What are the reasons for the abnormal noise at low-speed idle in Wuling Hongguang?

1 Answers
DiJeremiah
07/29/25 8:07pm
Wuling Hongguang low-speed idle abnormal noise reasons include: 1. Excessive wear of parts or improper installation and adjustment; 2. Loose connecting parts of the wheels causing abnormal noise; 3. Components being cold and hard with insufficient lubrication; 4. The vehicle being in the running-in period, resulting in mismatched differential planetary gears and half-shaft gears causing abnormal noise. When the vehicle experiences low idle abnormal noise, the owner should pay attention to: 1. Minimize the use of high-power electrical equipment, such as air conditioning cooling, high-power audio, external power supply, etc., as these will increase the burden on the battery and engine; 2. Adjusting idle work must be carried out under normal conditions such as normal engine temperature, appropriate valve clearance, normal ignition system condition, good sealing of all pipelines, fully open choke valve, and throttle valve being able to close tightly. When adjusting, first unscrew the throttle opening adjustment screw to make the engine reach the lowest stable speed.
Was this review help?
4
1
Share
More Forum Discussions

What is the fuel consumption of the Tiggo 8 according to Xiaoxiong Youhao?

Tiggo 8 has a fuel consumption of 8.5L/100km. Below is relevant information about the Tiggo: 1. Body dimensions: The Chery Tiggo 8 is positioned as a mid-size SUV. In terms of body dimensions, it has a length of 4700mm, width of 1860mm, height of 1746mm, and a wheelbase of 2710mm. 2. Exterior design: The Tiggo 8 follows Chery's family design language, but with a more imposing and rugged overall appearance. The honeycomb grille features a wing-shaped design that extends to the sides and connects with the headlight clusters. The LED daytime running lights are cleverly integrated into the side air intakes, further enhancing the sporty and stylish look.
13
5
Share

What does the sawtooth road traffic sign marking mean?

The sawtooth line is called a longitudinal deceleration marking. Below is a detailed introduction to the sawtooth line: Function: The longitudinal deceleration marking for the vehicle lane consists of a series of diamond-shaped dashed lines parallel to the lane boundary. Its main purpose is to create a sense of pressure by visually narrowing the lane, prompting drivers to automatically slow down at locations requiring deceleration, such as curves and slopes. Principle: When vehicles pass through sections with longitudinal deceleration markings, drivers will subjectively perceive the lane as gradually narrowing, leading them to take proactive deceleration measures and proceed slowly. This effectively prevents sudden braking by motor vehicle drivers before approaching the stop line. Occurrence range and forms: Generally, high-speed sawtooth deceleration markings are set up at locations such as under bridges, toll plaza areas, ramp entrances and exits, turns, and slopes. They mainly appear in the forms of single dashed lines, double dashed lines, and triple dashed lines.
2
1
Share

Should Brake Pads Be Replaced at 3mm Thickness?

If the brake pads are only 3mm thick, it is best to replace them immediately. Here are methods to determine whether the brake discs need to be replaced: 1. Listen for sounds: If there are abnormal noises when lightly applying the brakes, the brake pads must be replaced immediately. This is because the wear indicators on both sides of the brake pads are already directly rubbing against the brake discs, indicating that the brake pads have exceeded their limit. 2. Warning light: Typically, the decision to replace the brake discs is based on whether the brake disc warning light on the dashboard is illuminated. Normally, this light is off. When the brake discs are faulty or excessively worn, the light turns on and goes off after repairs. 3. Check the thickness: Most brake disc products have wear indicators, with three small dimples distributed on the disc surface. Use a vernier caliper to measure the depth of these dimples, which is 1.5mm. When the total wear depth on both sides of the brake disc reaches 3mm, it is recommended to replace the brake discs promptly.
14
1
Share

Who to Contact When a Used Car's Transmission Fails?

If purchased from a legitimate trading market, you can approach the dealer who sold you the car to request compensation or a refund. Below is relevant information regarding post-purchase issues with used cars: 1. Solutions for problems with used cars: According to Chinese used car laws, general used cars do not come with a quality guarantee, but it is required to sign a contract during the transaction. The contract should clearly describe any existing issues with the used car, such as if the vehicle has been involved in a major accident or is a repaired vehicle from a significant incident. If the seller conceals the true condition of the vehicle and fails to disclose it in the contract, the buyer can use the contract to resolve the issue through market mediation. If the market does not intervene, you may apply for arbitration or seek legal resolution. Commercial insurance can help recover some losses through policy cancellation. 2. Purchasing channels for used cars: The used car trading market offers the best in-person experience. Online used car platforms provide the widest selection of vehicles. Personal vehicle listings offer the most favorable prices.
14
0
Share

What are the precautions for selling a car?

Below is a relevant introduction to the precautions for selling a car: 1. Do not easily show your documents to others: Before both parties have reached a definite intention to buy or sell, do not easily show the various documents of the vehicle to others. There was a lady who planned to sell her car and went to the used car market to check the prices. Before she even entered the gate, she was surrounded by 'scalpers' holding 'buy cars' signs. After a lot of chatter, the lady took out the relevant documents of the vehicle, which were all taken away by the 'scalpers'. In the end, because the documents were lost, the car was not sold. 2. Complete the procedures as soon as possible: After the transaction is successful, complete the transfer procedures as soon as possible. Never think that everything is fine once the car is sold and the money is received. If the transfer is not done in time, the original owner will bear joint liability in case of a traffic accident. There are many such precedents. For example, a Mr. Wang received a traffic ticket two years after selling his car, which was caused by not urging the buyer to complete the transfer at that time.
7
5
Share

What is the fuel tank capacity of Cadillac in liters?

Cadillac ATS-L has a fuel tank capacity of 62L, while the front-wheel-drive version of Cadillac XT5 has a fuel tank capacity of 73L, and the four-wheel-drive version has a capacity of 82L. Fuel tank capacity (in liters) refers to the size of the fuel tank, measuring a vehicle's ability to carry fuel, which determines the driving range. Introduction to Cadillac models: 1. Cadillac XLR: The Cadillac XLR boasts top-tier handling and power performance, making it a true high-performance supercar. The XLR features a 'keel frame' unique to world-class supercars, with its superior structural rigidity meeting the demanding requirements of supercar driving dynamics. 2. Cadillac XTS: The Cadillac XTS offers two powertrain options (2.0T and 3.6L) across five models, with five exterior colors and two interior color choices. As the first heavyweight model under SAIC-GM's luxury vehicle strategy, the Cadillac XTS innovatively introduces multiple cutting-edge technologies, pioneering the segment and establishing a new American luxury standard in the premium car market through innovative technological experiences.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.