What are the reasons for the backlight of the Bora dashboard not lighting up?
3 Answers
There are many reasons why the dashboard lights of a car may not light up, including a blown fuse in the dashboard, a dead car battery, excessively bright external lighting, or the car lights not being turned on. The specific details are as follows: 1. Blown fuse in the dashboard: If the fuse in the dashboard is blown, it will not only cause the dashboard lights not to light up but also prevent the dashboard needles from moving. In this case, a new fuse needs to be replaced to avoid unnecessary trouble caused by the dashboard not functioning properly. 2. Solution: First, check the power supply fuse of the dashboard; if it is blown, it can be replaced. Then, disassemble the dashboard; the lighting bulbs are usually located at the back of the dashboard. Replace the bulbs that are not lighting up. Generally, if individual bulbs are not lighting up, it indicates that the fuse and wiring are not the issue.
The backlight of my Bora's dashboard is not working. The most common cause is a blown fuse. If other lights are still on after starting the car, check the fuse box first, which is usually located under the steering wheel or in the engine compartment. Refer to the manual to find the relevant fuse model, test it with a multimeter, and replace it if necessary. It could also be a bulb failure; older Bora models use ordinary bulbs that are prone to burning out. Check the bulb socket for oxidation or looseness. The control switch knob may have worn contacts or accumulated dust over the years, leading to malfunction. Short circuits or open circuits in the wiring are not uncommon, and connectors may loosen after vibration. DIY repairs can save money, but safety is paramount—operate with the engine off. If inexperienced, it's better to spend some money for a quick fix at a professional shop. Address the issue early to avoid accidents from not being able to see the speedometer at night. Regular checks can prevent such minor problems.
Every time the instrument lights on my Bora don't work, my first instinct is to check if the fuse is blown. In most cases, replacing it with a new one will fix the issue. The contacts on the light control switch might be worn out or stuck, causing accidental failure to turn on the lights; try turning it to the maximum position or cleaning the dust with a cloth. For wiring problems like short circuits or breaks, carefully measure the resistance at connection points. Although rare, internal LED module or controller failure in the instrument panel requires professional diagnosis. New cars with electronic systems are more prone to component failure due to voltage fluctuations. If the lights go out while driving, stop immediately and check without panicking; turn on hazard lights to alert other vehicles. This involves safety, so don't delay until dark when it's harder to drive—get it checked at a reputable shop to ensure reliable operation.
