What are the reasons for the automatic transmission failure in the Peugeot 307?

What is the fuel consumption of the GAC Trumpchi GS7?

GAC Trumpchi GS7 fuel consumption per 100 kilometers: 8.6-8.9L/100km. The GAC Trumpchi GS7 offers two powertrain versions: 1.8T and 2.0T, with the high-end 2.0T model equipped with an on-demand four-wheel-drive system. A total of five models are available. Below is a detailed introduction to the Trumpchi GS7: 1. Interior design: The GS7 features minor adjustments based on the GS8, with a more reasonable human-machine layout. For a large 5-seater SUV like this, space is not an issue for both front and rear passengers. 2. Powertrain: In addition to the 2.0T engine from the GS8, the Trumpchi GS7 also introduces a new 1.8T engine. The 2.0T version delivers a maximum power of 148kW (201PS) at 5200rpm and a maximum torque of 320Nm at 1750-4000rpm, paired with a 6-speed automatic transmission.

20

2

Share

How many points are deducted for stalling in Driving Test Subject 3?

Stalling during the Subject 3 test will result in a deduction of 10 points. Below is an introduction to the reasons for stalling: 1. Improper clutch and throttle adjustment: The main cause of stalling is usually the improper coordination between the clutch and throttle, or lifting the clutch too quickly when starting, i.e., releasing the pedal too fast. This leads to a mismatch between the engine's output power and the transmission input shaft's power, causing a sudden increase in friction and resulting in stalling. 3. Braking timing: Press the brake pedal, gently lift the clutch until you feel the car body shaking, as if it's ready to move. Then gently release the brake while keeping the clutch steady with your left foot. When releasing the brake, the car should move forward instead of rolling backward. The intensity of the car body shaking needs to be experienced during practice. If the brake is released too early, the force may be insufficient, leading to rolling. If the brake is not released when the shaking is very severe, stalling is likely to occur.

4

3

Share

What Causes Brake Noise When the Car is Cold?

The causes of brake noise when the car is cold are: 1. For new cars, since the brake pads and discs are new and still in the break-in period, they may produce a slight hissing sound, which is normal and usually disappears automatically after a few hundred kilometers; 2. There are foreign objects between the brake pads and discs, such as small particles like sand or small stones entering between them, which can cause a hissing sound; 3. The brake discs and pads are stuck together due to rust, causing noise. This usually happens after driving in the rain and then leaving the car unused for several days. The rust causes the brake discs and pads to stick together, resulting in noise when starting the car again, which is also normal; 4. The brake disc fixing screws are missing or excessively worn, causing a mismatch with the brake pads and resulting in noise; 5. The brake pads are nearly worn out, which may cause a screeching sound. If this occurs continuously for several days and the noise becomes louder and more frequent, it generally indicates that the brake pads are almost worn out and need to be replaced.

1

5

Share

How to Solve the Sunroof Noise Issue in the 2018 Magotan?

2018 Magotan sunroof noise solutions are as follows: 1. If there is noise when stationary, it may be due to substandard sealing components; if noise occurs when opening, it could be an issue with the lifting mechanism. 2. Use tissue paper to clean the left and right sliding tracks of the sunroof. Over time, debris particles can accumulate on the tracks, and when the sunroof moves along these tracks, it may rub against the debris, causing noise. Therefore, it is essential to keep the tracks clean. 3. Apply lubricant to both left and right sliding tracks of the sunroof. Spread the lubricant evenly along the tracks, ensuring it is applied precisely within the tracks and not outside. After application, reapply lubricant to the noisy areas to ensure smooth operation. The Magotan measures 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2812mm. Its robust V-shaped front grille exudes a steady and imposing presence, complemented by dynamic and stylish streamlined body contours.

15

0

Share

Are the Drain Holes of a New Car Opened by the 4S Store?

The drain holes of a new car are already in an open state, so there is no need for the 4S store to open them. Concept: Vehicle drain holes are outlets designed to drain accumulated water from the vehicle during rainy weather. Generally, the drain holes are located in the following areas: the front windshield of the engine compartment, the four corners inside the sunroof, the lower part of the front and rear doors, inside the fuel tank cap, at the bottom of the spare tire in the trunk, and the gaps between the front and rear headlights and the body fenders. Precautions: There is usually a drain hole below the fuel tank cap. If it becomes blocked, water may accumulate in the fuel tank during car washes or rainy weather, potentially causing damage to the fuel tank. The spare tire in the trunk is generally located in a lower part of the body. When driving through water, if the water level rises above the headlights, water may seep into the interior of the vehicle. The drain holes in this area are used less frequently.

17

1

Share

How to turn off the small wrench light on Tiggo 5?

The method to turn off the small wrench light on Tiggo 5 is: 1. Make sure the car is turned off; 2. Find the menu switch button on the steering wheel, insert the key and hold the switch button without releasing it, remember not to release it; 3. Turn the key to the second gear, which is the ON gear, the car will be powered on and start self-checking, at this time all warning lights will light up, which is normal, wait for the self-check to complete, during this period the switch button should still be held down; 4. After about 5 seconds, you will find that the small wrench has disappeared; 5. At this time, restart the car, and the maintenance light will no longer light up. The body dimensions of Tiggo 5 are 4506mm in length, 1841mm in width, and 1740mm in height, with a wheelbase of 2610mm. The extended flared fender design of the car looks very powerful, combined with the forward-leaning waistline, even in a static state, the whole car reveals a sense of eagerness to move.

5

0

Share

What are the reasons for the automatic transmission failure in the Peugeot 307?

What is the fuel consumption of the GAC Trumpchi GS7?

How many points are deducted for stalling in Driving Test Subject 3?

What Causes Brake Noise When the Car is Cold?

How to Solve the Sunroof Noise Issue in the 2018 Magotan?

Are the Drain Holes of a New Car Opened by the 4S Store?

How to turn off the small wrench light on Tiggo 5?

Which region does the license plate 'Yan' belong to?

What are the requirements for the Beijing license plate lottery?

How to Avoid Stalling During Half-Hill Start in Subject 2?

What size hole should be drilled for an M4 screw?