What are the reasons for oil burning in the 2015 Haval H9?

1 Answers
ZacharyFitz
07/29/25 9:17pm
Here are the reasons for oil burning in the 2015 Haval H9: Poor fuel quality: The primary cause of oil burning in vehicles is poor fuel quality. When fuel does not burn completely, it generates a large amount of carbon deposits. Over time, these deposits accumulate and thicken, with some entering the piston, causing piston ring sticking and clogging the oil return holes. This creates gaps in the engine, allowing oil to enter the combustion chamber and burn, resulting in oil burning. Incomplete fuel combustion: Due to traffic congestion, especially for city-driving vehicles that frequently stop and start, fuel does not burn efficiently, leading to significant carbon deposits. These deposits block the oil return holes, preventing the oil scraper ring from removing oil from the cylinder walls. As a result, the oil remains in the combustion chamber and burns, causing oil burning.
Was this review help?
4
0
Share
More Forum Discussions

How to Turn Off the Trunk Light of the Ford Everest?

The trunk light switch is integrated with the trunk switch, which can be considered as a sensing device, usually located near the latch slot of the trunk door. When the door is closed, it will trigger this sensing device, and the trunk light will turn off accordingly. Therefore, to turn off the trunk light, simply close the trunk. Additional relevant information is as follows: 1. If the trunk light remains on after closing the trunk door, it is likely due to an abnormal sensing device, which requires professional attention. Of course, it may also be caused by poor contact, preventing the trunk light's sensing device from being fully triggered when the door is closed. In this case, try adjusting the sensing device to see if the issue can be resolved. 2. In terms of appearance, the front design of the Ford Everest features large-area chrome decorations, a sharply contoured bumper, and an oversized inverted trapezoidal grille. The body continues the style of American muscle cars, exuding a rugged appeal. The Ford Everest perfectly blends the fashionable aesthetics of urban SUVs with the simple yet bold dominance of rugged SUVs. In terms of dimensions, the Everest measures 4892/1862/1837mm in length, width, and height, with a wheelbase of 2850mm. Due to the ladder-frame chassis of the body-on-frame structure, the Everest has a noticeable height. At the same time, it also boasts a ground clearance of 227mm and a wading depth of 800mm, which are outstanding in its class.
5
2
Share

What Are the Causes of Engine Stalling and Shaking at Idle Speed?

The causes of engine stalling and shaking at idle speed are: 1. Dirty throttle body; 2. Excessive carbon buildup in fuel injectors; 3. Faulty engine mounts; 4. Aging engine components; 5. Ignition system issues. Solutions for engine stalling and shaking at idle speed: 1. Clean the throttle body; 2. Clean the fuel system; 3. Remove carbon deposits from the engine and fuel injectors; 4. Check if spark plugs have excessive carbon buildup and replace them if necessary; 5. Replace aged components. Idle speed refers to the engine running without load, overcoming internal friction resistance without delivering power output, maintaining the minimum stable operating RPM.
16
1
Share

What is the method for cleaning the exterior of a car radiator?

The method for cleaning the exterior of a car radiator is: 1. Remove the bumper; 2. Adjust the water gun nozzle to a spray pattern and set the pressure to an appropriate level, then rinse the dirty radiator surface. The function of the car radiator is: when the engine's water temperature is high, the water pump repeatedly circulates to lower the engine's temperature, thereby protecting the engine. In winter, when the water temperature is low, the water circulation stops to prevent the engine from cooling down. The components of a car radiator include: 1. Radiator core; 2. Water pipes; 3. Cooling air fins; 4. Upper water tank; 5. Lower water tank.
19
1
Share

What to Do When Running Out of Gas Midway?

Solutions for running out of gas midway: 1. If you run out of gas on the highway, pull over to the side, turn on the hazard lights, place a warning sign 150 meters behind the vehicle, and call the highway traffic assistance hotline to explain the situation clearly. 2. Use alcohol as an emergency measure. 3. Add water to the engine. Gas is the fuel for cars, providing the necessary power. Electric vehicles, on the other hand, do not require gas but need charging, as electricity is their power source. The functions of gas are: 1. Gas serves as fuel, supplying power to the vehicle. 2. Gas in the fuel tank also lubricates and cools, ensuring the fuel pump operates normally.
13
2
Share

What is the reason for the fan running continuously when the water temperature is not high?

The reasons for the fan running continuously when the water temperature is not high are: 1. Failure of the cooling fan assembly or the cooling fan circuit; 2. The impeller of the engine water pump is detached from the shaft or the water pump is damaged; 3. Faulty water temperature sensor. Solutions for the fan running continuously when the water temperature is not high: 1. Inspect the fan circuit; 2. Replace the water pump and water temperature sensor. Reasons for the engine water temperature rising include: 1. Leakage in the cooling system or insufficient coolant; 2. Malfunction of the water temperature gauge; 3. Excessive scale in the cooling system, leading to poor heat dissipation; 4. Loose or broken water pump or fan belt; 5. The engine operating under prolonged overload conditions.
8
3
Share

What Does the Triangle Exclamation Mark in BMW 3 Series Mean?

A triangle with an exclamation mark indicates a malfunction in the vehicle's general performance, components, or functions. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in cars. Besides the triangle exclamation mark, there are four other forms: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning light, signaling a transmission malfunction or low transmission fluid. The transmission fluid should be replaced promptly. Brake System Fault: A red circle with parentheses and an exclamation mark in the middle represents a brake system warning, indicating either a brake system malfunction or low brake fluid. Immediate inspection of the brake system is necessary to avoid accidents. Tire Pressure Anomaly: A yellow bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.