What are the reasons for high fuel consumption in scooter motorcycles?

2 Answers
DiSienna
07/25/25 3:03pm
The reasons for high fuel consumption in scooter motorcycles are as follows: Due to their unique transmission method and engine structure, scooters are bound to consume more fuel compared to cross motorcycles of the same displacement. If a scooter motorcycle's fuel consumption level is higher than other vehicles of the same model, this performance is abnormal. The reasons include the following: Low tire pressure: Low tire pressure increases the vehicle's driving resistance, and increased driving resistance will inevitably lead to higher fuel consumption. Brake gap too small: If the brake gap of a scooter is too small, it can cause the brakes to drag while driving, which also increases driving resistance. Unreasonable driving habits: The rider's driving habits directly affect the vehicle's fuel consumption performance, as the optimal fuel consumption is based on reasonable operation. Only then will the vehicle's fuel consumption performance be relatively optimistic. Vehicle malfunction: If the above reasons are excluded, then the vehicle may have some faults. Vehicle faults can only be identified based on specific symptoms, but generally, they are related to the fuel supply system.
Was this review help?
16
1
Share
DeLawson
08/11/25 9:20pm
Recently, my scooter's fuel consumption suddenly increased, which was quite annoying. I figured the reason might lie in my riding habits—sometimes accelerating or braking too aggressively burns a lot more fuel. Additionally, the air filter was dirty and not cleaned in time, causing poor airflow and forcing the engine to work harder, consuming more fuel. Low tire pressure is also a common issue, increasing rolling resistance and naturally raising fuel consumption. Carrying too much load or using low-quality gasoline can lead to incomplete combustion, while worn-out spark plugs causing poor ignition also reduce efficiency. I need to learn to ride more smoothly, regularly check the air filter and tire pressure, carry less load, and use better-quality fuel—this will save money and improve safety. Developing these habits long-term will also make the scooter more durable and hassle-free.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

Why does the Audi A6 shake when braking?

Audi A6 shaking during braking may be caused by uneven wear of the brake discs. The following are the reasons for brake shaking: Specific causes of brake shaking: For manual transmission vehicles, slight vibration of the brake pedal and clutch pedal is normal when the vehicle is in a low gear with high torque. For automatic transmission vehicles, pedal vibration is also normal when stopping at a red light with the gear in D; shifting to N or P gear will significantly reduce the vibration. Uneven wear of tire treads on both sides or different tire pressures can also cause brake pedal vibration. Deformation of the brake discs can lead to shaking, especially during emergency braking, in which case the brake discs are generally recommended to be replaced. Solutions for brake shaking: Replace shock absorbers, replace spark plugs (as their ignition efficiency may have degraded), tighten loose screws, replace rubber mounts, clean carbon deposits in the engine cylinders, replace spark plugs, and address spark plug carbon buildup or clogging.
12
0
Share

Where is the radiator of Chery located?

The radiator of Chery is located near the engine. The car's radiator, also known as the heat exchanger, is a key component of the vehicle's cooling system. The radiator should not be filled too full: If water is added and filled too much or even completely, it will cause a large amount of overflow due to "thermal expansion," leaving many water marks and scale on the surface. Additionally, adding water can produce scale in the cooling system, blocking the pipes, affecting heat dissipation, and damaging the engine. Generally, the optimal working temperature range for a car engine is between 75-90 degrees Celsius; temperatures higher or lower than this range are not conducive to engine performance. Radiator fluid level: If the level is below the min mark, it is necessary to add the same brand and specification of coolant, or replace it entirely. The choice of coolant mainly depends on the local minimum temperature, and it is usually all-season when leaving the factory. If the radiator does not leak, you may not need to add water throughout the year, but regular checks are still required.
1
5
Share

Why does the BMW window move only when the button is pressed and held?

Glass window regulator switch malfunction, damaged lifting motor, or poor contact in the electrical control wiring harness. It is necessary to check whether the fuse is intact, the control switch, and whether the glass window regulator motor is burnt out. In this case, the window regulator needs to be replaced at a 4S shop or auto repair shop. Introduction to one-touch window operation: One-touch window operation refers to a system where the car window glass can be fully raised or lowered with a single press of a button. Generally, mid-to-high-end models are equipped with this feature, mainly for the convenience of the driver and passengers, and to avoid the driver being distracted by operating the windows, thereby improving safety. Window control switch positions: Cars equipped with one-touch window operation have two positions on the window control switch. The first position works like a regular power window—hold the switch to move the window, and release it to stop at the desired position. The second position allows the window to fully open or close automatically with just a single press and release of the button.
4
4
Share

What are the differences between BMW 1 Series and 3 Series?

BMW 1 Series and 3 Series differ in terms of engine, body dimensions, and drive form. The specific differences are as follows: Different engines: Both the BMW 1 Series and 3 Series are sport-oriented sedans. The BMW 1 Series is equipped with 1.5T and 2.0T engines, while the BMW 3 Series is equipped with a 2.0T engine. Different body dimensions: The latest BMW 1 Series measures 4456X1803X1446mm in length, width, and height, with a wheelbase of 2670mm. The new BMW 3 Series measures 4719X1827X1459mm in length, width, and height, with a wheelbase of 2851mm. It can be seen that there is a significant difference in body dimensions between the two models. Different drive forms: In terms of drive form, the BMW 1 Series adopts a front-engine, front-wheel-drive layout, while the BMW 3 Series adopts a front-engine, rear-wheel-drive layout.
1
1
Share

What are the functions of the buttons inside the Lavida Plus?

The functions of the buttons inside the Lavida Plus include audio control, car phone, etc. Some models also have the cruise control button set on the steering wheel. Resume Button: After temporarily canceling the cruise control, press RES to resume the previously set speed. Set Button: After temporarily canceling the cruise control, press SET to set the current speed as the cruising speed. Deceleration Button: If adaptive cruise control is already activated, use this to reduce the speed. Acceleration Button: If adaptive cruise control is already activated, use this to increase the speed. Cruise Control On/Off Button: Press to turn on the cruise control function. Cancel Button: Press to cancel the cruise control function. Volume Adjustment Buttons: Press to increase or decrease the volume. The left side lowers the volume, and the right side increases it.
2
1
Share

Is the Bumblebee a Convertible?

The Chevrolet Bumblebee has a convertible version. The Chevrolet Bumblebee convertible features a black soft-top design, and when closed, its side profile remains consistent with the hardtop model. It is reported that the convertible system can be opened and closed at speeds below 48km/h and also supports remote operation via the key. Appearance: The Chevrolet Bumblebee convertible is identical to the standard version in appearance, but with the soft top down, the car appears lower and more elongated, enhancing its stylish and muscular American lines. Performance: The Chevrolet Bumblebee convertible offers three powertrain options. The entry-level model is equipped with a 2.0T inline four-cylinder turbocharged engine, delivering a maximum output of 205kW and a peak torque of 400N.m. The mid-range model features a 3.6L V6 naturally aspirated engine, producing a maximum output of 250kW and a peak torque of 385N.m. The high-end model is powered by a 6.2L V8 engine, generating a maximum output of 339kW and a peak torque of 617N.m.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.