What are the reasons for having power but the car won't start?

How many cylinders does the Haval F7 engine have?

Haval F7 engine has 4 cylinders. An engine is a machine that can convert one form of energy into another more useful form, usually converting chemical energy into mechanical energy. The Haval F7 is a compact SUV with body dimensions of 4620mm in length, 1846mm in width, 1690mm in height, a wheelbase of 2725mm, and tire specifications of 225/65r17. The Haval F7 is equipped with a 1.5L turbocharged engine, with a maximum power of 124kW and a maximum power speed of 5000 to 5600rpm per minute. The maximum torque is 285Nm, and the maximum torque speed is 1400 to 3000rpm per minute. It is matched with a 7-speed dual-clutch transmission.

5

2

Share

Will the warranty be void if the second maintenance is overdue?

The warranty will not be void if the second maintenance is overdue. The required maintenance items include: 1. Replacement of engine oil, oil filter, air filter, fuel filter, transmission fluid, cabin air filter, and engine belt; 2. Inspection of spark plugs; 3. Addition of brake fluid; 4. Cleaning of throttle body and fuel injectors; 5. Inspection of tires, brake pads, brake discs, tire pressure, lighting, chassis, and power steering system. The second maintenance, also known as secondary maintenance or secondary service, refers to the periodic preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle. Its purposes are: 1. To keep the vehicle clean and tidy; 2. To maintain normal technical conditions, eliminate potential hazards, and prevent faults; 3. To slow down the deterioration process and extend the service life.

12

1

Share

What is the engine RPM?

For daily driving of family cars, the engine RPM generally varies around 1500-3000 RPM. Under idling conditions, it should be relatively low, around 800-1500 RPM. Frequently driving at high RPMs will inevitably accelerate engine wear and significantly increase fuel consumption. Related information about engine RPM is as follows: Introduction 1: Engine RPM refers to the torque output of the engine, meaning the RPM of the crankshaft. The engine RPM is measured by electronic sensors. Introduction 2: Within a certain RPM range, the engine's power has a non-linear positive correlation with RPM. The higher the RPM, the greater the horsepower. RPM also reflects the engine's working capacity within a given time. Comparing cars with the same displacement, the higher the power, the higher the RPM, and the faster the car's top speed.

12

5

Share

Where is the Hefei Subject 2 Test Site Located?

Hefei Subject 2 test site is located at the Vehicle Management Office Test Site of the Traffic Police Brigade. Below is a detailed introduction to Subject 2: Time Arrangement: Generally, the Subject 2 test site is divided into morning and afternoon sessions. The morning session runs from 8:00 AM to 12:00 PM, and the afternoon session from 1:00 PM to 6:00 PM. There may be variations in test session times between different regions, so please refer to local policies for specifics. Test Content: The test includes reverse parking, parallel parking, curve driving, right-angle turns, slope parking and starting, and in some regions, a sixth item—highway toll card collection.

10

2

Share

Can You Keep Driving with an Overheated Engine at Idle Speed?

You should not continue driving with an overheated engine at idle speed, as it can lead to reduced power, increased fuel consumption, and accelerated wear of engine components. Specific impacts: Reduced power: When driving in temperatures above 35°C, with a tailwind, or under heavy load at low speeds, engine overheating becomes more severe. This further reduces the engine's air charge coefficient, decreasing the amount of fresh air-fuel mixture entering the cylinders and lowering the average effective pressure in the cylinders, resulting in reduced engine power. When the engine temperature is too high, the lubricating oil that enters the cylinders can form carbon deposits under high-temperature, low-oxygen conditions. These deposits accumulate on the piston crowns, combustion chamber walls, valve heads, and spark plugs, creating hot spots that can cause pre-ignition and abnormal combustion. This can lead to deformation of the engine block and cylinder head, or even cracks or warping, as well as damage to the cylinder head gasket, reducing cylinder pressure at the end of compression and increasing fuel consumption. The lubricating oil can oxidize and degrade due to excessive heat, forming deposits that adhere to the piston rings, cylinder walls, and other friction surfaces, reducing heat conductivity. The viscosity of the oil decreases, oil pressure drops, and lubrication deteriorates. The oil film on the cylinder walls weakens under impact loads, accelerating component wear. Solution: If your car indicates an overheated engine at idle speed, you should slow down immediately and move the car to a shaded or cooler area. Open the hood and let the engine idle until the temperature gradually returns to normal. Once the engine coolant temperature normalizes, the engine will shut off. Wait until the coolant temperature has fully dropped, then check the engine coolant level—it is often severely low at this point. After inspecting the cooling system to confirm no other faults, you can restart the engine and continue driving.

18

2

Share

Is Rust in the Trunk Normal?

Rust in the trunk is a normal occurrence. Here are some precautions to avoid rust: Car chassis: The car chassis is very low and is subjected to sand and stone splashes during driving, uneven road surfaces scraping the bottom, and corrosion from rain and snow, which greatly shortens its service life. It is recommended to not only dry the chassis after washing the car but also to apply anti-rust treatment to the car chassis. Trunk: The car trunk contains items such as spare tires, luggage, and bottled water. During the rainy summer season, the temperature difference between the inside and outside can accumulate a lot of moisture, which can corrode the trunk over time. Car owners should regularly inspect the trunk, frequently air out the trunk carpet, and can also place some desiccants in the trunk to keep it dry. Braking system: After rain or car washing, a large amount of water vapor and moisture can accumulate in the brake fluid reservoir and is easily absorbed by the car's brake fluid. Some brake fluids absorb water severely, causing water droplets to vaporize at high temperatures during braking, leading to brake failure or even complete loss of braking. If it is found that the car's brake fluid has absorbed a significant amount of water, it is advisable to immediately go to a professional repair shop to remove the water.

1

3

Share

What are the reasons for having power but the car won't start?

How many cylinders does the Haval F7 engine have?

Will the warranty be void if the second maintenance is overdue?

What is the engine RPM?

Where is the Hefei Subject 2 Test Site Located?

Can You Keep Driving with an Overheated Engine at Idle Speed?

Is Rust in the Trunk Normal?

What is the status of the vehicle body crossing the line during parallel parking?

What are the body dimensions of the Toyota Highlander?

What brand of engine is used in the Tiggo 8?

What is the smart car brand?