What are the reasons for severe engine vibration?

2 Answers
LeoLee
07/24/25 5:40am
If you can clearly feel severe engine vibration in the car, there may be four reasons. Here are the detailed explanations: 1. Carbon deposit issue: Carbon deposits include cylinder carbon deposits, throttle carbon deposits, spark plug carbon deposits, intake carbon deposits, etc. When there is excessive carbon buildup inside the engine, it can affect a series of parameters and even lead to unstable power output, causing vibration during idling and acceleration. 2. Engine mount aging or loosening: Engine mounts are rubber blocks placed between the engine and the frame to reduce vibrations during engine operation and secure the engine. Once these mounts age or become loose, engine vibration will become abnormally severe. 3. Engine misfire: This occurs when some cylinders in the engine are not functioning properly, usually manifested as: intermittent exhaust gas flow from the car, severe shaking of the exhaust pipe, and noticeable vibration of the engine and body. This is mostly caused by faulty ignition coils or spark plugs. 4. Fuel system malfunction: Using an incompatible fuel grade (e.g., using 92 instead of 95) can cause severe engine vibration.
Was this review help?
5
3
Share
DelJesse
08/11/25 1:19am
I've found that when my car's engine shakes violently, it's often related to the ignition system: aging spark plugs or faulty ignition coils causing uneven combustion, clogged fuel injectors making some cylinders work abnormally, and a dirty air filter restricting air intake, leading to incomplete combustion. Additionally, loose engine mounts can amplify vibrations, and malfunctioning sensors like the oxygen sensor can cause the computer control to become unbalanced. Ignoring these issues not only increases fuel consumption but may also damage the engine over time, potentially leading to major repairs. Regular maintenance can prevent these problems, such as replacing spark plugs every 20,000 kilometers, cleaning the fuel system, and keeping the intake system unobstructed.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

Why Should a New Battery Be Fully Discharged for the First Time?

For electric vehicles, it is not necessary to fully discharge a new battery for the first time. The maintenance methods for batteries are introduced as follows: 1. Batteries should not be charged at any time: Lead-acid batteries are not lithium batteries and cannot be charged immediately after use. The lifespan of a lead-acid battery is calculated based on the number of charge and discharge cycles. The battery is most afraid of being depleted, and keeping it fully charged can extend its lifespan. 2. During charging: The charger's indicator light turns red first and then green. After the light turns green, it is recommended to maintain a float charge for 2 hours, which helps inhibit battery sulfation. 3. Prevent overcharging the battery: Overcharging generates a large amount of gas that scours the plates, accelerating the shedding of active material from the plates and shortening the battery's lifespan. Overcharging also accelerates water loss, leading to drying of the electrolyte, an increase in battery temperature, thermal runaway, plate expansion, and casing deformation. 4. Prevent over-discharging the battery: Long-term deep discharge can cause softening of the battery plates, reducing their service life. Avoid high-current discharge; when starting, climbing hills, or driving against the wind, try to use pedal assistance. Avoid prolonged discharge and do not frequently drive until the battery is fully depleted. Charge the battery when its capacity drops by half.
1
5
Share

Is Parking on a Slope Harmful to the Car?

Parking on a slope definitely causes some harm to the car. When parked on a slope, the car is subjected to the component of its own weight along the slope, and this force is mainly borne by the handbrake. The handbrake cable, being in a taut state for a long time, will gradually stretch, and the suspension will bear pressure. This reduces the reliability of the handbrake, making issues like the car not staying parked and rolling backward increasingly apparent. Impact on the suspension: When parking on a slope, the side facing downhill bears greater pressure on the suspension. Over time, this causes uneven aging and varying stiffness between the front and rear suspensions, affecting ride comfort. Damage to the handbrake braking system: Parking the car on a slope means the handbrake has to bear the pressure. The handbrake fixes the vehicle by pulling the brake via a cable. When parked on a slope, the handbrake cable continuously bears the component of the car's weight parallel to the slope. Prolonged exposure to this stress can fatigue the handbrake cable, affecting its performance. Risk of rolling: If parked on a slope for an extended period, the handbrake may age and fail at any time, leading to the possibility of the car rolling away.
6
5
Share

Is a Car with Cut Rear Fender Considered an Accident Vehicle?

A car with a cut and replaced rear fender is considered a major accident vehicle. If the rear fender has undergone cutting and replacement, it falls under the category of an accident vehicle. However, if it only underwent panel beating repairs without any cutting or welding, it is not classified as an accident vehicle. Introduction to Accident Vehicles: An accident vehicle refers to a car that has suffered damage due to non-natural wear and tear, leading to a decline in mechanical performance and economic value. Generally, these are vehicles with structural damage, where the performance is inferior to its original state. An accident inherently indicates issues with the car, and driving such a vehicle may pose safety hazards. Accident Vehicle Inspection: Methods include exterior inspection, light inspection, insurance record check, and interior examination. When purchasing a used car, it is essential to carefully observe aspects such as the manufacturing date, actual mileage, whether the car has been involved in any major accidents, and the level of daily maintenance provided by the previous owner.
11
5
Share

How to Apply for a Ride-hailing Vehicle Operating License?

There are generally two channels to apply for a ride-hailing vehicle operating license: one is to go to the local vehicle management office or traffic police department, and the other is to apply online. To apply at the local vehicle management office or traffic police department, you need to prepare the required materials in advance and then proceed with the staff. The materials to be prepared include: 1. For vehicles owned by a legal entity: business license, identity proof of the handling person and its copy should be provided. 2. For ride-hailing vehicles: application form for the transport certificate. 3. Original vehicle license and its copy: for newly purchased vehicles, the purchase invoice and original vehicle registration certificate and its copy should be provided. 4. Comprehensive performance test report of the vehicle: qualified report. 5. Ride-hailing platform company: letter of intent for service agreement.
7
5
Share

What are the conditions for returning or exchanging a car?

According to the Automobile Three Guarantees Law, the conditions for returning or exchanging a car are as follows: 1. The vehicle has undergone two repairs for serious safety performance failures: If the serious safety performance failure has not been resolved or a new serious safety performance failure occurs. 2. After the engine or transmission has been replaced twice: Or if the same major component of the engine or transmission has been replaced twice due to quality issues and still cannot function properly. The replacement counts for the engine, transmission, and their major components are not duplicated. 3. Steering system, braking system: Or if the same major component of the suspension system, front/rear axle, or body has been replaced twice due to quality issues and still cannot function properly.
10
1
Share

How Often Should the Final Drive Oil Be Changed?

The final drive oil can be changed every 80,000 to 100,000 kilometers. For specific models, please refer to the maintenance manual. Here is an introduction to the final drive oil: 1. Introduction to Final Drive Oil: The final drive is actually the part connecting the two rear wheels of a car. The correct technical term for the final drive is the final reduction ratio gear. Final drive oil is the oil injected into those gears. Final drive oil is just a customary term; in layman's terms, it is actually gear oil, also known as differential oil. 2. Functions of Final Drive Oil: Final drive oil is used in various gear transmission devices to prevent tooth surface wear, scratches, sintering, etc., thereby extending their service life and improving power transmission efficiency. Gear oil should have good anti-wear and load-bearing properties, as well as appropriate viscosity. Final drive oil should also have good thermal oxidation stability, anti-foaming properties, water separation performance, and rust prevention properties. Since gear loads are generally above 490 MPa, and the load on hypoid gear surfaces can reach as high as 2,942 MPa, extreme pressure anti-wear agents are often added to gear oil to prevent oil film rupture, which can cause tooth surface wear and scratches. Sulfur-phosphorus or sulfur-phosphorus-nitrogen additives are commonly used. The working temperature of gear oil is generally lower than that of internal combustion engine oil and largely varies with environmental temperature changes. The oil temperature of vehicle gear oil generally does not exceed 100 degrees Celsius.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.