···
Log in / Register

What are the reasons for insufficient starting power of the Baojun 510?

4 Answers
VonSebastian
07/29/25 11:52pm
The reasons for insufficient starting power of the Baojun 510 are as follows: 1. It may be caused by problems with the engine or transmission, which is a fault-related issue leading to weak starting power and requires timely troubleshooting; 2. It could also be due to the vehicle's small displacement and heavy load, where the starting speed may not reach the boost level, resulting in a feeling of weak starting power, which is a normal phenomenon. The specific reasons for insufficient starting power are as follows: 1. Engine: Carbon buildup is a major culprit causing insufficient engine power and weak starting. Carbon buildup on the throttle valve affects the intake volume; buildup on the spark plugs affects ignition; buildup on the fuel injectors affects fuel injection, and overheated carbon buildup can cause detonation, leading to weak starting power. Therefore, it is advisable to clean the engine's carbon buildup first before looking for other possible causes of weak starting power. 2. Transmission: Clutch failure in the transmission can lead to weak starting power. The clutch's role is to transmit and cut off the engine's power. Manual transmissions, dual-clutch transmissions, etc., use friction plate clutches. Over time, the friction plates wear out severely, causing slippage, which in turn leads to weak starting power.
Was this review help?
10
2
Share
ArianaLee
08/16/25 3:24am
The Baojun 510 feels underpowered during acceleration, which I suspect is likely caused by issues in the fuel system. For example, clogged fuel injectors or low fuel pump pressure can prevent sufficient gasoline from being injected into the engine, resulting in sluggish acceleration from a standstill. Additionally, problems in the engine's ignition system, such as aged or carbon-fouled spark plugs leading to weak ignition, can also affect power output. In terms of the transmission, worn clutch plates reduce the power delivered to the wheels, making the car feel sluggish. Personally, I've noticed this particularly when starting from traffic lights. It's advisable to first check the spark plugs and fuel filter, and to maintain regular upkeep. Moreover, a dirty air filter restricting airflow is a common issue, which can be alleviated by replacing it every 5,000 kilometers. If the problem persists, it's best to visit a workshop for a comprehensive diagnosis to avoid compromising driving safety.
Was this review help?
4
5
Share
Expand All
ClaraMarie
10/19/25 4:36am
My car is a Baojun 510, and the common issue of insufficient starting power is often due to electronic control system failure. If the ECU sensor ages or malfunctions, it may misread data, leading to an imbalance in the air-fuel mixture and insufficient air intake, resulting in noticeable acceleration lag. Additionally, problems with the transmission control module can delay gear shifts, especially causing noticeable stuttering during low-speed starts. Personally, I recommend using an OBD device to read the fault codes, which can quickly pinpoint the issue. During daily driving, I've noticed that the problem worsens in cold weather, possibly due to increased oil viscosity affecting engine response. Moreover, a clogged exhaust system, such as a blocked catalytic converter, can exacerbate power loss, making it crucial to check if emissions are normal. For maintenance, regularly cleaning the throttle body to ensure smooth air intake can significantly improve the starting experience.
Was this review help?
6
3
Share
Expand All
Maddox
12/02/25 5:12am
I think the weak starting power of the Baojun 510 is often related to driving habits and simple maintenance. When starting, avoid stomping on the accelerator; gently pressing it can help the engine deliver power smoothly. Another reason is neglecting routine maintenance, such as a clogged air filter restricting airflow or delayed ignition due to untimely spark plug replacement—these issues can be resolved with simple repairs. Poor fuel quality is also a factor, as low-quality gasoline burns inefficiently, leading to sluggish acceleration. Regularly check if the tire pressure is standard, as low pressure increases rolling resistance and hampers performance. By adopting good driving habits and maintaining the vehicle diligently, most problems can be avoided.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

What car has tires that are 3.75 meters tall?

Having tires that are 3.75 meters tall is the Northern Heavy Duty TR100. Here are the specific details about the tires: 1. Tire function: Tires support the entire weight of the vehicle, bear the load of the car, transmit traction and braking torque, ensure the adhesion between the wheels and the road surface, reduce and absorb the vibrations and impact forces during driving, prevent severe vibrations and early damage to car components, adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring safety, handling stability, comfort, and energy efficiency. 2. Tire maintenance methods: Tire maintenance methods include regularly cleaning stones from the tire treads, reducing exposure to sunlight, frequently checking tire pressure, paying attention to suspension maintenance, regularly inspecting front wheel alignment, and being mindful of driving habits.
19
1
Share

Will the Transmission Get Waterlogged After Wading?

Wading can cause water to enter the transmission. Here are the specific details about the transmission: 1. Definition: The transmission mainly refers to the vehicle's gearbox, which is divided into manual and automatic types. A manual transmission primarily consists of gears and shafts, achieving speed and torque changes through different gear combinations. An automatic transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque changes through hydraulic transmission and gear combinations. 2. Maintenance Methods: Correctly replace the transmission fluid. A better method is dynamic fluid replacement, which uses specialized transmission cleaning equipment to fully circulate the old fluid during operation, drain it completely, and then add new transmission fluid, achieving a replacement rate of over 90% and ensuring good results. Check the automatic transmission fluid level properly. The method for checking automatic transmission fluid differs from engine oil. Engine oil is checked when the vehicle is cold, while transmission fluid needs to be preheated to about 50°C. Then, after shifting the gear lever through each position for 2 seconds and placing it in park, the fluid level on the dipstick should be between the maximum and minimum marks. If it is insufficient, add the same quality fluid promptly.
16
3
Share

Can Wet Dual-Clutch Transmissions Wade Through Water?

Wet dual-clutch transmissions can wade through water, but it's important to pay attention to the water depth. Here are some precautions for using wet dual-clutch transmissions: 1. Avoid stomping on the accelerator in traffic jams: When driving a car with a dual-clutch transmission, if you encounter a traffic jam or need to stop at a traffic light, try to avoid stomping on the accelerator. This can cause the transmission to shift gears frequently, not only creating a jerky sensation but also causing the transmission to overheat too quickly, potentially leading to damage. 2. Press the brake pedal firmly or shift to N gear when temporarily stopping: When temporarily stopping, the brake pedal should be pressed more firmly. If the waiting time is long, you can also shift directly to N gear. If your foot slips on the brake, it might cause the transmission to remain in a semi-engaged state.
11
5
Share

i for intake or e for exhaust?

I stands for intake, which means IN in English, referring to the air entering the engine. E represents exhaust, also the first letter abbreviation of the English word for exhaust. Below are specific details about automotive exhaust pipes: 1. Overview: The exhaust pipe is part of the engine's exhaust system, which mainly includes the exhaust manifold, exhaust pipe, and muffler. Typically, the three-way catalytic converter, which controls engine pollutant emissions, is also installed in the exhaust system. Exhaust pipes generally consist of a front pipe and a rear pipe. 2. Function: For the vehicle's body, the exhaust pipe serves to reduce vibration and noise, as well as extend the lifespan of the exhaust and muffler system. Its working principle involves diverting airflow through multiple channels, where these divided streams rub and collide with each other, gradually reducing the airflow's velocity. This cycle repeats, ultimately allowing the exhaust gases to be emitted through the vehicle's exhaust pipe, thereby reducing noise and achieving the daily noise reduction effect for automobiles.
20
2
Share

What is the Road and Bridge Ticket During Vehicle Inspection?

Road and bridge tickets during vehicle inspection are mandatory fees that must be paid during the use of a vehicle after it has been registered. Below are specific details about vehicle inspection: 1. Definition: The annual vehicle inspection process refers to the fixed procedure that motor vehicles must undergo each year. It is a mandatory test for every vehicle, equivalent to a physical examination for the vehicle, aimed at promptly eliminating potential safety hazards. 2. Notes: If all items pass at once, the process takes about 2 hours; the compulsory traffic insurance policy must be valid; bring all necessary documents and files that might be needed; do not forget to bring the triangular warning sign and fire extinguisher; if the vehicle body has been modified or has non-compliant stickers, please clean them up before going for the annual inspection.
17
3
Share

Is solid color paint 1k or 2k?

Solid color paint is 1k. Below are specific details about solid color paint: 1. Difference from metallic paint: Metallic paint gets its name from the metal powder mixed in it. Not only does metallic paint make the painted surface appear dazzling, but due to light refraction, the car color and even its outline can change when viewed from different angles. Cars that appear reflective under sunlight generally use metallic paint. Another reason many car enthusiasts commonly choose metallic paint is that the addition of metal powder increases the hardness of the paint, making the surface harder, more wear-resistant, and less prone to scratches, whereas solid color paint does not have this effect. 2. Application: Suitable for the surface protection of metals, wood, plastics, and building exteriors, it can also be used as a surface protection and decorative coating for epoxy, polyurethane, acrylic series, and other paints.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.