What are the reasons for high fuel consumption in gasoline cars?

1 Answers
DeSerenity
07/30/25 9:24am
High temperatures and high humidity in summer seasonally lead to increased fuel consumption. Driving at high speeds and carrying heavy loads also result in higher fuel consumption. Here is relevant information about high fuel consumption in cars: Poor driving habits: Sudden acceleration, hard braking, coasting in neutral, and mismatched speed and gear. Carbon buildup and electronic control system failures: Carbon deposits on throttle bodies, idle valves, and fuel injectors, as well as inaccurate signals from oxygen sensors, intake pressure sensors, and coolant temperature sensors. Lack of regular vehicle maintenance: Failure to replace air filters, fuel filters, spark plugs, and clutch plates in a timely manner can also lead to increased fuel consumption.
Was this review help?
15
0
Share
More Forum Discussions

Is It Critical to Skip Wheel Balancing After Tire Repair?

Wheel balancing is necessary after tire repair. Below are relevant details about wheel balancing: Steering wheel vibration: This can be felt while driving, with the most noticeable symptom being rhythmic wheel hopping, which translates into steering wheel vibration inside the vehicle. When encountering steering wheel vibration, check wheel balancing first. Bearing lifespan reduction: It also affects bearing longevity, potentially causing bearing fatigue over time. In cases of severe imbalance, tires may experience abnormal lateral sway leading to uneven wear, ultimately impacting tire lifespan. In summary, wheel imbalance negatively affects the vehicle itself.
16
4
Share

Where does GAC Trumpchi's engine technology come from?

GAC Trumpchi is a mid-range car brand independently developed by China based on Fiat's technology platform. The Trumpchi engine technology originates from the Italian automaker Alfa Romeo, with some technological modifications made by GAC. It features a dual variable valve timing system for both intake and exhaust, with a maximum power of 108kW and a maximum torque of 187Nm. Relevant information about car engines is as follows: 1. Introduction: The car engine is the device that provides power to the car, serving as the heart of the vehicle. It determines the car's power, fuel economy, stability, and environmental friendliness. Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines. 2. Classification: Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid types, among others.
2
1
Share

Can a 1.5L car go to Tibet?

1.5L naturally aspirated sedans can drive to Tibet by themselves. However, driving on the Sichuan-Tibet line is different from regular self-driving trips. No matter what kind of car it is, you must make some corresponding preparations before departure, mainly in the following aspects: 1. Tires: The roads in Tibet are basically paved with asphalt, and the road conditions are very good. However, due to climate and geological reasons, there are still some gravel roads and dirt roads. These road conditions are quite harsh on highway tires, causing significant wear. Therefore, before departure, check the tread depth of the tires. If the tread is too shallow, it is recommended to replace them with new tires to avoid accidents on the way. 2. Braking system: On the way to Tibet, there will be many uphill and downhill roads, and there will also be relatively steep sections, so the brakes will be used frequently. Before departure, it is recommended to check the thickness of the brake pads. 3. Engine: Due to the low oxygen content at high altitudes, the engine's air intake is reduced, and the engine's power efficiency can only reach about 60% of that in plain areas. Therefore, it is necessary to ensure that the engine is in good condition, such as replacing the engine oil, cleaning carbon deposits, replacing the coolant and aging water pipes to avoid breakdowns on the way.
14
3
Share

What is the introduction of the driving modes for the 7th generation Elantra?

The 7th generation Elantra offers three driving modes: Sport Mode, Eco Mode, and Standard Mode. Below are specific details about the Elantra: 1. Background: The Elantra is a typical South Korean car. As Hyundai's best-selling model overseas, it has gone through six generations. The Beijing Hyundai Elantra is a slightly modified version of its sixth-generation model, adapted for Chinese road conditions and climate, praised for its rich features and relatively high cost-performance ratio. 2. Interior: The Elantra's interior features clean lines, with a fresh beige color scheme. The center console and door armrests are accented with matte metallic trim, giving a stylish appearance. The plastic components on the dashboard are of decent quality, avoiding a particularly cheap feel. However, the assembly quality in some areas could be improved.
6
5
Share

What are the reasons for driver's license downgrade?

Reasons for driver's license downgrade: Receiving 12 or more penalty points within one scoring cycle. Being involved in a major accident resulting in death and bearing 50% or more responsibility. Receiving penalty points for three consecutive scoring cycles without participating in the review. When reaching 60 years of age, the driver's license will automatically be downgraded to a C1 license. A driver's license, also known as a 'driving license,' is a document issued by the government transportation department to individuals qualified to drive, typically in the form of a card. To obtain a driver's license, one must meet the minimum age requirement and pass a driving test. The license usually specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, passenger cars, trucks, buses, etc. If a driver holding a license for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, or large trucks meets any of the above conditions, the vehicle management office shall revoke their highest permitted driving category and notify the driver to complete the downgrade and license replacement procedures within thirty days. After completing the downgrade and license replacement procedures, if the driver wishes to apply for reinstatement of the revoked driving category, they must have no record of accumulating 12 penalty points in the current scoring cycle and the most recent one before application, and must not have been involved in any fatal accident where they bore equal or greater responsibility. Procedure for revoking the highest permitted driving category and completing the downgrade and license replacement: After passing the relevant examination, receive the 'Notification of Illegal Full-Point Examination Information for Motor Vehicle Drivers' (for A and B class licenses, the downgrade information will be noted on the notification). After the suspension period ends, bring the ID card and the 'Notification of Illegal Full-Point Examination Information for Motor Vehicle Drivers' to the traffic police department where the license was suspended to retrieve the driver's license. Bring the following materials to the issuing vehicle management office to complete the downgrade and license replacement procedures (if there are no pending traffic violations, the process will be completed within one working day): Original 'Motor Vehicle Driver's License Application Form.' Original and copy of the driver's identity proof. Original motor vehicle driver's license. Three recent front-facing, bareheaded, white-background color ID photos (if local regulations require submission of a digital photo collection receipt, please submit it as well).
20
4
Share

Can a 4S shop repair a tire?

4S shops can repair tires. The maintenance methods for tires are as follows: 1. Perform four-wheel alignment and tire rotation: Conduct four-wheel alignment and tire rotation every 10,000 kilometers. 2. Regularly check tire pressure: Tire maintenance also includes regular pressure checks. Tires with pressure exceeding the specified range will significantly reduce their service life, while tires with pressure below the specified range will lead to poorer braking performance, difficulty or heaviness in steering, and also reduce the tire's service life. 3. Always pay attention to the tread wear indicators on the tire: The tread wear indicators are located in the main drainage grooves of the tire and are trapezoidal rubber protrusions. When the tread wears down to the level of the wear indicators, the tire must be replaced. During the rainy season, to prevent the vehicle from slipping on wet roads, the tread depth must be maintained above 3mm. 4. Regularly inspect the tire condition: Frequently check the tires to promptly detect any bulges, cracks, cuts, punctures, aging of the valve rubber, or abnormal tire wear. Pay special attention to inspecting the wear on the tire tread and edges.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.