What are the reasons for poor cooling performance of the parking air conditioner?

1 Answers
EverettFitz
07/30/25 4:53am
Here are the specific reasons for the poor cooling performance of the parking air conditioner: 1. Insufficient or low refrigerant: This may be caused by a minor refrigerant leak. You can observe it through the sight glass on the dryer tank. During normal operation of the air conditioner, if continuous bubbles appear in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it indicates a severe refrigerant shortage. In this case, simply adding refrigerant will solve the problem. 2. Loose drive belt of the car air conditioner compressor: If the drive belt is loose, the compressor will slip during operation, leading to reduced transmission efficiency and a drop in compressor speed. This results in decreased refrigerant compression and delivery, causing the car air conditioner to fail to cool. If the compressor drive belt is too loose, it should be tightened. If it cannot be turned by hand, the belt is too tight and should be slightly loosened. If tightening is ineffective or the belt shows cracks, aging, or other damage, a new drive belt should be replaced.
Was this review help?
18
2
Share
More Forum Discussions

How to Determine When a Car Battery Needs Replacement

Methods to determine when a car battery needs replacement: 1. The car battery shows obvious swelling, deformation, or bulging; 2. The car is particularly difficult to start, and charging has no effect, indicating the battery life is exhausted; 3. Check the observation hole of the car battery—the normal state is green. If it is any other color, it means the battery life has expired. If the battery is well-maintained and good usage habits are followed, the battery life can be extended to some extent. When the electrolyte inside the battery is insufficient, it will cause the battery to lose charge, requiring timely refilling. After turning off the car, ensure all lights and electrical devices are switched off to avoid excessive battery drain leading to power loss. If the car is parked for an extended period, it is recommended to disconnect the battery's negative terminal to cut off power, which can prevent power loss.
16
5
Share

What does it mean when the EPC light is on in the car?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other circumstances. The power-on self-test is a pre-driving check of all vehicle sensors. Typically, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. If the EPC light remains on after starting the vehicle or illuminates under other conditions, the possible causes include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light illuminating under other circumstances: Engine intake system fault: The EPC light will activate if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect intake, triggering the indicator light. Fuel system fault: Issues such as substandard fuel, deteriorated fuel, or poor fuel atomization can cause the light to illuminate. Engine fault: Insufficient engine pressure or problems with components like the intake valves can also prompt the EPC light. ECU control unit fault: Interference with the vehicle's computer signals or false alarms from the computer may trigger the light. Brake light fault: Malfunctions like non-functioning brake lights, faulty brake switches, or brake circuit issues can cause the EPC light to illuminate. Solutions for when the EPC light is on: Troubleshoot intake system issues, use fuel with the appropriate octane rating, and clean the throttle body. Remove carbon deposits from relevant components. Re-flash the ECU with updated data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains illuminated. If it does not, the issue may have been a temporary glitch. If the light stays on or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data deviates from normal values, the EPC system takes predefined actions to regulate the powertrain. Common EPC indicator lights come in two colors: yellow and red. A yellow EPC fault light indicates that the vehicle can still be driven, but it should be taken to a repair facility at a reduced speed. A red EPC fault light signifies a more serious issue, and the driver should pull over immediately and contact a repair professional. Continuing to drive with a red EPC light can damage core components or compromise safety.
15
3
Share

Which region does the license plate starting with Chuan K belong to?

License plates starting with Chuan K belong to Neijiang City in Sichuan Province. The license plate codes for various regions in Sichuan Province are as follows: Chuan A - Chengdu, Chuan B - Mianyang, Chuan C - Zigong, Chuan D - Panzhihua, Chuan E - Luzhou, Chuan F - Deyang, Chuan G - Chengdu (supplementary), Chuan H - Guangyuan, Chuan J - Suining, Chuan K - Neijiang, Chuan L - Leshan, Chuan M - Ziyang, Chuan Q - Yibin, Chuan R - Nanchong, Chuan S - Dazhou, Chuan T - Ya'an, Chuan U - Aba Tibetan and Qiang Autonomous Prefecture, Chuan V - Ganzi Tibetan Autonomous Prefecture, Chuan W - Liangshan Yi Autonomous Prefecture, Chuan X - Guang'an, Chuan Y - Bazhong, Chuan Z - Meishan. Sichuan, abbreviated as Chuan or Shu, is one of China's 23 provinces, with its capital in Chengdu. It is located inland in the southwestern region of China, bordering Chongqing to the east, Yunnan and Guizhou to the south, Tibet to the west, and Shaanxi, Gansu, and Qinghai to the north.
15
4
Share

What is the difference between twin-turbo and single-turbo?

The differences between single-turbo and twin-turbo are as follows: A single turbocharger struggles to achieve optimal performance. A small turbo responds quickly but has poor boost effects, while a large turbo provides good boost but suffers from noticeable turbo lag. Twin-turbo systems generally come in two forms: two small turbos in parallel, such as in BMW engines, where each turbo is responsible for boosting half of the cylinders, or a combination of one large and one small turbo in series, where the small turbo provides quick response at low speeds and the large turbo delivers significant boost at high speeds. There is also another type of forced induction system, which pairs a supercharger with a turbocharger. A typical example is the TSI engine used abroad (domestic versions only have a single turbo). The supercharger responds quickly but cannot achieve high rotational speeds, resulting in less effective boost compared to a turbocharger, which responds more slowly but performs better at high speeds. In summary, using a twin-turbo system combines the benefits of both small and large single turbos: it offers the quick low-speed response of a small turbo to minimize turbo lag while also providing sufficient high-speed boost like a large turbo, maximizing the turbo's effectiveness. Turbocharging technology uses a turbine to drive a compressor, allowing the engine to intake more air per unit of time. This enables more fuel to be injected into the cylinders for combustion, resulting in stronger power output. The most common type we encounter in daily life is single-turbocharging, which is affordable but suffers from "turbo lag." Especially when driving at low speeds, the exhaust gas may not be sufficient to drive the turbine and compressor, making the vehicle feel sluggish. However, some higher-end models may feature a single-turbo twin-scroll system, which is similar to a regular turbocharger but includes an additional exhaust channel to reduce turbo lag. Twin-turbo systems exist to compensate for the drawbacks of single-turbo lag. They use two independent turbochargers. The engine speed at which turbocharging engages depends on many factors, but the most significant influence is the inertia of the turbine wheel. A small-inertia turbine wheel lowers the engagement speed, meaning the turbo can be driven even at low vehicle speeds. At high speeds, the large-inertia turbo engages to ensure strong power output. This coordination between small and large-inertia turbos allows the engine to deliver superior performance. Besides twin-turbos with different inertia levels, there are also hybrid systems combining a supercharger and a turbocharger.
13
4
Share

Which region does the license plate 'Yu U' belong to?

Yu U is the license plate code for Jiyuan in Henan Province. The license plate codes for various regions in Henan Province are as follows: Yu A for Zhengzhou, Yu B for Kaifeng, Yu C for Luoyang, Yu D for Pingdingshan, Yu E for Anyang, Yu F for Hebi, Yu G for Xinxiang, Yu H for Jiaozuo, Yu J for Puyang, Yu K for Xuchang, Yu L for Luohe, Yu M for Sanmenxia, Yu N for Shangqiu, Yu P for Zhoukou, Yu Q for Zhumadian, Yu R for Nanyang, Yu S for Xinyang, and Yu U for Jiyuan. License plates, commonly known as car plates, refer to the plates hung on the front and rear of vehicles. They are typically made of aluminum, iron, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information. The license plate number serves as the identity of the vehicle, much like an ID number does for a person.
9
1
Share

What vehicles can be driven with an A3 driver's license?

An A3 driver's license allows you to drive buses and also covers the vehicle types permitted under a C1 license, such as small cars, small automatic transmission vehicles, low-speed trucks, and three-wheeled vehicles. Although buses exceed six meters in length and carry more than 20 passengers, they are not equivalent to large passenger vehicles like tourist buses. Therefore, holding only an A3 license does not permit you to drive large buses. An A1 license, however, allows you to drive both large buses and regular buses. Requirements for obtaining an A3 driver's license: 1. Age between 21 and 50 years old; 2. Height of at least 155 cm, naked or corrected vision of 5.0 or above, no red-green color blindness, and the ability to distinguish the direction of sound sources from a tuning fork 50 cm away with each ear; 3. Both thumbs must be intact, and each hand must have three other fingers intact with normal movement; 4. Normal movement of the torso and neck; normal movement of the lower limbs with a length difference of no more than 5 cm between the two legs.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.