. The body dimensions of the Audi A6L are: length 5050mm, width 1886mm, height 1475mm, wheelbase 3024mm, minimum ground clearance 117mm, and fuel tank capacity 73L. The Audi A6L is equipped with a 2.0T turbocharged engine, with a maximum power of 140kW and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission. It uses a five-link independent suspension for both front and rear suspension types.
2
1
Share

Where is the cabin air filter located in the Dongfeng Peugeot 307?

The cabin air filter in the Dongfeng Peugeot 307 is located under the front windshield on the passenger side. The cabin air filter functions to absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, enhance driving comfort, and protect the air conditioning cooling system. The Dongfeng Peugeot 307 has the following body dimensions: length 4212mm, width 1762mm, height 1531mm, wheelbase 2608mm, minimum ground clearance 117mm, and fuel tank capacity 60 liters. The Dongfeng Peugeot 307 is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 86 kW and maximum torque of 150 Nm, paired with a 5-speed manual transmission.
1
0
Share

How to Disassemble an Old Mercedes Remote Key?

The disassembly method for an old Mercedes remote key is: 1. Push the small toothed switch at the end of the remote to the right and remove the mechanical key; 2. Insert a tool into the rear of the keyhole and pry to open it. Mercedes models include: Mercedes E-Class, Mercedes A-Class, Mercedes S-Class, Mercedes G-Class, Maybach, etc. Taking the Mercedes E-Class as an example, its body dimensions are: length 5078mm, width 1860mm, height 1484mm. The Mercedes E-Class is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 184PS, maximum power of 135kW, maximum power speed of 5800 to 6100rpm, and is paired with a 9-speed automatic transmission.
8
4
Share

What are the body dimensions of the Cadillac XT6?

Cadillac XT6 body dimensions are: length 5056mm, width 1964mm, height 1780mm, with a wheelbase of 2863mm. Body dimensions refer to the size and data between various components of the vehicle. Its fuel tank capacity is 73 liters, luggage compartment capacity ranges from 257 to 922 liters, and the curb weight is 2000kg. The Cadillac XT6 is equipped with a 2.0T turbocharged engine, with a maximum power of 174 kilowatts, maximum power speed of 5000 revolutions per minute, and maximum torque of 350 Newton-meters. It is paired with a 9-speed automatic transmission.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.