What are the reasons for severe vibration after vehicle startup?

What Causes Diesel Engine Idle Vibration That Disappears When Accelerating?

When accelerating, the engine's excitation frequency changes significantly, avoiding the natural frequency points of certain components in the drivetrain or vehicle body, thus eliminating vibration. Methods to diagnose idle vibration issues are as follows: 1. Assess the severity of vibration: Oxygen-deprivation-related vibrations typically exhibit large amplitudes. 2. Determine whether the idle vibration is irregular and intermittent. 3. Observe unstable idle RPM during vibration: If the tachometer needle fluctuates during idle, it indicates a problem. A properly functioning engine should exhibit uniform, minimal vibration with smooth operation when maintaining stable idle speed.

1

2

Share

Why Does an Automatic Transmission Car Jerk When Starting?

If you want to accelerate quickly while driving, you need to press the throttle deeply. At this point, the automatic transmission will automatically downshift to increase the engine speed. When the speed reaches a certain level, it will upshift. After upshifting, because the speed will drop significantly, a relatively noticeable jerking sensation will occur. More relevant information is as follows: 1. After starting an automatic transmission vehicle, if you want to drive smoothly, you can lightly press the accelerator pedal at the appropriate time. The transmission will then upshift automatically, resulting in a weaker shifting jerk. 2. If you want to maintain good acceleration performance, you need to press the accelerator pedal deeply. The automatic transmission will upshift to a higher gear at a higher speed, resulting in a more noticeable shifting jerk.

18

0

Share

What are the key points to note for the Subject 3 driving test?

Key points for the Subject 3 driving test are as follows: 1. Pre-test preparation: Walk around the vehicle before getting in, especially pausing near the monitoring area. After entering, fasten the seatbelt first, then adjust the seat and mirrors. 2. Light simulation: Before starting the light simulation test, check if the light switches are reset. Confirm all lights are completely off before requesting to begin the test, especially if the previous candidate failed the light test. If two consecutive voice commands use the same light, no action is needed after the current command; just wait for the next one. 3. Starting off: Always observe the surrounding traffic before starting. After starting, merge into the left lane as soon as possible, straighten the vehicle, accelerate, and shift to second gear. 4. While driving: Keep your eyes on the road ahead, looking as far as possible, while constantly monitoring the vehicle in front to avoid following too closely. 5. Intersections: Before reaching an intersection, if the speed is too high, slow down and shift gears in advance. Simultaneously, turn your head left and right to observe, ensuring the examiner sees these actions. 6. Lane changing: Before changing lanes, signal, check the mirrors, and only turn when it's safe. 7. Gear shifting: Do not press the accelerator and clutch simultaneously as it affects gear shifting smoothness. When shifting gears, fully depress the clutch, use your right hand to shift, and keep your left hand on the steering wheel to avoid veering off course. 8. U-turns: Always use first gear for U-turns and perform them in the leftmost lane. 9. Pulling over: Upon hearing the instruction to pull over, first turn on the right signal, then check if parking is allowed at that spot.

4

Share

Is it acceptable not to affix temporary license plates on the windshield?

It is not permissible to leave temporary license plates unaffixed on the windshield. Additional relevant information is as follows: 1. Temporary license plates must be affixed to the windshield. Failure to adhere to the regulations regarding the placement of temporary plates will result in penalties from traffic police for intentionally obscuring, defacing, or improperly installing motor vehicle license plates, including fines and a deduction of 12 points. 2. There are two temporary license plates: one should be affixed to the lower left or right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view, and the other should be affixed to the lower left corner of the rear windshield inside the vehicle. Temporary plates are region-specific and time-limited, with different plates serving different purposes. If traveling across provinces or cities, it is necessary to apply for a temporary license plate that covers multiple administrative jurisdictions.

20

0

Share

What does Honda Type 2 coolant mean?

TYPE2 is a model of Honda coolant, indicating that this coolant needs to be replaced every two years. Coolant is a liquid containing special additives, mainly used in liquid-cooled engine cooling systems. It has excellent properties such as preventing freezing in winter, boiling in summer, and preventing scale and corrosion throughout the year. Composition of coolant: The main components of coolant are: 50% pure water, 40% methanol, and 10% other substances. Types of coolant: Coolant is generally divided into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. Can different coolants be mixed? It is necessary to use the same brand of coolant. Different brands of coolant may have different production formulas. If mixed, various additives may undergo chemical reactions, causing the additives to fail. How to choose coolant: The basic indicators of coolant are the freezing point and boiling point. The freezing points of coolants on the market include -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose one that is at least 10°C lower than the lowest temperature in your region.

14

1

Share

The Difference Between Two-Box and Three-Box Designs?

The differences between two-box and three-box designs are as follows: 1. Two-Box Cars: Only have an engine compartment and a passenger compartment, without a separate luggage compartment. 2. Three-Box Cars: Have an engine compartment, a passenger compartment, and an independent luggage compartment. 3. In terms of usage: Most two-box cars on the market are shorter than three-box cars, making them more flexible, occupying less space, and easier to reverse. Although three-box cars offer larger cargo space, they consume more fuel accordingly and are less flexible in congested urban traffic conditions compared to two-box cars.

13

1

Share

What are the reasons for severe vibration after vehicle startup?

What Causes Diesel Engine Idle Vibration That Disappears When Accelerating?

Why Does an Automatic Transmission Car Jerk When Starting?

What are the key points to note for the Subject 3 driving test?

Is it acceptable not to affix temporary license plates on the windshield?

What does Honda Type 2 coolant mean?

The Difference Between Two-Box and Three-Box Designs?

How Often Should the Coolant Be Changed in a Honda Car?

How to Remove Wiper Blades?

What does the triangle with an exclamation mark on the car dashboard mean?

Why is the car reversing image mirrored left and right?