What are the reasons for no air coming out of the Peugeot 408 vents?

1 Answers
JanelleAnn
07/30/25 5:55am
The reasons for no air coming out of the Peugeot 408 vents may include abnormal connection of the vent switch, blown fuse of the air conditioning, blocked air vents, or malfunctioning of the air conditioning motor fan. Here are the detailed explanations: 1. Clogged air conditioning filter: The most common reason for no air coming out of the air conditioning is a clogged air conditioning filter. Since external air typically passes through the air conditioning filter before entering the car interior, the filter's main function is to isolate dust, particles, moisture, and other attachments in the air. It also provides strong sterilization and deodorization effects, ensuring that passengers do not inhale harmful gases, which could threaten health and driving safety. The air conditioning filter is usually installed above or below the blower. Therefore, air must pass through it to enter the car. If the filter is clogged, poor air circulation will naturally result in no air coming out. 2. Damaged blower: The blower is a crucial part of the air conditioning system, as the circulation of air inside the car relies on its operation. When using the air conditioning at high fan speeds, a buzzing sound can often be heard from under the passenger seat. This is the sound of the blower working—the higher the air demand, the faster the blower must draw in air. If the blower is damaged, it may not draw in enough air or stop drawing air altogether, preventing air from being blown out and causing the air conditioning to not function. 3. Faulty air door, computer, or switch: The air door is located inside the air duct and, being made of plastic, may get stuck or break. When the air door fails to open, the air drawn in by the blower cannot flow out through the vents, resulting in no air coming out of the air conditioning.
Was this review help?
7
2
Share
More Forum Discussions

How to reset the 'Engine Oil Change Required Soon' message on CRV?

Hold down the TRIP button on the dashboard. The dashboard still displays these words, requiring manual reset. Engine oil needs to be changed immediately. If the issue persists after trying the above methods, there might be a malfunction in the dashboard or the vehicle's computer system.
5
0
Share

How to Use the CR-V Paddle Shifters?

More commonly, the paddle shifters are located on the left and right sides of the steering wheel's inner arc, with both paddles serving the same function. For most mid-to-high-end cars, when using the paddle shifters, you should first place the gear lever into manual mode, usually controlled by a button on the vehicle. When you downshift continuously with the left paddle, the engine RPM will rise sharply, providing sufficient power to quickly overtake slower vehicles ahead.
11
2
Share

How to Connect CarPlay in CRV?

First, start the car and power it on. Simultaneously press the VOL, TEL, and brightness buttons on the center control screen, then wait for a few seconds. Select the second option on the interface. On the new interface, choose "SmartphoneInformation". Navigate to the tab page, select "CarPlay" and turn it on. Return to the center control interface and connect your iPhone to the USB port.
10
5
Share

What do the symbols on a vehicle's dashboard indicate?

The symbols on a vehicle's dashboard indicate the following meanings: 1. Routine indicator lights: These are the most frequently encountered lights, including high/low beam indicators, seatbelt reminder lights, turn signal indicators, and parking brake indicators. Their purpose is to notify the driver about the status of various vehicle functions. They are typically green or blue in color. 2. Warning indicator lights: These lights inform the driver about the vehicle's condition. They are primarily used to indicate the levels of various fluids. When fluid levels are critically low, the vehicle will display a warning indicator on the dashboard, usually in orange or red.
8
2
Share

How to Remove the Oil Change Reminder on a Civic?

The method to eliminate the oil change reminder on a Civic is as follows: 1. First, set the Civic's power to ON mode, then repeatedly press the (Display/Info) button until "Maintenance" appears on the screen; 2. Press the Enter button, and the engine oil monitor will appear on the screen; 3. Finally, hold the Enter button for about 10 seconds, and the Civic oil wrench reminder will be cleared; 4. If the reminder still persists after the oil has been changed, a manual reset is required. With the engine off, hold the reset button without releasing it, then power on the vehicle.
9
4
Share

What Causes the Headlights to Move Up and Down When Starting the Car?

When the headlights move up and down during car startup, this is a normal phenomenon. This action occurs because the vehicle is equipped with an adaptive front lighting system. The adaptive front lighting system performs a self-check every time the car starts to ensure the system functions properly. The adaptive front lighting system is a dynamic lighting system that adjusts the low-beam axis horizontally in coordination with the steering wheel's turning angle and vertically in response to the vehicle's height. In other words, the height of the vehicle's headlights can change according to the vehicle's body height. This prevents the risk of accidents in dark environments due to delayed lighting adjustments when the vehicle's height changes.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.