What are the reasons for high water temperature in the Reiz?

Can a 4S shop perform dent repair?

4S shops cannot perform dent repair. Here are the methods for repairing car dents: 1. Location and size: Determine the location and size of the car dent. 2. Deep dents: For deeper dents or larger areas, the pulling method can be used. 3. Repair: First, insert the glue stick into the glue gun and heat it for a few minutes. Then, apply the glue from the center to the edges slowly onto the suction cup. Use the residual heat to stick the suction cup to the stress point of the larger dent. Next, connect the T-shaped tool to the head of the suction cup and pull it out evenly with force. The dent will gradually recover. Use a hook under lighting to slowly push out small dented areas, and finally, use a rubber hammer to handle the slightly protruding parts. After a car dent occurs, it is best to seek out a specialized repair shop for the repair.

8

5

Share

What is the difference between Leopard Super Select 4WD and mechanical 4WD?

The differences between Leopard Super Select 4WD and mechanical 4WD are as follows: 1. Quality difference: Traditional mechanical 4WD has a simple structure, reliable performance and quality, can withstand heavy loads, and can handle harsh road conditions for a long time with low maintenance costs; while the biggest advantage of electronic 4WD is its extremely fast response speed, low price, comfort and energy saving, but it is generally only suitable for urban and highway driving, and its reliability is not as good as mechanical 4WD, with high maintenance costs when problems occur. 2. Fuel difference: For fuel vehicles, current urban SUVs need to consider fuel economy, so most models use on-demand 4WD. For electric vehicles, because they do not require mechanical devices such as drive shafts, their 4WD is controlled by motors.

10

2

Share

What Causes the Timing Chain Noise in the Highlander?

The timing chain noise in the Highlander is caused by a lack of tension in the chain tensioner, elongation of the timing chain, or abnormal wear of the guide chain plate. Below are specific details about the timing chain: 1. Function: The engine timing chain drives the valve train of the engine, ensuring that the intake and exhaust valves open or close at the appropriate times to allow normal air intake and exhaust in the engine cylinders. In some models, such as the Volkswagen Jetta, Bora, and Audi, it also drives the water pump. 2. Effects of Timing Chain Elongation: Under high-speed engine operation, the timing chain may stretch, wear, and develop increased gaps. If the timing chain elongates due to these gaps, it can lead to inaccurate timing and increased noise. If the timing chain wears or stretches due to aging, causing timing misalignment, the valve stems may bend, the piston tops may dent, and in severe cases, the cylinder head may be damaged, preventing the engine from functioning properly.

14

0

Share

Is it considered running a red light if the waiting turn area turns red and you proceed?

Entering the waiting turn area when it turns red is not considered running a red light. Vehicles that have crossed the stop line before the green light can continue to proceed. Below is an introduction to motor vehicle traffic signals and non-motor vehicle traffic signals: 1. When the green light is on: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. 2. When the yellow light is on: When the yellow light is on, vehicles that have already crossed the stop line can continue to proceed. 3. When the red light is on: When the red light is on, vehicles are prohibited from proceeding. 4. At intersections without non-motor vehicle or pedestrian crossing signals: At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles can proceed provided they do not obstruct the passage of other vehicles or pedestrians.

2

4

Share

How Much Transmission Fluid Does a Car Need?

A car's required amount of transmission fluid depends on the model and the replacement method. Generally, manual fluid replacement requires 4-6 liters, while using a fluid exchange machine requires about 9-12 liters. Transmission fluid is categorized into automatic transmission fluid (ATF) and manual transmission fluid (MTF). ATF should be replaced every two years or after driving approximately 60,000-80,000 kilometers, while MTF should be replaced every three years or after driving about 80,000-100,000 kilometers. Below are the hazards of not changing automatic transmission fluid for a long time: 1. Prolonged failure to replace transmission fluid can lead to abnormal wear and severe fluid degradation in the transmission. 2. Under high-speed and high-temperature conditions, old transmission fluid can deteriorate and evaporate, accelerating the wear of mechanical components and, in severe cases, damaging internal transmission parts, shortening the car's lifespan. 3. Long-unreplaced transmission fluid can become granular, clogging fluid passages and damaging valve bodies, directly affecting system oil pressure and power transmission, resulting in sluggish response and gear-shifting impacts.

16

1

Share

Where is the Buick Regal Air Conditioning Control Module Located?

Buick Regal air conditioning control module is located at the central control air conditioning panel. The automotive air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle compartment. It provides a comfortable riding environment for passengers, reduces driver fatigue, and enhances driving safety. The air conditioning system has become one of the indicators to measure whether a car is fully equipped. The adjustment methods for Buick Regal air conditioning temperature control are as follows: 1. Cooling and dehumidification: When the air conditioning is turned on, rotate the temperature control dial to set the desired temperature, with a range between 18°C and 32°C. If the air recirculation indicator is off, switch the air circulation mode to the external circulation mode. 2. Heating: Rotate the temperature control dial to set the desired temperature. Do not set the temperature lower than the outside temperature, as this may result in improper temperature control. If the windows fog up, use the defroster to remove the fog instead of using the heater with the air conditioning turned off.

10

2

Share

What are the reasons for high water temperature in the Reiz?

Can a 4S shop perform dent repair?

What is the difference between Leopard Super Select 4WD and mechanical 4WD?

What Causes the Timing Chain Noise in the Highlander?

Is it considered running a red light if the waiting turn area turns red and you proceed?

How Much Transmission Fluid Does a Car Need?

Where is the Buick Regal Air Conditioning Control Module Located?

How Much Fuel Should You Add to Your Car Each Time?

Which fuse is for the Haima Family wiper?

Can You Continue Driving After the Coolant Warning?

How many liters of engine oil does the Geely Xingyue require?