What Are the Reasons for No Response When Starting the Car?

How to reset the tire pressure monitoring indicator on the Magotan?

The Magotan has a tire pressure reset switch located on the side of the gear lever. With the ignition switch turned on, pressing this button will reset the tire pressure monitoring indicator. Below are the specific details about the Magotan's tire pressure monitoring system: 1. The tire pressure monitoring system utilizes the ABS sensor function to compare the rotation counts of the tires. Insufficient tire pressure shortens the tire circumference, causing it to rotate differently from other tires during driving. 2. The Magotan's tire pressure monitoring alerts based on wheel speed sensor comparisons. Tire pressure display can be checked using a pressure gauge. While driving, the system monitors tire inflation pressure. If the inflation pressure in one tire is significantly lower than others, the system will alert. When tire pressure decreases, the wheel's effective radius changes, altering its rotation speed. 3. To obtain accurate tire fault information, the system requires tires to have appropriate initial pressure. Initialization must be performed after each tire pressure correction, tire or wheel replacement, and when towing a trailer or after towing.

17

2

Share

What is the tire model used in the Volkswagen Santana?

The Volkswagen Santana comes with original 185/60R15 specification tires from the Hankook KINERGY series. More details about the tires are as follows: 1. These tires focus on economy, featuring fuel-saving and wear-resistant characteristics. The disadvantages are road noise, and relatively weaker handling and comfort. The price is approximately 350 yuan per tire. 2. Do not arbitrarily change the tire model configured by the original manufacturer for the vehicle, including the tire width and aspect ratio. For example, the tire model 185/60/R15 refers to a tire width of 185, an aspect ratio of 60 (commonly referred to as thickness), and R15 indicates the diameter of the wheel rim (drum). The tire model configured by the manufacturer for a vehicle is the result of tens of thousands of tests, so do not change it casually. 3. Without changing the tire model, the choice of tires can be made based on personal lifestyle and preferences. Quietness, fuel efficiency, comfort, etc., may all be factors influencing the user's tire purchase decision.

18

4

Share

Which is Better: Wet or Dry Dual Clutch?

Dry dual clutch and wet dual clutch have similarities as well as differences. Of course, it's not to say that one is better than the other, as each has its own advantages and disadvantages. Below are the differences between the two: 1. Dual clutch transmissions are divided into dry dual clutch transmissions and wet dual clutch transmissions. Whether dry or wet, the transmission principles are basically the same, with two clutches taking turns to work. 2. However, the connection medium between the clutch's driving plate and driven plate differs. The dry dual clutch relies on air. The clutch plates of a dry dual clutch directly contact the engine flywheel. Due to poor heat dissipation, dry dual clutches are prone to high temperatures in congested urban areas, even risking clutch plate burning. In this regard, wet dual clutch transmission technology is more mature. 3. The wet dual clutch relies on oil. Wet dual clutch plates are immersed in transmission oil. In terms of technological maturity and reliability, wet dual clutches are more stable because the clutch plates operate in hydraulic oil, which provides some cooling effect. Wet dual clutches have a more complex structure and higher manufacturing costs, and their power transmission efficiency is not as high as that of dry dual clutches.

13

0

Share

How to Install an ETC Device?

ETC device installation process is as follows: Upon receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly illuminate. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is properly inserted into the OBU device. ETC installation positions: For small vehicles such as cars and minivans, the ETC card and OBU device should be installed in the upper middle section of the front windshield. For large vehicles like trucks and buses, the installation position is in the lower middle section. ETC installation requirements: height should be no less than 1.2 meters and no higher than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).

5

1

Share

What are the causes of unstable idle speed?

Reasons for unstable idle speed in cars: 1. Intake manifold leakage: When unauthorized air, gasoline vapor, or exhaust gases enter the intake manifold, causing the air-fuel mixture to become too rich or too lean, leading to unstable idle speed. 2. Excessive carbon buildup in the throttle body: Too much carbon deposit in the throttle body and surrounding intake passages changes the cross-sectional area of the air passage, making it impossible for the control unit to precisely regulate idle air intake. This also results in an overly rich or lean mixture, causing unstable idle speed. 3. Faulty intake system components: There are many actuators in the engine's intake system, such as throttle motor, idle speed control stepper motor, duty cycle solenoid valve, air flow meter, intake pressure sensor, etc. Malfunctions or damage to these components can cause unstable idle speed. 4. Fuel system faults: Issues like clogged fuel injectors, blocked fuel filter, obstructed fuel pump screen, faulty fuel pressure regulator, or blocked return line can all lead to incorrect fuel injection, causing the mixture to be too rich or too lean, resulting in unstable idle speed. 5. Ignition system faults: Problems such as faulty ignition module, incorrect spark plug gap, eroded or damaged spark plug electrodes, or excessive resistance in high-voltage wires can reduce ignition spark energy or cause misfires, leading to erratic idle speed fluctuations.

13

1

Share

Which country produces Mitsubishi engines?

Mitsubishi engines are produced by China Shenyang Aerospace Mitsubishi Engine Co., Ltd., established in 1997. 1. Mitsubishi is a Japanese corporate group. 2. The predecessor of the Mitsubishi Group was the Tsukumo Shokai established by Yataro Iwasaki in Tosa Domain. 3. In 1870, Yataro Iwasaki took over the Nagasaki Shipyard operated by the Japanese government and renamed it Mitsubishi Shokai. In 1996, Mitsubishi Motors began cooperating with several Chinese companies. Initially, Mitsubishi partnered with Changfeng Motors to produce the Mitsubishi Pajero series. The Chinese military's Leopard off-road vehicles were improved based on the Mitsubishi Pajero during that time. With the rapid development of China's automotive market, Changfeng hoped for deeper cooperation with Mitsubishi, but to no avail. In 2006, Mitsubishi acquired a portion of Southeast Motors Group's equity, establishing Soueast Mitsubishi. However, Soueast Mitsubishi also struggled, with consistently low sales until GAC stepped in to merge with Changfeng in 2012, saving Mitsubishi. Currently, Mitsubishi operates in the Chinese market through Soueast Mitsubishi and GAC Mitsubishi.

10

5

Share

What Are the Reasons for No Response When Starting the Car?

How to reset the tire pressure monitoring indicator on the Magotan?

What is the tire model used in the Volkswagen Santana?

Which is Better: Wet or Dry Dual Clutch?

How to Install an ETC Device?

What are the causes of unstable idle speed?

Which country produces Mitsubishi engines?

Where to Apply for a Fuel Card?

What is the solution for the P0137 trouble code?

How to Turn on the Air Conditioning Cool Air in the X-Trail?

What is the difference between 1.4t and 2.0t displacement?