What are the reasons for suddenly being unable to detect in-car Bluetooth?

What kind of engine oil does the Subaru BRZ use?

Subaru BRZ uses fully synthetic engine oil with specifications of 5W30 or 5W40. Engine oil, also known as engine lubricant, serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Taking the 2020 Subaru BRZ as an example, its body dimensions are: length 4240mm, width 1775mm, height 1320mm, with a wheelbase of 2570mm and a minimum ground clearance of 130mm. The 2020 Subaru BRZ is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 147kW and a peak torque of 250Nm, paired with a 6-speed manual transmission.

16

0

Share

What is the battery model for the Magotan key?

The battery model for the Magotan car key is CR2032. The steps to replace the battery in the Magotan car key are: 1. First, pop out the metal head of the key, then hold both sides of the key and pull upwards to separate it into two parts. 2. Use a small screwdriver to separate and remove the button battery from the battery compartment. 3. Replace it with a new battery. Below is more information about the Magotan: 1. The dimensions of the Volkswagen Magotan are 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2812mm. 2. The new Magotan continues to use Volkswagen's most advanced TSI+DSG golden combination, offering consumers three displacement options: 1.4TSI, 1.8TSI, and 2.0TSI.

6

1

Share

How to Fold the Rearview Mirrors on the Volkswagen Lavida?

To fold the rearview mirrors on the Volkswagen Lavida, follow these steps: After entering the car and closing the door, adjust the control knob located on the left side of the door handle to position 0. The Volkswagen Lavida is a compact 4-door, 5-seater sedan with body dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. The drivetrain is front-wheel drive, with a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.

9

5

Share

How Many Lanes Does a Highway Generally Have?

According to the scale of the road, highways are divided into three types: two-way four-lane, two-way six-lane, and two-way eight-lane. The highway surface includes several major parts: the main road, ramps, and auxiliary lanes. Below is a detailed introduction: 1. Main Road: The main road is the carriageway, which is divided from left to right into the overtaking lane, fast lane, and slow lane (travel lane). 2. Ramps: Ramps can be subdivided into interchange ramps, acceleration lanes, deceleration lanes, approach lanes, collector-distributor lanes, and turning ramps. 3. Auxiliary Lanes: Auxiliary lanes include emergency lanes (emergency stopping areas), U-turn lanes, climbing lanes, escape lanes, and cooling pond lanes.

12

1

Share

Can ETC be used immediately after installation on the vehicle?

No. Newly installed ETC devices require activation before they can be used. Here are the precautions for first-time ETC usage: 1. Preload funds for debit cards: For ETC debit cards, a deposit of 200 yuan must be preloaded before use. 2. Pay attention to the ETC transaction sensing area: The ETC transaction sensing range is 8 meters. When there is a vehicle stopped ahead, to avoid issues such as the front vehicle's ETC device malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the front vehicle to prevent automatic sensing and payment for the front vehicle. This is also one of the four situations where the ETC barrier does not lift. 3. Control speed in ETC lanes: The recognition speed in ETC lanes should be below 20 km/h. If the speed is too fast, the vehicle device information cannot be read, resulting in failed fee deduction.

19

5

Share

What to Do When One Side of the Hood Gap is Wider Than the Other?

If one side of the hood gap is wider than the other, you can adjust the rubber adjustment cones on both sides or adjust the hood latch by moving it up and down. The functions of the hood are as follows: 1. Airflow guidance. By guiding the airflow, air resistance can be decomposed into beneficial forces, increasing the front tires' grip on the ground, which helps improve the vehicle's driving stability. 2. Protection for the engine and surrounding pipeline components. By enhancing the hood's strength and structure, it can effectively prevent adverse effects such as impacts, corrosion, rainwater, and electromagnetic interference, ensuring the vehicle's normal operation. 3. Aesthetics. The vehicle's exterior design is a direct reflection of its value. As an important part of the overall appearance, the hood plays a crucial role in enhancing visual appeal and embodying the concept of the entire car.

14

5

Share

What are the reasons for suddenly being unable to detect in-car Bluetooth?

What kind of engine oil does the Subaru BRZ use?

What is the battery model for the Magotan key?

How to Fold the Rearview Mirrors on the Volkswagen Lavida?

How Many Lanes Does a Highway Generally Have?

Can ETC be used immediately after installation on the vehicle?

What to Do When One Side of the Hood Gap is Wider Than the Other?

What is the use of a steering damper?

Differences Between Beijing Benz and Imported Benz

What Causes Steering Wheel Vibration at 100 km/h in Sedans?

Which car series does Mazda belong to?