···
Log in / Register

What are the reasons for pressing the dotted line during parallel parking?

1 Answers
TaylorAnn
07/24/25 10:29am

When reversing into the parking space, the speed is slightly too fast, the car body is not properly aligned, the rear wheels have already pressed against the rear line of the car body, or the car body has touched the line. Precautions: 1. When reversing, look at the right rearview mirror. When line 1 disappears from the right rearview mirror, turn the steering wheel fully to the right while driving slowly and look at the left rearview mirror. 2. When the intersection of lines 3 and 4 appears in the left rearview mirror, turn the steering wheel two circles to the left while driving slowly, and continue to observe the left rearview mirror. 3. Before reversing into the parking space, ensure that the car body is about 30 centimeters away from the right line. When reversing into the parking space, as soon as the right rearview mirror covers the right angle edge, immediately turn the steering wheel fully. When you see the right angle edge at the rear of the car body, straighten the steering wheel. When the left rear wheel is about to enter the parking space, immediately lock the steering wheel and slightly reverse to adjust the car body. At this point, the left side line is basically parallel, and the rear of the car is parked just in front of the side line at the appropriate position.

Was this review help?
15
0
Share
More Forum Discussions

How to reset the tire pressure warning light on Trumpchi GM8?

Long press the tire pressure reset button to clear the tire pressure warning light on the dashboard. Tire pressure reset is an operation to reset the tire pressure monitoring system after resolving tire pressure issues. Tire pressure reset method for Trumpchi GM8: First, turn on the ignition switch, then long press the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and may lead to veering, posing risks to driving safety; Increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; Reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout; Increases tire body deformation, making the tire side prone to cracks, and generates flexing movements, leading to excessive heat, accelerating rubber aging, fatigue of the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating wear at the tire shoulders.
20
1
Share

What is the highway range of the Tesla Model 3?

Tesla Model 3 has a highway range of 245km. The driving range, also known as endurance capability, refers to the total distance a vehicle or ship can travel continuously with maximum fuel reserves. For electric vehicles, the driving range refers to the distance traveled from a fully charged state of the power battery to the end of the test under standard conditions. Taking the 2021 Tesla Model 3 as an example, its body dimensions are: 4694mm in length, 1850mm in width, and 1443mm in height, with a wheelbase of 2875mm and a trunk capacity of 425 liters. The 2021 Tesla Model 3 features a double-wishbone independent front suspension and a multi-link independent rear suspension.
12
3
Share

What Level is Tesla's Autonomous Driving?

Tesla's autonomous driving technology is classified as Level 2. Level 2 autonomous driving is not fully autonomous and requires the driver to remain attentive. Below is an introduction to the levels of autonomous driving technology: 1. Level 0: No automation. The driver must constantly control all mechanical and physical functions of the vehicle, with only alarms as assistance. 2. Level 1: The driver operates the vehicle, but certain individual systems can sometimes assist, such as Electronic Stability Program (ESP) or Anti-lock Braking System (ABS), which help enhance driving safety. 3. Level 2: The driver primarily controls the vehicle, but the system provides partial automation to significantly reduce the operational burden. Examples include Adaptive Cruise Control (ACC) combined with automatic following and lane departure warning, as well as Automatic Emergency Braking (AEB), which integrates technologies like blind-spot detection and collision avoidance systems. 4. Level 3: The driver must be ready to take control at any time. During autonomous driving assistance, such as when following a vehicle, the driver may temporarily be exempt from operation. However, when the vehicle detects a situation requiring driver intervention, it will immediately return control to the driver, who must take over to handle scenarios beyond the system's capability.
19
5
Share

Where is the tire pressure reset button on the Volkswagen CC?

The tire pressure reset button on the Volkswagen CC is located on the dashboard center console, in front of the gear lever, marked with a capital SET. The tire pressure reset is an operation to reset the tire pressure monitoring system after the tire pressure fault has been resolved. Tire pressure reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "beep" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally, the dashboard warning light will turn off, indicating the tire pressure reset is complete. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Generally, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed in time, the tire pressure monitoring system will still record the original data, causing the tire pressure monitoring indicator light to turn on. In this case, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only replacement with a new part is possible.
5
3
Share

What is the solution for the Citroen C-Quatre engine warning light coming on?

If the engine warning light of a Citroen C-Quatre comes on, you can follow these steps to address the issue: First, check if the engine is running normally and whether there are issues such as shaking or black smoke. If any of these problems exist, avoid starting the engine again. Specifically, if the red light is on, do not start the engine under any circumstances. If the engine can be started, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once, or without depressing the clutch, turn the car key halfway to the 'on' position. The car will perform a self-check after powering on. Wait for 5-10 seconds and observe whether the warning light on the dashboard turns off. If the warning light remains on, visit a service center as soon as possible to identify the cause. The service center can use a portable diagnostic tool to read the fault code, obtain fault information, and perform targeted repairs. The engine warning light resembles a water tap icon and comes in two colors: yellow and red. A yellow light indicates a warning, while a red light signifies a prohibition. When the yellow warning light is on, it means certain system parameters of the car may have exceeded the set range. The car can still be driven, but some functions may be limited. When the red warning light is on, the car must be stopped immediately, the engine turned off, and driving must not continue. The fault must be checked. Common causes for the engine warning light to come on include: sensor failure, oil quality issues, poor fuel mixture combustion, turbocharging problems, intake issues, exhaust problems, and anti-theft system failures.
12
4
Share

What Causes the Dashboard Warning Light to Illuminate in the 10th Generation Civic?

The dashboard warning light in the 10th Generation Civic may illuminate due to: 1. Installation of aftermarket accessories; 2. Malfunction in critical components of the engine, transmission, or ABS system. Taking the 2021 Civic as an example, it belongs to the compact car category with body dimensions of 4517mm in length, 1799mm in width, 1434mm in height, and a wheelbase of 2700mm. It features a 47-liter fuel tank capacity and a curb weight of 1343kg. The 2021 Civic is equipped with a MacPherson strut front suspension and a multi-link rear suspension. It is powered by a 1.5L turbocharged engine delivering 177PS maximum horsepower, 130kW maximum power, and 220Nm maximum torque, paired with a continuously variable transmission (CVT).
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.