What are the reasons for the air conditioning not cooling in Wuling Zhiguang?

Is it normal to have water droplets or fog inside the taillight?

It is not normal. The specific situations are as follows: 1. Winter temperature differences: Large temperature differences in winter can cause condensation inside the headlights. In the structure of the car headlights, there is a vent pipe connected to the outside. 2. Purpose: The purpose is to allow the expanded gas inside the headlight to be discharged through the vent pipe when the headlight is turned on and the temperature rises. After the headlight is turned off, the temperature drops, and the internal pressure difference increases, drawing in outside air through the vent pipe. This can draw in humid air, causing condensation and fog inside the headlight. Additional information: Fog is likely to form after heavy rain or car washing, especially if care is not taken during washing and water is sprayed directly at the engine compartment or headlights with a high-pressure hose, allowing water droplets to flow inside. When the vehicle is driven through water, the engine and exhaust system, being significant heat sources, can generate large amounts of water vapor when rain falls on them. Some of this water vapor can enter the headlights through the vent pipe.

2

1

Share

What is the fuel consumption of the FJ Cruiser?

The FJ Cruiser has 3 models. Among them, the 2013 FJ Cruiser 4.0L and 2011 FJ Cruiser 4.0L, equipped with a 272 horsepower engine, have an NEDC fuel consumption of 11.9L per 100 km. The 2010 FJ Cruiser 4.0L, equipped with a 272 horsepower engine, has an NEDC fuel consumption of 11.6L per 100 km. The fuel tank capacity of all FJ Cruiser models is 72L. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 272 horsepower engine, the distance that can be covered with a full tank of fuel is 72/11.9*100=605 km. For models equipped with a 272 horsepower engine, the distance that can be covered with a full tank of fuel is 72/11.6*100=621 km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

3

4

Share

What are the reasons for the Honda Avancier's one-button start not working?

Below are the related reasons why the Avancier may not start: 1. Circuit or electronic failure: The first possible cause is a circuit or electronic failure. The occurrence of such a failure is usually very sudden and without any warning. Circuit failures include: blown fuses, open high-voltage coils, open low-voltage circuits, detached central ignition wires, leaking distributor heads, and damaged spark plugs. Electronic failures mainly refer to the central computer control board losing functionality. 2. Fuel system failure: Next is a fuel system failure. Engine stalling caused by fuel system issues often comes with symptoms such as weak engine performance and a spongy accelerator pedal. Possible fuel system failure points include: malfunctioning fuel pumps, blocked fuel lines, clogged fuel filters, failed carburetors, damaged injectors, etc. Sometimes, the fuel tank may be empty without the owner realizing it. Adding a few liters of gasoline can resolve all issues. 3. Mechanical failure: Lastly, it could also be a mechanical failure. Common mechanical failures include: broken timing belts (or chains), cylinder leaks with no pressure, etc. Another scenario is when the starter motor does not work or barely works. In such cases, the first thing to check is the battery or accumulator.

19

5

Share

Does Starting in Second Gear Really Damage the Car?

Starting in second gear can indeed damage the car. Although starting in second gear allows for a quicker take-off by reducing the process of releasing the throttle and shifting gears once, and enables deeper throttle application after starting to quickly shift to higher gears, it causes severe wear on the clutch and increases fuel consumption. Over time, insufficient power can lead to increased carbon deposits and abnormal engine operation. Severe wear on the clutch plate: Second gear does not provide the maximum torque, yet starting requires significant torque to avoid stalling. To prevent stalling, it is necessary to increase the throttle and raise the engine speed while the clutch is partially engaged. In this semi-engaged state, the clutch plate experiences the most severe wear, and with increased throttle, abnormal wear occurs, significantly reducing the lifespan of the clutch plate. Increased fuel consumption: Continuously increasing the throttle while the clutch is partially engaged results in much of the fuel simply causing the engine to idle without contributing to forward motion. While the additional fuel consumption may not be noticeable in one or two instances, prolonged starting in second gear will lead to a noticeable increase in fuel consumption per 100 kilometers. Higher risk of stalling and carbon deposits: If the throttle is not sufficiently increased during take-off, it can result in insufficient power, even causing the engine to stall. Stalling adds another ignition process, and even if the engine does not stall, struggling to start due to insufficient power can lead to incomplete combustion, resulting in carbon deposits. In severe cases, this can cause engine knocking, abnormal noises, and abnormal wear on the pistons and cylinders. Therefore, it is recommended to use first gear for normal starts, as it provides the maximum torque, making it the most suitable for smooth take-offs. This not only saves fuel but also prevents damage to the car.

16

4

Share

How Long is the BYD Battery Warranty?

BYD's new energy battery pack warranty is 8 years or 150,000 kilometers. The vehicle warranty is 6 years or 150,000 kilometers. Additionally, the battery cells come with a lifetime warranty service, which is generally higher than other electric vehicle brands in the same class. The battery packs of new energy vehicles have a limited lifespan. BYD's new energy vehicles use self-produced lithium iron phosphate (LFP) batteries and ternary lithium batteries. The specific advantages and disadvantages are as follows: Ternary Lithium Battery Advantages: Ternary lithium-ion batteries have high energy density, long cycle life, and are not afraid of low temperatures. Disadvantages: Insufficient stability at high temperatures. Application: Pure electric vehicles with high range requirements. It is the mainstream direction and suitable for northern climates, as the battery remains more stable in low temperatures. Lithium Iron Phosphate (LFP) Battery Advantages: Lithium iron phosphate batteries have excellent thermal stability, are safe, cost-effective, and have a long lifespan. Disadvantages: Low energy density and poor performance in low temperatures. Application: The internal chemical composition of these batteries only begins to decompose at temperatures between 500-600°C. They do not catch fire or explode under puncture, short circuit, or high-temperature conditions and have a long service life. However, the vehicle range is generally limited, and charging efficiency is low when temperatures drop below -5°C, making them unsuitable for winter charging needs in northern regions. In the battery sector, BYD has 100% independent research, development, design, and production capabilities. Currently, BYD's battery products cover consumer 3C batteries, power batteries (LFP and ternary batteries), solar batteries, and energy storage batteries, forming a complete battery industry chain. BYD is also the world's largest LFP battery manufacturer in terms of production capacity.

3

Share

What Octane Gasoline Should the Honda Avancier Use?

The Honda Avancier should use 92-octane gasoline, as this is the recommended fuel grade specified in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, you can also find this information on the fuel tank cap, where it is usually indicated. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is even higher, 98-octane gasoline is recommended. However, with the use of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade, as high-compression engines can also be tuned to use lower-octane fuel. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the Honda Avancier occasionally uses the wrong gasoline grade, simply switch back to the correct grade after the current tank is used up. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, using a higher-octane grade will not cause damage, but the increased octane number can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher-octane gasoline, using a lower-octane grade can cause engine knocking. The significantly lower octane number reduces the fuel's ignition point, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance occurs during the upward stroke. This resistance makes the engine run very unevenly. Mild knocking may only increase noise without obvious engine damage, but severe knocking indicates serious engine issues, affecting not only driving stability but also causing abnormal wear on the pistons and cylinders, potentially leading to cylinder scoring.

2

4

Share

What are the reasons for the air conditioning not cooling in Wuling Zhiguang?

Is it normal to have water droplets or fog inside the taillight?

What is the fuel consumption of the FJ Cruiser?

What are the reasons for the Honda Avancier's one-button start not working?

Does Starting in Second Gear Really Damage the Car?

How Long is the BYD Battery Warranty?

What Octane Gasoline Should the Honda Avancier Use?

Is the BMW X4 a four-wheel drive vehicle?

What happened to the out-of-control Mercedes-Benz owner later?

Should the windshield fluid be drained in sub-zero temperatures?

What is the Difference Between Annual Inspections for Five-Seater and Seven-Seater Vehicles?