What are the reasons for the battery warning light on the Mercedes dashboard?

1 Answers
DelMadison
07/29/25 7:55pm
Common reasons for the red battery warning light on the dashboard include: Battery failure: Typically, a battery lasts 3-4 years unless driving habits are particularly poor; Battery sensor failure; Alternator failure; Rear SAM module failure; Auxiliary small battery failure; ECO auxiliary battery related relay failure; Front SAM module failure. Wiring harness or connector issues between these components: This usually causes the red battery warning light to appear intermittently. Signal transmission to the rear SAM control module: First, the battery sensor monitors the battery voltage signal and transmits this signal to the rear SAM control module. Transmission to the alternator control unit: Next, the rear SAM control module calculates the required voltage output from the alternator based on the battery voltage signal and transmits this voltage signal to the alternator control unit via the CAN bus. Control of alternator output: Third, the engine control unit then regulates the alternator output via the LIN bus.
Was this review help?
15
2
Share
More Forum Discussions

How Much Horsepower Does a 250 Engine Equivalent to?

250 rated power is around 10.5 kilowatts, which is approximately 14.2 horsepower. The following is an introduction to automobile engines: 1. Introduction: The automobile engine is the device that provides power for the car, serving as the heart of the automobile. 2. Function: It determines the car's power, fuel economy, stability, and environmental friendliness. Depending on the power source, automobile engines can be divided into diesel engines, gasoline engines, electric vehicle motors, and hybrids, among others. 3. Performance: Common gasoline and diesel engines are both reciprocating piston internal combustion engines, converting the chemical energy of fuel into the mechanical energy of piston movement to output power externally. Gasoline engines have high speed, low weight, low noise, easy starting, and low manufacturing costs; diesel engines have a high compression ratio, high thermal efficiency, and better economic and emission performance than gasoline engines.
19
2
Share

What are the tips for starting a manual transmission car at traffic lights?

Manual transmission traffic light starting tips: First, start the car in neutral, then quickly press the clutch pedal, shift into first gear, and slowly release the clutch until you feel the point where the car begins to move forward. Once you feel the wheels moving, hold the clutch steady and gently press the accelerator. Manual transmission traffic light starting precautions: 1. Always keep the clutch pressed; 2. Make sure to accurately find first gear when shifting; 3. After shifting into gear, slowly release the clutch to ensure the car doesn't jerk. Then apply the accelerator, but be sure to wait until the clutch is fully released before doing so. Don't get nervous while waiting at traffic lights. When there are 5 seconds left on the red light, you can press the clutch and slowly start releasing it. If you see the car in front move during the last second, gently press the accelerator while slowly releasing the clutch. This helps prevent stalling issues.
7
1
Share

What is the difference between Giti 221 and 228?

Giti 221 and 228 differ in performance and compatibility specifications. The specific differences are as follows: 1. Giti 221 focuses more on quietness and comfort; Giti 228 emphasizes wet road handling. 2. Giti 221: Tire specification 195/55R1 load index 687H, speed rating maximum load 545kg maximum pressure 300kPa. Giti 228: Tire specification 215 load index 55R1794, speed rating maximum load 670kg maximum pressure 300kPa/V. The functions of tires are introduced as follows: 1. Support the entire weight of the vehicle and bear the load of the car. 2. Transmit traction and braking torque to ensure adhesion between the wheels and the road surface. 3. Reduce and absorb vibrations and impacts during driving.
3
0
Share

How often should the Camry's transmission fluid be changed?

Camry transmission fluid should be changed every 60,000 kilometers. Transmission fluid is an oil product that keeps the gear system clean, ensuring normal transmission operation and extending the lifespan of the transmission components. It provides effective lubrication at low temperatures and reduces oil loss under harsh operating conditions. Below are the relevant specifications for the Camry: The Camry has a body size of 4,885mm in length, 1,840mm in width, and 1,455mm in height, with a wheelbase of 2,825mm. It is equipped with a 2.0L naturally aspirated engine and a CVT continuously variable transmission, delivering a maximum power of 131 kilowatts and a maximum torque of 210 Newton-meters. The drivetrain is front-engine, front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using E-type multi-link independent suspension.
10
2
Share

What is the maximum area of car stickers that does not violate regulations?

Car stickers that do not exceed 30% of the vehicle's body area do not violate regulations. The following is an introduction to car stickers: 1. Introduction: Car stickers are decals applied to cars, motorcycles, and other vehicles for aesthetic purposes. 2. Categories: (1) Sports stickers: Mainly referring to racing stickers, which vary depending on the type of race (circuit or rally) and the vehicle used. (2) Modification stickers: These are theme stickers specially designed by various modification manufacturers for exhibition cars to promote new products, often matching specific vehicle models or products, featuring vibrant colors and eye-catching designs. (3) Personalized stickers: Custom-made stickers tailored to the owner's personal preferences and tastes. (4) Special vehicle stickers: Their biggest advantage is clear colors and three-dimensional patterns, offering excellent visual effects.
4
3
Share

Is it easy to repair a car with bearing seizure?

Repairing a car with bearing seizure is quite challenging and requires professional expertise. Here's an introduction to automotive bearing seizure: 1. Overview: As the name suggests, the car's bearing fails and seizes the shaft. 2. Causes: (1) Poor quality of crankshaft or bearings. Especially for vehicles that have undergone major repairs with bearing replacements, if the shaft grinding and bearing scraping work wasn't precise enough. (2) Poor surface finish between the journal and bearing. (3) Improper fit between shaft and bearing after installation. If the contact area is too small to form an oil film, plus with clearance behind the bearing, the alloy and bearing can't fully adhere tightly, leading to loosening and outward movement, blocking oil holes and causing oil supply interruption resulting in dry friction.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.