···
Log in / Register

What are the reasons for insufficient engine power in the Buick Envision?

3 Answers
KeeganFitz
08/28/25 6:57am
When the Envision displays insufficient engine power, there could be numerous potential causes. A 4S dealership needs to use a code reader to retrieve the fault codes to determine the exact issue. Here are several possible reasons: 1. Solenoid valve malfunction: A faulty solenoid valve in the engine oil pan. Solution: Replace the defective solenoid valve. 2. System issues: Problems with any component in the intake system, fuel system, or ignition system could lead to this issue. The Envision currently has 12 models available for sale, categorized under China V and China VI emission standards. The Envision is positioned as a midsize SUV, with body dimensions of 4686mm in length, 1839mm in width, and 1660mm in height, and a wheelbase of 2750mm.
Was this review help?
9
5
Share
MaryRose
09/10/25 5:13am
I remember my Buick Envision also had a lack of power issue before. At that time, when I drove on the highway, the acceleration always felt sluggish, much worse than usual. Later, when I took it to the shop for inspection, they found severe carbon buildup in the engine. Carbon deposits are like a layer of dirt clogging the engine, affecting combustion efficiency and making the car feel weak. Another possible issue could be with the fuel system, such as clogged fuel injectors or poor-quality gasoline, leading to insufficient fuel supply. Additionally, aging spark plugs can cause poor ignition, resulting in an overall decrease in power. These common problems are all related to regular maintenance. I recommend regularly cleaning the throttle body and using good-quality engine oil. It's best to have a comprehensive check-up every six months—don’t wait until a major issue arises. Safety comes first. Also, when driving daily, avoid stomping on the accelerator and sudden acceleration to slow down carbon buildup.
Was this review help?
10
1
Share
Expand All
McPaislee
10/24/25 6:02am
If my Buick Envision feels underpowered, the first thing I would check is the air filter. If that thing gets clogged, it reduces air intake, and the engine can't suck in enough air, which naturally leads to a lack of power. Next would be a turbocharger issue—this car has a turbo, and if it fails, the boost is lost, and the power drops. Also, insufficient or degraded engine oil increases engine friction, affecting performance. I always check the dashboard for any warning lights; it could be a faulty sensor, like an oxygen sensor, causing the ECU to lose control. My advice is to start simple with maintenance—try replacing the air filter or spark plugs. If that doesn’t help, take it to a professional shop for diagnosis immediately. Don’t delay, as it could lead to more damage and higher repair costs.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What is 2.5 bar tire pressure in kPa?

Tire pressure of 2.5 bar is 250 kPa. The methods for tire pressure monitoring include: 1. Direct tire pressure monitoring; 2. Indirect tire pressure monitoring; 3. Using a tire intelligent monitoring system for detection. The effects of excessive tire pressure are: 1. Causes steering wheel vibration and deviation, reducing driving comfort; 2. Reduces tire friction and adhesion, affecting braking performance; 3. Accelerates wear on the central tread pattern of the tire, affecting its service life; 4. Decreases puncture resistance, making it easier for sharp objects like nails or glass to penetrate the tire, leading to internal cracks or blowouts; 5. Overextends the tire cords, reducing elasticity and increasing the load on the car while driving.
19
2
Share

What Causes a Motorcycle to Emit Blue Smoke?

Motorcycle emits blue smoke due to the following reasons: 1. Poor cylinder sealing leading to oil leakage into the cylinder, causing incomplete combustion; 2. Damaged valve guide or seal ring; 3. Excessive oil filling, resulting in more oil splashing onto the cylinder wall; 4. Aging valve oil seal with rubber losing elasticity; 5. Worn cylinder liner or insufficient piston ring tension and misaligned piston rings. The solutions for motorcycle emitting blue smoke are: 1. Replace the cylinder block, piston, piston rings, and cylinder gasket; 2. Check if the valve oil seal is not tightly sealed, and replace it promptly if there is an issue; 3. Use high-quality lubricating oil.
5
1
Share

Where is the air conditioning filter located in the new Buick LaCrosse?

Buick LaCrosse air conditioning filter is located inside the glove compartment on the passenger side. Here is an introduction to replacing the air conditioning filter for the Buick LaCrosse: 1. Pry open the glove compartment from the side. 2. Unscrew the 3 screws on the upper part and the 2 screws on the lower part of the glove compartment using a 7mm socket. 3. Pull the glove compartment towards the passenger seat until the clips loosen. 4. After securing the wires and air conditioning pipe clips, remove the entire glove compartment. 5. Open the clips on the outer side of the air conditioning filter and gently pry both sides of the filter outward with a small screwdriver. 6. The installation steps are the reverse of the disassembly steps.
1
0
Share

How to Use the Automatic Parking Function in Mercedes-Benz Cars?

To use the automatic parking function in Mercedes-Benz cars, follow these steps: When driving at a low speed (below 30 km/h), press the intelligent parking button on the panel next to the driver's seat. The vehicle will automatically search for nearby parking spaces. Once the central display shows the parking space information, select and confirm it. Then, choose to move forward or backward based on the parking position, engage the gear, and adjust the position to park. Taking the Mercedes-Benz C-Class as an example: The Mercedes-Benz C-Class is a mid-size sedan with dimensions of 4784mm in length, 1810mm in width, and 1457mm in height, and a wheelbase of 2920mm. It is a 4-door, 5-seater sedan with a 9-speed automatic transmission.
3
5
Share

How to Open the Focus Trunk from Inside the Car?

Method to open the Focus trunk from inside the car: Press the trunk release button located in the multifunction button area on the left side of the steering wheel. More information about the Focus is as follows: 1. The new-generation Focus 2020 model is equipped with two engines, the 1.5L EcoBoost and the 1.5L Ti-VCT, with all models meeting the China VI emission standards. 2. The new-generation Focus 2020 model features a race-level fine-tuned chassis, a lightweight suspension system, an SLA long and short arm blade rear independent suspension with an independent subframe, an EBD electronic brake force distribution system, and an EPAS electronic power-assisted steering system.
9
4
Share

What do the '+' and '-' signs mean on an automatic transmission car?

Automatic transmission car plus and minus signs refer to the manual mode of the automatic transmission. Here are detailed introductions about automatic transmission: 1. The plus sign is for manual upshifting, and the minus sign is for downshifting. The method is: shift to D gear, push the gear lever to the right, and the transmission enters sports mode; use the forward method to shift gears, push forward to upshift, and push backward to downshift; switch to automatic mode by pushing left to the D gear position. 2. The gears of an automatic transmission car are: P is parking gear and starting gear; R is reverse gear; N is neutral gear; D is drive gear, also called driving gear; L is low gear; S is sports mode; OD is overdrive gear.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.