What are the reasons for the Baojun 560 air conditioner not cooling well?

1 Answers
KatherineMarie
07/30/25 3:34am
The reasons for the Baojun 560 air conditioner not cooling well may include refrigerant leakage, damage to the room temperature sensor, or a blocked expansion valve. Refrigerant Leakage: If both the indoor and outdoor units are working and the compressor is also functioning, it could be due to refrigerant leakage. If the compressor does not rotate and overheats, it might be caused by a damaged compressor capacitor. A dirty condenser can also reduce the cooling efficiency of the air conditioner. Room Temperature Sensor Damage: If the air conditioner stops working once it reaches the set temperature, it may be due to a damaged room temperature sensor. Blocked Expansion Valve: A blocked expansion valve in the air conditioner prevents the refrigerant from circulating properly, resulting in no cooling.
Was this review help?
11
0
Share
More Forum Discussions

Is it serious to accidentally shift into P gear while driving?

Accidentally shifting into P gear while driving can damage the locking mechanism inside the transmission and easily damage the gear shift switch in the transmission. Here are the maintenance methods for the transmission: 1. Timely inspection of the transmission: It is necessary to promptly check the fluid level in the transmission to ensure it remains within the specified range and to replenish it in time based on actual working conditions. When replenishing, ensure that the newly added fluid is of the same type. When changing the fluid, take advantage of the transmission's operation to promptly drain the previous fluid and clean it. Regularly inspect the working condition of the transmission gears to ensure that the meshing between gears is in the best state, and clean them in time to ensure perfect coordination between gears and shafts. 2. Timely inspection of the condition of different connection parts of the transmission: During daily maintenance, check the condition of each connection part of the transmission to promptly detect any faults such as looseness, wear, or damage. Tighten any loose connection parts in time, and repair or replace any damaged positions promptly. Regularly check whether there is oil leakage or seepage at the oil seal of the shaft end face and the external joint, and replace any failed oil seals and gaskets in time.
15
4
Share

What Causes a Tubeless Tire to Detach from the Rim?

Tubeless tires detach from the rim when the tire continues to be driven after a puncture, causing the tire bead to lose contact with the outer edge of the rim. Here is some relevant information: 1. Tubeless Tires: Tubeless tires, also known as "low-pressure tires" or "pneumatic tires," are inflatable tires without an inner tube. They offer high elasticity, wear resistance, excellent traction, and heat dissipation. 2. Resetting Method: Use a high-power air pump to inflate the tire. Tubeless tires and rims are held together by air pressure—the more inflated the tire, the less likely it is to leak. New tires often experience air leakage if not fully inflated. If air leakage persists after inflation, it indicates an improper seal between the tire and rim or a small puncture. In such cases, a tubeless tire rust-proof leak sealant can be used without damaging the rim.
2
2
Share

What is the equivalent national emission standard for Euro 3?

Automotive Euro 3 corresponds to China's National III emission standard. The National III emission standard is introduced as follows: 1. The so-called National III standard refers to China's third-phase vehicle emission standard, which is equivalent to the Euro 3 emission standard in terms of tailpipe pollutant levels. The key difference is that new vehicles must be equipped with an OBD (On-Board Diagnostics) system. 2. The characteristic of the OBD system lies in the increased number of detection points and monitoring systems. Oxygen sensors are installed at both the inlet and outlet of the three-way catalytic converter, ensuring compliance through real-time emission monitoring, thereby better enforcing the Euro 3 emission standard. 3. When vehicle emissions fail to meet Euro III standards due to factors like fuel quality, implementing the National III standard will increase single-vehicle costs. To stably achieve the National III emission standard, vehicles must be equipped with technical measures that ensure pollutant emissions meet National III requirements, along with using fuel that complies with Euro 3 standards. 4. There is no significant difference between National III and Euro 3, as they are essentially equivalent with only minor adjustments in certain aspects. In China, segmented tailpipe emission measurements are adopted: at 25% load with a speed of 40 km/h (2540 load condition) and 50% load with a speed of 40 km/h (5040 load condition). In contrast, overseas measurements focus on the engine's instantaneous operating conditions under different working states.
9
3
Share

What is the actual speed when Gaode shows 115 km/h?

When a car is moving at a speed of 115 kilometers per hour, the actual speed may fluctuate between approximately 114 to 116 kilometers per hour. Here is some information about car navigation: 1. Function: As a tool for daily commuting, navigation serves purposes such as route planning, speed measurement, and traffic violation alerts. 2. Working Principle: Navigation typically uses real-time GPS satellite signals for positioning and speed measurement, or in other words, it locates the vehicle wirelessly. This means that sometimes these positioning signals may have errors, which are generally acceptable within a range of 1 kilometer per hour.
19
2
Share

Why does the DMV withhold the green book?

The DMV only needs to withhold the green book when the vehicle is mortgaged to a bank, and it will be held until the loan is fully repaid. Below is additional information: 1. Green book: The green book refers to the 'Motor Vehicle Registration Certificate.' It is called the green book because of its green color. 2. Motor Vehicle Registration Certificate: The Motor Vehicle Registration Certificate serves as proof of ownership for the motor vehicle and must be kept by the vehicle owner. It should not be carried in the vehicle, and if lost, it can be reissued. This certificate is required when handling procedures such as vehicle transfer, ownership change, or registration modification. It records all transactions related to the vehicle, etc.
8
5
Share

What are the pros and cons of buying a car in another location for registration?

Here are the pros and cons of buying a car in another location for local registration: 1. Pros: For some cities with license plate restrictions, users without a quota cannot register their cars locally and may need to go to another location to obtain a license plate. 2. Cons: (1) After-sales issues: Since the new automotive three-guarantee law clearly states that the seller is responsible, if there is a problem with the car, or even if it involves returning or exchanging the car, the buyer must return to the place of purchase, increasing the difficulty and cost of rights protection. (2) Road risks: Buying a car in another location increases the risks on the road. If an accident occurs and the new car insurance has not yet taken effect, it can cause certain troubles.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.