···
Log in / Register

What Are the Reasons for Getting Worse at Subject 2 Practice?

4 Answers
JakeLee
08/26/25 4:26am

Here are the reasons for getting worse at Subject 2 practice: 1. Practicing too much can lead to inconsistent methods: The reference points and operation methods taught by the instructor are based on daily training and accumulation, forming a scientifically proven theory. It is crucial to adhere to the instructor's teaching methods and avoid frequent changes. Practicing too much may result in inconsistent methods, where success relies purely on luck. Accidentally getting it right once might lead to ignoring one's own problems or blindly practicing without following the instructor's guidance, both of which are undesirable. 2. Lack of concentration: Getting worse at Subject 2 practice is directly related to the learner's lack of focus and not putting their heart into the practice. Initially, the learner may be highly focused, but over time, impatience, distraction, and boredom set in, leading to worse performance and loss of confidence. In such cases, it's advisable to take a break, adjust one's state, reflect on oneself, and regain composure before starting the next round of practice. Every practice session requires full attention, focusing on details and accuracy. 3. Practicing too much leads to carelessness: The main reason for getting worse at Subject 2 practice is that after becoming proficient, learners lose the initial sensitivity and become more casual, increasing the likelihood of mistakes. No matter how proficient one becomes in Subject 2, it's essential not to be complacent. Strictly follow the instructor's methods, avoid impatience and creating one's own methods, to prevent "getting worse with practice." Stay calm, learn seriously, and practice diligently.

Was this review help?
13
1
Share
CarlosRose
09/08/25 5:48am

I also experienced getting worse at Subject 2 when learning to drive myself, mainly due to excessive psychological pressure. At first, I was quite motivated during practice, but after a few mistakes, I started feeling anxious. Every time I got in the car, my heart would race, and my hands and feet would shake—especially during high-precision maneuvers like reverse parking. A small mistake would amplify the tension, creating a vicious cycle. When the instructor pointed out errors, I'd panic even more, completely losing focus and messing up all my operations. This is related to mindset—I recommend relaxing a bit, doing some deep breathing or listening to music before practice to ease your nerves. Additionally, record your practice sessions with your phone, review the footage at home in slow motion to analyze mistakes, and don’t rush into more practice. Taking a few days off to reset and then continuing often yields better results. Once your mindset stabilizes, your skills will naturally improve.

Was this review help?
2
1
Share
Expand All
StKimberly
10/22/25 5:52am

Getting worse with more practice in Subject 2 is often due to weak technical foundations. For example, learning quickly at first but failing to correct minor mistakes like turning the steering wheel the wrong way or unstable throttle control, leading to deeply ingrained bad habits. I've seen many people blindly repeat movements during practice, only to become more confused the more they practice, with all flaws exposed under exam pressure. It's recommended to practice step by step: first master single actions like hill-start parking to automaticity, then link them together. Have an experienced observer provide immediate feedback and correct mistakes right away—avoid relying on guesswork. Simulate exam conditions more to increase adaptability. The key is quality over quantity; spending time reflecting is more important than practice time itself, as this helps build correct muscle memory and prevents regression.

Was this review help?
7
3
Share
Expand All
MelanieAnn
12/05/25 6:16am

Fatigue accumulation can cause regression in performance during Subject 2 (parking and maneuvering) training. There was a period when I practiced driving right after work, leading to exhaustion, lack of concentration, and complete disarray in my movements. For example, I misjudged the distance during parallel parking and hit the boundary line, which happened because judgment and reaction slow down when drowsy. It's advisable to plan a reasonable practice schedule—avoid continuous training, ensure sufficient sleep, and take short breaks every half hour to drink water or snack for a mental boost. Practicing when in good physical condition yields higher efficiency. The body is the hardware; neglecting it makes mastering skills difficult.

Was this review help?
1
0
Share
Expand All
More Forum Discussions

What is the difference between 1.4T and 2.0T engines?

Main differences lie in the displacement and output gap. The 1.4T engine has a smaller displacement and lower fuel consumption compared to the 2.0T. However, the 1.4T produces less torque, giving the 2.0T an advantage in terms of power. The primary function of turbocharging is to increase the engine's air intake through a turbocharger, thereby enhancing output power and torque. Below are the key details: 1. Turbocharged Engine: A turbocharged engine refers to an engine equipped with a turbocharger. The turbocharger essentially acts as an air compressor, increasing intake air volume by compressing air. It utilizes the inertial force of exhaust gases to drive a turbine in the turbo chamber, which in turn rotates a coaxial impeller. The impeller pressurizes air delivered through the air filter pipe, forcing it into the cylinders. 2. Key Advantage: The biggest advantage of both 1.4T and 2.0T turbocharged engines is their ability to significantly boost power and torque without increasing engine displacement. Turbocharged engines are not only more fuel-efficient but also reduce emissions of CO (carbon monoxide), CH (hydrocarbons), and PM (particulate matter).
14
2
Share

Is Turbo Necessary for Manual Transmission?

This depends on personal needs. If you like the power delivery method of turbocharged engines, then you should choose a turbocharged engine. If you don't like the power delivery method of turbocharged engines, then you should opt for a naturally aspirated engine. Here are some extended details: 1. Turbocharged engines: Some models equipped with turbocharged engines also come with manual transmission configurations. The power delivery method of turbocharged engines differs from that of naturally aspirated engines. Turbocharged engines can deliver maximum torque at very low RPMs, and at a certain RPM, the turbo suddenly kicks in, causing a sudden surge in power. This power delivery method is why many people prefer turbocharged engines, and also why many dislike them. 2. Lower fuel consumption: If most of your driving is done on city roads, then a turbocharged engine is quite suitable. Since turbocharged engines can deliver significant torque at very low RPMs, this power delivery method is ideal for stop-and-go city driving. If you frequently drive on highways, then you should choose a naturally aspirated engine with a slightly larger displacement. This type of engine is very comfortable for high-speed cruising and also quite fuel-efficient.
2
1
Share

What Octane Gasoline Should the Buick Envision Use?

The Buick Envision should use 92-octane gasoline, as recommended in the vehicle's official owner's manual. In addition to checking the owner's manual for the appropriate gasoline octane rating, you can also find this information on the fuel filler cap. Typically, the gasoline octane can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is even higher, 98-octane gasoline is recommended. However, with the use of new technologies, the compression ratio alone cannot determine the appropriate gasoline octane. Engines with high compression ratios can also be tuned to use lower-octane gasoline due to other influencing factors such as ignition timing, turbocharging technology, and Atkinson cycle technology. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the Buick Envision occasionally uses the wrong gasoline octane, simply switch back to the correct octane after the tank is empty. However, prolonged use of the wrong octane can have the following effects: For vehicles designed for lower-octane gasoline, using higher-octane gasoline will not cause damage, but the increased octane number can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher-octane gasoline, using lower-octane gasoline can cause engine knocking. The significantly lower octane number lowers the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unstably. Mild knocking may only increase noise without obvious engine damage, but noticeable knocking indicates severe engine conditions. The vibrations not only affect driving stability but can also cause abnormal wear on the pistons and cylinders, potentially leading to severe engine damage such as cylinder scoring.
16
1
Share

What is the Ford Mondeo?

Ford Mondeo is a mid-size sedan sold by Ford Motor Company in multiple markets worldwide. Below is relevant information about the Ford Mondeo: 1. Configuration: The 2020 Ford Mondeo upgraded its original 8-inch central control screen to a 12.8-inch one and added the SYNC+ intelligent infotainment system. The SYNC+ system integrates entertainment and audio resources from multiple platforms such as iQiyi, Himalaya, and QQ Music. By binding with the owner's "FordPass" app account, remote vehicle control and exclusive services can be accessed via mobile, including checking vehicle status, remotely starting/locking the car, pre-activating the air conditioning, pushing destinations to the car's system, scheduling maintenance, and requesting roadside assistance. 2. Powertrain: The 2020 Ford Mondeo continues to be equipped with 1.5T and 2.0T turbocharged engines, with maximum power outputs of 134kW and 152kW respectively, and peak torques of 243Nm and 354Nm. Both engines show slight improvements in maximum power and peak torque compared to the current models. The transmission system is paired with a 6-speed automatic transmission, with the lowest comprehensive fuel consumption rated by the MIIT at 7.3L per 100 kilometers.
4
2
Share

Should car maintenance be done at a 4S shop or elsewhere?

It is recommended to have car maintenance done at a 4S shop, as the quality is more guaranteed. Additionally, manufacturers provide a warranty period for new cars, during which any quality issues will be repaired for free. Here is some extended information: 1. Regular maintenance at a 4S shop: If you do not follow the manufacturer's guidelines for regular maintenance at a 4S shop, the warranty will become void. If you go to an external repair shop instead of a 4S shop, the manufacturer cannot determine whether the issue is due to a manufacturing defect or improper maintenance by the repair shop. Therefore, during the new car warranty period, it is essential to have maintenance done at a 4S shop. The length of the warranty period varies by brand; you can check your car's manual or ask the 4S shop directly. 2. More standardized service: Although 4S shops are more expensive, their maintenance staff are professionals who have undergone training before working. Additionally, the costs of repairs and other services are relatively higher, but the service is more standardized. Many parts are sourced directly from the manufacturer, and maintenance is more reliable. If any issues arise, the 4S shop will not let the customer suffer any losses.
20
4
Share

Does Downshifting for Overtaking Damage the Car?

Downshifting for overtaking does not damage the car. Downshifting is necessary before overtaking because it increases the torque on the wheels. When you press the accelerator afterward, the engine's RPM rises, allowing the car to achieve greater acceleration. It can be said that downshifting for overtaking is a good driving technique. Conversely, not downshifting before overtaking and simply pressing the accelerator to speed up can actually harm the engine. Whether it's a manual or automatic transmission car, downshifting is generally required before overtaking. In an automatic transmission car, pressing the accelerator deeply will cause the transmission to downshift automatically, enhancing the car's power. If driving a manual transmission car, the gear should match the driving speed and engine RPM. Shift up if the RPM is too high, and downshift if the RPM is too low. Reasons for downshifting when overtaking: Power and torque are two key parameters of a car's performance. Pressing the accelerator increases the engine's RPM, and higher RPM results in greater power. Downshifting, on the other hand, increases torque. Lower gears provide higher torque, enabling more aggressive acceleration. Therefore, downshifting and pressing the accelerator for overtaking effectively avoids prolonged side-by-side driving with another vehicle, allowing for quicker overtaking.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.