What are the reasons for not being able to smell the fragrance in the Mercedes-Benz fragrance system?

What Causes Vehicle Shaking When Braking?

The reason for vehicle shaking when braking is: uneven wear between the brake disc and brake pads, or serrated wear on the brake disc, which causes resonance transmitted to the steering wheel through the steering gear. Methods to determine if brake pads need replacement are: 1. Normal brake pad thickness is about 10mm, and they should be replaced if below 6mm; 2. Check if there are abnormal noises when braking; 3. When brake pads are severely worn, braking efficiency decreases, and symptoms of weak braking may appear. Brake pad replacement steps: 1. Open the engine compartment to check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the caliper bolts and take out the brake pads; 4. Install new brake pads, tighten the guide bolts, and complete the replacement.

1

3

Share

How long after drinking a small sip of red wine can you drive?

You should wait 3 hours after drinking a small sip of red wine before driving. Alcohol breakdown rate: One glass of red wine is 2 liang, which is 100 milliliters. With an alcohol content of 12-14%, the driver's blood alcohol concentration would be approximately 22-27mg/100ml. Since the average adult metabolizes alcohol at a rate of 10-15 milliliters per hour, it would take about three hours to completely metabolize one glass of red wine. Metabolism rate: However, this number isn't absolute as alcohol metabolism speed in the human body depends on various factors. Each person's alcohol metabolism rate differs, and even the same individual may have different metabolism rates at different times or in different environments.

6

5

Share

What are the precautions for long-distance highway driving?

Precautions for long-distance highway driving are: 1. The driver and front-seat passenger should fasten their seat belts, and the driver should not answer phone calls; 2. Avoid sudden steering wheel movements while driving at high speeds; 3. Do not change lanes arbitrarily while driving. When changing lanes or overtaking the vehicle ahead, the turn signal must be activated in advance; 4. Only use adjacent lanes when overtaking, and immediately return to the driving lane after overtaking. Vehicles should not ride or drive on the lane dividing line; 5. Do not reverse, drive in the opposite direction, cross the central divider to make a U-turn or turn, conduct test drives or drive training vehicles, or overtake or park on ramps; 6. Maintain a following distance of at least 100 meters. When the speed is below 100 km/h, the distance from the vehicle ahead in the same lane can be appropriately reduced, but the minimum distance should not be less than 50 meters.

18

5

Share

What do L and S gears mean?

L gear stands for low gear, and S gear stands for sport mode. When the vehicle is in L gear, the transmission will switch between low gears 1 and 2. The functions of S gear are: 1. In this mode, the vehicle's power performance is stronger, often used for overtaking, uphill driving, long downhill driving, traffic jams, and clearing carbon deposits; 2. The transmission can shift freely. An automatic transmission vehicle means that the driver does not need to shift gears manually; the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. The gears of an automatic transmission vehicle include: 1. P gear for parking; 2. R gear for reverse; 3. N gear for neutral; 4. D gear for drive; 5. M gear for manual mode; 6. L gear for low gear; 7. S gear for sport mode.

13

0

Share

What is the ground clearance of the Envision?

The ground clearance of the Envision is 173mm. Taking the 2021 Envision as an example, its body dimensions are: length 4694mm, width 1839mm, height 1686mm, wheelbase 2750mm, front track 1584mm, rear track 1588mm, fuel tank capacity 66 liters, and curb weight 1610kg. The 2021 Envision features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169PS, maximum power of 124kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission. In terms of interior configuration, the steering wheel is made of plastic and offers manual height adjustment and telescopic adjustment.

19

3

Share

What is the difference between Mobil EP and Mobil 1?

Mobil EP and Mobil 1 differ only in their release time. Function of Mobil 1: Mobil 1 is a fully synthetic engine oil. Fully synthetic engine oil is a high-grade lubricant among engine oils. It is suitable for various modern vehicles, especially recommended for high-performance turbocharged, supercharged, multi-valve fuel-injected gasoline cars, multi-purpose sports cars, etc. It is suitable for extreme driving under sustained high pressure, frequent stop-and-go driving in harsh road conditions, and highway driving on smooth roads. Other models: Mobilux Grease EP0 and EP1 have good low-temperature pumpability, making them suitable for centralized lubrication systems and other applications requiring low-temperature performance. Mobilux Grease EP2 is recommended for multi-purpose lubrication of anti-friction bearings and plain bearings, bushings, and pins under normal working conditions.

8

0

Share

What are the reasons for not being able to smell the fragrance in the Mercedes-Benz fragrance system?

What Causes Vehicle Shaking When Braking?

How long after drinking a small sip of red wine can you drive?

What are the precautions for long-distance highway driving?

What do L and S gears mean?

What is the ground clearance of the Envision?

What is the difference between Mobil EP and Mobil 1?

What are the differences between the Volkswagen Lamando and the Velite 6?

Which type of engine oil is better for Baojun 530?

What are the reasons for a car burning out ignition coils?

How to Turn Off the Rear Wiper on a Changan Ford Focus?