···
Log in / Register

What are the reasons for insufficient climbing power of Chery Tiggo 5x 1.5L?

3 Answers
LeEli
09/05/25 5:57am
Insufficient climbing power can be caused by too high gear, too low idle speed, unstable idle speed, aging spark plugs, dirty fuel pump or filter, etc. The reasons for insufficient climbing power of Chery Tiggo 5x 1.5L are as follows: Too high gear: When climbing, you should shift to a lower gear and engage D gear. Too low idle speed: It is best to clean the throttle. Dirty fuel pump or filter: If there is engine speed but no power, and the gear is not in N or P, it may be a problem with the clutch or poor engagement of the shift clutch; during the shifting process, if the automated shift conflicts with the driver's shifting intention, it may cause a brief clutch disengagement issue. Try restarting the engine.
Was this review help?
6
0
Share
DeJayla
09/17/25 6:20am
The 1.5L engine in that Chery Tiggo 5X lacks power when climbing hills, and I've handled similar cases at the dealership many times. The most common issue is a clogged air filter; dust and debris buildup restrict air intake, especially on slopes where the engine needs more oxygen to deliver power, but a dirty filter chokes combustion efficiency. Another possibility is spark plug problems—worn-out spark plugs cause incomplete ignition, leading to inefficient fuel burning and a significant drop in power. Also, don’t overlook the transmission; poorly adjusted gears or sluggish shifting can burden the engine during climbs. Carbon buildup is another major culprit—long-term low-speed driving leads to carbon deposits in the cylinders, affecting compression ratio. I recommend checking the air filter first and replacing it immediately if dirty, along with inspecting the spark plugs and cleaning the throttle body. Take it to a professional shop for a comprehensive checkup, and the power issue will be resolved. Using high-quality fuel regularly can also help prevent such problems.
Was this review help?
3
4
Share
Expand All
AdrianaLynn
10/31/25 6:50am
As a car owner, I've been driving my Tiggo for a while and have experienced power lag when climbing hills. I believe it's mostly due to fuel system issues; aging fuel pumps or clogged fuel injectors can cause insufficient fuel supply, especially when demand is high during uphill driving. Overloading is another factor—a fully packed trunk increases the engine's workload, making hill climbs even harder. Tire pressure is also crucial; low pressure increases rolling resistance, forcing the engine to work harder, which leads to higher fuel consumption and weaker performance. Maintenance is key—I regularly clean the fuel filter and replace the air filter, and now I don't struggle on mountain roads anymore. Poor driving habits, like forgetting to downshift and failing to raise the RPM, can also contribute. Checking tire pressure, reducing load, and trying manual mode before climbing can make a big difference.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

Can a Modified Vehicle That Was Caught Still Enjoy Exemption from Inspection?

Modified vehicles that are caught cannot enjoy exemption from inspection. According to China's current regulations, new vehicles have a six-year exemption period during which they do not need to undergo on-site inspections but only need to apply for an exemption mark. However, traffic violations must be resolved before the annual inspection. Cases where the inspection cannot be passed: Vehicles with unresolved traffic violation records cannot pass the annual inspection. Owners must check for any traffic violations and resolve them before the inspection to obtain the exemption mark. Registered motor vehicles undergoing safety technical inspections will not pass if the registered content on the vehicle's license does not match the actual condition of the vehicle, or if the mandatory third-party liability insurance certificate is not provided as required. According to relevant regulations, vehicle owners can apply for an inspection mark at the vehicle management office of the registration location up to three months before the expiration of the inspection period. During the application process, the owner must fill out an application form and submit the vehicle license, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption certificate, and the motor vehicle safety technical inspection certificate.
16
5
Share

When to Start Gear Shifting in Subject Three?

When hearing the voice prompt "Please perform gear shifting," the examinee should adjust the gear to 2nd gear, sequentially upshift to 5th gear, maintain a speed exceeding 40km/h in 5th gear, and then sequentially downshift back to 2nd gear. The relevant instructions are as follows: 1. Remember one principle: Accelerate before upshifting, decelerate before downshifting. Keep in mind one key point: Upshift at multiples of five, downshift at multiples of zero. 2. During upshifting, first gently press the accelerator to increase speed. When the speed reaches 15 km/h, shift to 2nd gear; when reaching 25 km/h, shift to 3rd gear; at 35 km/h, shift to 4th gear; and at 45 km/h, shift to 5th gear. 3. During downshifting, first gently apply the brakes. When the speed drops to 40 km/h, shift to 4th gear; at 30 km/h, shift to 3rd gear; at 20 km/h, shift to 2nd gear; and at 10 km/h, shift to 1st gear.
19
2
Share

Where are the suitable places for beginners to practice driving in Mianyang?

In Mianyang, a suitable place for beginners to practice driving is Hongyue Ruige in the Economic Development Zone. Below are some relevant introductions about practicing driving: 1. Precautions: Quick eyes and fast feet, quick hands. The coordination of throttle and clutch during the parking and starting phase, as well as the following technique at intersections, all require the right foot to be placed on the brake pedal immediately, deciding the intensity of the brake based on the situation, followed by the direction of the body's movement; the sequence and position of actions, as well as the level of coordination, will directly determine driving safety. 2. Technique: Using the rearview mirror, take the midline of the front vehicle's head as a reference. When half of the rear wheel passes this line, start turning the steering wheel fully to reverse, and after the vehicle enters two-thirds, return the steering wheel.
8
2
Share

What to Do When a Sagitar Car Runs Out of Battery?

Sagitar car battery is dead, the vehicle can only be started by replacing the battery, charging the battery, or jump-starting it with another vehicle. Below are the methods for charging a car battery: 1. Prepare a set of jumper cables, which can be purchased at most auto parts stores. 2. Connect one end of the cable clamp to the positive terminal of the dead battery, and the other end to the positive terminal of the rescue vehicle's battery. (Do not reverse this order to prevent a short circuit.) 3. Use another cable to connect one end to the negative terminal of the rescue vehicle's battery and the other end to a metal part of the engine in the dead car (i.e., grounding). 4. After connecting the jumper cables, start the engine of the rescue vehicle and slightly increase the engine speed. After about 5 minutes, the emergency charging for the dead car will be completed. 5. Once charging is finished, remove the jumper cables in the reverse order of how they were connected.
12
4
Share

What to Do When the Sagitar Fuel Tank Won't Open?

Solutions for when the Sagitar fuel tank won't open: 1. If the fuel tank cap won't open, you can start from the trunk. First, remove the trunk lining covering the fuel tank. The lining is usually secured by plastic clips, which can be easily pried off with a screwdriver. 2. After removing the lining, you will see the locking mechanism of the fuel tank cap and the cable used for remote operation. Simply pull the cable to open the fuel tank cap. If this doesn't work, press the movable part of the locking mechanism while continuously pulling the cable, and the fuel tank cap should open easily. Some models have a dedicated switch on the locking mechanism; pressing this switch will open the fuel tank cap. 3. Generally, the trunk is separated from the cabin by the rear seats. Therefore, removing the rear seats allows access from the cabin to the trunk. Once inside the trunk, use a screwdriver to push or rotate the movable parts on the door lock to open it.
20
0
Share

How to Replace the Brake Light on a Toyota Vios?

The method for replacing the brake light on a Vios is as follows: 1. Open the trunk. 2. There is a small cover behind the taillight, inside the trunk. Pry it open. 3. Then rotate the bulb socket. 4. After that, the brake light can be removed. Install the new light by reversing the removal steps. Reasons why the brake light stays on are as follows: 1. Lack of brake fluid: This may also be accompanied by significantly reduced braking power, and in severe cases, a complete loss of braking force. 2. Damaged brake switch: This usually happens when the brake pedal and the brake sensor switch are not properly aligned or when the sensor switch is damaged. 3. Worn or aged brake pads: Worn or aged brake pads can also cause the brake light to stay on. In this case, check the thickness of the brake pads. If the thickness is below the specified value of 0.8cm, there is a risk of the pads breaking during driving, which could be dangerous.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.