What Are the Reasons for Frequent Tire Blowouts in Cars During Summer?

2 Answers
LydiaLynn
09/06/25 3:40am
Summer is a season when cars are prone to tire blowouts due to the following reasons: 1. Tire pressure does not meet the standard; 2. Overloading; 3. Speeding. Methods for tire maintenance include: 1. Parking in shaded areas; 2. Using sunshade car covers; 3. Regularly checking tire temperature and pressure; 4. Inspecting tires after the temperature gauge indicates high temperatures; 5. Performing regular four-wheel rotation. The functions of tires are: 1. Transmitting driving force, braking force, and steering force to achieve vehicle operation; 2. Supporting vehicle load; 3. Reducing and absorbing vibrations and impacts during driving to avoid severe vibrations damaging car components.
Was this review help?
15
1
Share
SanJasmine
09/18/25 3:38am
I remember last summer when I was driving to work, my tire suddenly blew out, which really startled me. Later, I found out that common causes of summer tire blowouts are mainly due to high temperatures causing increased tire pressure: the air expands too much, exceeding the tire's capacity, leading to a blowout. This is especially noticeable with aging tires, as sunlight exposure makes the rubber brittle and prone to cracking. The road surface also gets extremely hot, and the friction-generated heat adds to the problem. I had neglected regular tire pressure checks, but now I've developed the habit of using a tire pressure gauge to measure once a week when the car is cold, keeping it at the manufacturer's recommended value. When parking, I try to find a shaded spot to avoid direct sunlight. On highways, I reduce speed slightly to minimize tire heat buildup. Safety is no small matter, and taking preventive measures can help avoid danger.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

What causes the P001622 intake camshaft position delay?

P001622 intake camshaft position delay may be caused by timing errors, damaged variable timing solenoid valve, or faulty intake camshaft position sensor. The crankshaft position sensor is one of the most critical sensors in the engine electronic control system, providing signals for ignition timing and confirming crankshaft position, used to detect piston top dead center, crankshaft angle, and engine speed. Below is the removal method for the crankshaft position sensor: 1. During removal: Disconnect the sensor wiring from the main harness near the rear of the intake manifold. 2. Nut: Remove the nut securing the crankshaft position sensor wire clamp on the fuel pipe mounting bolt, then remove the crankshaft position sensor mounting bolt. 3. Sensor: Remove the crankshaft position sensor and detach the wiring harness clamp for the crankshaft position sensor.
20
5
Share

Where to Check the Tire Pressure Display on the X-Trail?

X-Trail tire pressure display can be viewed on the vehicle's dashboard. How the Tire Pressure Monitoring System Works: The tire pressure monitoring system utilizes the sensing function of ABS to compare the rotation counts of the tires. Insufficient tire pressure shortens the tire's circumference, causing it to rotate differently from other tires during driving. Tire Pressure Alarm: The tire pressure monitoring system alerts based on speed sensor comparisons. Tire pressure can be checked with a pressure gauge. While driving, the tire pressure display monitors the inflation pressure. If the inflation pressure in one tire is significantly lower than in the others, the system will trigger an alarm. When the internal tire pressure decreases, the working radius of the wheel changes, altering the wheel's rotation speed.
7
5
Share

Is the interior space of the Panamera spacious?

The interior space of the Panamera is not very large. Dimensions of the Panamera: The body length, width, and height are 5049mm, 1937mm, and 1423mm respectively, with a wheelbase of 2950mm. The body structure is a 5-door, 4-seat hatchback. Powertrain: The Panamera is equipped with a 2.9T twin-turbocharged engine, delivering a maximum horsepower of 330PS, a maximum power output of 243kW, and a maximum torque of 450Nm. It is paired with an 8-speed dual-clutch transmission. The front suspension type is a double-wishbone independent suspension, and the rear suspension type is a multi-link independent suspension.
9
3
Share

What is the fuel consumption of the LaCrosse 2.0T?

The actual fuel consumption of the LaCrosse 2.0T is 10.3L/100KM. The factors affecting fuel consumption and methods to reduce it are introduced as follows: Factors affecting fuel consumption: The heavier the car, the greater the fuel consumption. At the same time, the car engine also has a certain impact on fuel consumption. The better the engine performance, the lower the fuel consumption. Fuel consumption is also related to the driver's habits. Long-term idling, speeding, and sudden braking at high speeds will all increase fuel consumption. Methods to reduce fuel consumption: Pay attention to vehicle maintenance, clean the air filter regularly, avoid long-term idling while driving, and turn off the engine during long traffic light waits.
17
3
Share

What Causes the Loud Engine Noise in MG 3?

The reasons and solutions for the loud engine noise in MG 3 are as follows: Engine Mount Deterioration: After high mileage, the engine mounts may deteriorate. Replacing the engine mounts can solve the problem. Seal Deterioration: If the engine sounds normal from the outside but the noise inside the car is loud, it indicates poor sound insulation. Check the vehicle's seals for any signs of deterioration. Alternatively, improving the vehicle's sealing effect can help reduce the noise. Faulty Cylinder Valves: If the engine produces a dull, tapping-like sound during operation, it may be due to faulty cylinder valves. In this case, the sound may disappear when the car is driven at high speeds.
9
4
Share

Will Mazda Exit the Domestic Market?

No. Here are the details: Introduction: First of all, China is the world's largest automobile market, and the size of the cake means there is room for the development of small manufacturers like Mazda. Exiting China would mean giving up this opportunity. At the same time, Changan Mazda has already established an integrated industrial structure in Nanjing that includes R&D, design, and manufacturing. If Mazda were to exit, it would also represent a huge loss for the company. Additionally, Mazda recognizes that to compete with giants like Toyota and Volkswagen, it must adopt a differentiated competition model, leveraging the long-tail theory to carve out a niche in the market. Expansion: For Mazda, this is an era of major transformation. In terms of technological routes, the potential for internal combustion engines has reached its limit. With competitors fully embracing electrification, how to balance the relationship between old and new technological routes is also an internal challenge for the company.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.