What are the reasons for the blurry reversing image in the Murano?

What to Do When the Car Shows an Engine Fault?

If the engine fault light is on, you can follow these steps: First, check if the engine is running normally, whether there are issues like shaking or black smoke. If so, try not to start the engine again. Specifically, do not start the engine if the red warning light is on. If the engine can be started, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The car will perform a self-check after powering on. Wait for 5-10 seconds and observe whether the fault light on the dashboard turns off. If the fault light remains on, visit a service station as soon as possible to diagnose the issue. The service station can use a portable diagnostic tool to read the fault code, identify the problem, and perform targeted repairs. There are seven main reasons why the engine fault light may illuminate: 1. Sensor Fault: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors may be damaged, have poor contact, or lose signal. This prevents the car's ECU from accurately obtaining engine data, triggering the fault light. 2. Fuel or Oil Quality Issues: Using fuel or oil that does not meet the manufacturer's specifications may cause engine wear, leading to the fault light turning on. 3. Poor Combustion of Air-Fuel Mixture: Poor combustion can cause engine carbon buildup or knocking. The oxygen sensor detects this and reports it to the ECU, which then illuminates the fault light as a warning. Issues such as faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can lead to poor combustion. 4. Turbocharger Problems: The intake boost pipe or turbocharger can also cause the engine fault light to turn on. The most common issue is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. 5. Intake Issues: If the car's intake system is problematic, it may cause engine pipe blockages, which can trigger the fault light. A dirty or uncleaned air filter can lead to intake problems. 6. Exhaust Issues: Exhaust system faults can also cause the engine fault light to illuminate. Common causes include faulty rear oxygen sensors, catalytic converters, exhaust camshafts, or bearings. The catalytic converter is the most frequent culprit, often damaged by leaded gasoline, improper lubricant additives, physical impact, or fuel system issues. 7. Anti-Theft System Fault: If the car's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine ECU, the anti-theft system may prevent the engine from operating normally, while also triggering the fault light.

14

1

Share

How soon can I schedule the Subject 4 test after passing Subject 3?

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses", there are mainly three scenarios: taking the test directly in the afternoon of the same day, no appointment required within 9 days, or scheduling after 10 days. Subject 4, also known as the Subject 4 theoretical test or driver's theory test, is part of the motor vehicle driver's license assessment. It includes requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Subject 4 Test Notes: Test Duration: The test lasts 45 minutes, and making 10 mistakes (5 questions) will terminate the session. Number of Questions: Depending on the type of license, 50 questions are proportionally selected from the Subject 4 question bank. For car licenses, questions are drawn from 800, while for large vehicle licenses, they are drawn from 1,023. Each question is worth 2 points. Question Types: The test includes single-choice questions (including true/false questions) and multiple-choice questions. Questions may involve animations, images, scenario recognition, or text descriptions. Retake Notes: If you fail Subject 4, you only need to retake Subject 4. The driving school will schedule the retake, with no limit on the number of attempts. No retake fees are required for Subject 4. Subject 4 Test Tips: Strengthen weak areas and identify reasons for mistakes. For marked questions, avoid merely memorizing the correct answer. Instead, consult regulations, textbooks, or reference materials to understand and internalize the reasons for errors. Categorize and summarize questions. Refer to the question bank's analysis to group similar questions. Many questions in the bank are similar and easily confused, so it's helpful to analyze them together. For example, traffic signs for "walking," "pedestrian," "caution pedestrians," "crosswalk," and "caution crosswalk" are visually similar and easily mixed up. Grouping them during study reduces errors. Use memory techniques. Many questions involve numbers, which can be summarized for easier recall. The driving test consists of three main subjects: Subject 1, Subject 2, and Subject 3, with Subject 3 divided into two parts. Subject 4 is the colloquial term for the Subject 3 safe and civilized driving knowledge test, not a separate subject. Subject 1 covers traffic safety laws, regulations, and related knowledge. Subject 2 is the field driving skills test. Subject 3 includes road driving skills and safe and civilized driving knowledge, with the latter conducted after Subject 3.

9

5

Share

What to Do When the Car Is Nearing Its Maintenance Period Before a Long Trip?

It depends on the mileage. If it significantly exceeds the recommended range, it is advisable to perform maintenance before the trip. Here is relevant information: 1. Car Maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The purpose of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life. 2. Maintenance Items: Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.

10

3

Share

What are the dimensions of a 9.6-meter truck?

9.6-meter trucks typically have a height of around 2.5 meters, a width of approximately 2.3 meters, and a cargo compartment length of 9.6 meters. Below is relevant information about trucks: 1. Note: The height and width of 9.6-meter trucks vary slightly between different brands, but the differences are minimal. 9.6-meter trucks require yellow license plates, and individuals with a Class C driver's license are not permitted to operate this type of vehicle. 2. Considerations: Truck engines are longitudinally mounted, and most trucks are rear-wheel drive. The cargo compartment of a truck houses the drive shaft and exhaust pipe underneath. Different truck brands utilize varying engines and transmissions.

11

3

Share

What to Do About a Dented Vezel Hood?

Metal sheet repair, in simple terms, involves using effective methods to restore deformed parts of a car's metal body. For example, if the car's hood has a dent, metal sheet repair technology can effectively restore it to its original condition. Afterward, specialized paint is applied to ensure the repaired metal surface matches the rest of the undamaged areas in terms of shine and appearance. The process includes leveling the car body surface, applying primer, sanding, adding color paint adhesion, applying color paint, restoring the original paint surface color, and finally applying clear coat.

11

1

Share

Where is the spare tire of the Sylphy placed?

The spare tire of the Sylphy is placed under the partition in the trunk. The method for using the spare tire is as follows: 1. Prepare the tools for changing the spare tire, including a wrench and a jack; 2. The jack needs to be positioned under the car, as there are slots in the undercarriage designed for jack placement; 3. Remove the tire. When installing the spare tire, the jack may shift out of position. To minimize the risk of accidents, place the removed tire under the car; 4. Tighten the tire bolts. First, screw in one bolt, then proceed to screw in all the bolts. Typically, the number of turns should be the same to ensure even distribution of force on the bolts; 5. Slowly release the jack, remove it, and allow the car to settle steadily on the ground.

9

4

Share

What are the reasons for the blurry reversing image in the Murano?

What to Do When the Car Shows an Engine Fault?

How soon can I schedule the Subject 4 test after passing Subject 3?

What to Do When the Car Is Nearing Its Maintenance Period Before a Long Trip?

What are the dimensions of a 9.6-meter truck?

What to Do About a Dented Vezel Hood?

Where is the spare tire of the Sylphy placed?

Is the Evoque fuel consumption high?

What is the difference between the two-wheel drive and four-wheel drive versions of the Tiguan L?

How to reset the tire pressure monitoring on Great Wall H6?

What is the fuel consumption of the Buick Verano?