What are the reasons for the air conditioning compressor not working in the Baojun 510?

What materials are needed for a car's first maintenance?

The items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle's driving license; vehicle registration book; vehicle purchase invoice. Bring these to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven. The specific time varies by vehicle, generally after driving 5,000 kilometers or 6 months. It is essential to attend the first maintenance on time, neither early nor late. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard load and normal speed as required by the vehicle. The timing for the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever indicator is met first will be the standard. First maintenance items include: oil change, oil filter replacement, cleaning the air filter, checking various fluid levels for normalcy, inspecting the generator belt, checking for damage to wiper blades, checking tire pressure for normalcy, and inspecting tires for damage or bulges. Time required: Completing all tasks takes approximately 2 hours. The most critical aspects of a new car's first maintenance are changing the oil and oil filter. When changing the oil, the oil filter must also be replaced. The choice of oil must refer to the "Vehicle Use and Maintenance Manual," as different vehicle models require different oil specifications. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It is important to note that the interior of the car body should not be directly washed with water. If the floor mats are dirty, use a vacuum cleaner or take them out to brush and clean with detergent, then dry before putting them back. There are many holes under the rubber mats on the floor of the driver's compartment. If water enters, it will not dry but will flow through the holes to areas like the gearbox, causing erosion and corrosion. The best practice is to vacuum clean and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it is recommended to drain the antifreeze and add the same brand from the beginning. Different brands of antifreeze have significantly different chemical properties and use different corrosion inhibitors. Do not mix them to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function again. Some people apply lubricant to the bolts and nuts to prevent rust, but this can pose a safety risk. At high speeds, the bolts and nuts can loosen or even fall off, leading to driving malfunctions.

10

2

Share

What Causes Abnormal Noise in the Three-Way Catalytic Converter?

Abnormal noise in the three-way catalytic converter is caused by a damaged casing or filter. Below are specific details about the three-way catalytic converter: 1. Function: The three-way catalytic converter is a purification device in the engine. Whether it functions properly determines the engine's fuel consumption, power, emissions, and other operational states. 2. Symptoms of Failure: If it becomes clogged or fails, the vehicle's exhaust emissions will exceed standards, and the engine's performance may be affected. Common symptoms include increased fuel consumption, sluggish acceleration, abnormal noise from the exhaust pipe, and unpleasant exhaust odors. 3. Cleaning Interval: Typically, the three-way catalytic converter should be cleaned every 30,000 kilometers. It is also advisable to clean it before an annual vehicle inspection to ensure passing the emissions test smoothly.

19

2

Share

Where is the sunroof fuse located in the Ford Explorer?

The location of the headlight fuse: The fuse is located in the fuse box in the engine compartment of the vehicle. Here are the detailed explanations: Fuse: Known as a current fuse, it is an electrical component installed in a circuit to ensure the safe operation of the circuit. It is also referred to as a fuse-link, defined by the IEC127 standard as a "fuse-link". Operation method: The fuse tube (or wire) will melt and cut off the current when the current abnormally rises to a certain level and reaches a certain temperature, thereby protecting the safe operation of the circuit.

6

5

Share

Which Button is the Hazard Warning Flasher Switch?

Car hazard warning flasher switch is the red triangle button on the console. Here are precautions for using hazard lights: 1. Driving in fog: Due to poor visibility in foggy conditions, you should not only turn on the hazard lights but also activate the fog lights to alert passing vehicles. 2. Vehicle malfunction: Or when involved in a traffic accident, hazard lights should be turned on to warn other vehicles for safety. On highways, failure to use lights and set warning signs as required after a vehicle breakdown or accident will result in 12 penalty points. 3. Towing a malfunctioning vehicle: Both the towing vehicle and the towed vehicle should turn on hazard warning flashers to indicate abnormal status to passing vehicles. 4. Temporary parking: Turn on hazard lights to alert other vehicles.

2

1

Share

How often should brake pads for sedans be replaced?

Generally, the normal wear lifespan of brake pads is around 60,000 kilometers. Below is some information about brake systems: 1. Brake Pads: Also known as brake linings, they are the most critical safety components in a vehicle's braking system. The effectiveness of all braking performance is decisively influenced by the brake pads; Brake pads are typically composed of a steel plate, an adhesive heat insulation layer, and friction material. The heat insulation layer is made of non-heat-conductive materials to provide thermal insulation; 2. Friction Material: Composed of friction materials and adhesives, it creates friction when pressed against the brake disc or drum during braking, thereby achieving the purpose of decelerating and stopping the vehicle.

20

4

Share

Where is the battery located in a BMW X5?

The battery of the BMW X5 is located on the left side of the engine compartment, and its original battery model is AGM. The battery, also known as a storage battery, is a type of cell that works by converting chemical energy into electrical energy. The BMW X5 is a mid-to-large-sized 5-door, 5-seater SUV with body dimensions of 4930mm in length, 2004mm in width, and 1776mm in height, with a wheelbase of 2975mm and a fuel tank capacity of 83 liters. The BMW X5 is equipped with a 2.0T turbocharged engine, paired with an 8-speed automatic transmission, featuring a double-wishbone independent front suspension and a multi-link independent rear suspension.

5

2

Share

What are the reasons for the air conditioning compressor not working in the Baojun 510?

What materials are needed for a car's first maintenance?

What Causes Abnormal Noise in the Three-Way Catalytic Converter?

Where is the sunroof fuse located in the Ford Explorer?

Which Button is the Hazard Warning Flasher Switch?

How often should brake pads for sedans be replaced?

Where is the battery located in a BMW X5?

Can Vacuum Tires Be Repaired?

How Many Kilometers Can a Car Travel in One Hour?

What is the formal name for brakes?

Where is the Shengkai Tire Manufacturer Located?